public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
* [U-Boot] [PATCH] ARM: at91: sama5: change the environment address to 0x6000
@ 2015-10-23  9:18 Josh Wu
  2015-10-23 22:43 ` Andreas Bießmann
  2015-10-26  6:43 ` Bo Shen
  0 siblings, 2 replies; 6+ messages in thread
From: Josh Wu @ 2015-10-23  9:18 UTC (permalink / raw)
  To: u-boot

As sama5 board has 32k sram size, so the at91bootstrap and spl for sama5
boards is bigger than 16k (0x4000). That will overlap the U-Boot
environment. So I move environment to 0x6000. And reduce its size as
well.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
---

 include/configs/at91-sama5_common.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h
index a5990ce..0b60f0b 100644
--- a/include/configs/at91-sama5_common.h
+++ b/include/configs/at91-sama5_common.h
@@ -98,8 +98,8 @@
 #elif CONFIG_SYS_USE_SERIALFLASH
 /* u-boot env in serial flash, by default is bus 0 and cs 0 */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET		0x4000
-#define CONFIG_ENV_SIZE			0x4000
+#define CONFIG_ENV_OFFSET		0x6000
+#define CONFIG_ENV_SIZE			0x2000
 #define CONFIG_ENV_SECT_SIZE		0x1000
 #define CONFIG_BOOTCOMMAND		"sf probe 0; "				\
 					"sf read 0x21000000 0x60000 0xc000; "	\
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2015-10-27  5:23 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-10-23  9:18 [U-Boot] [PATCH] ARM: at91: sama5: change the environment address to 0x6000 Josh Wu
2015-10-23 22:43 ` Andreas Bießmann
2015-10-26  6:43 ` Bo Shen
2015-10-26  8:41   ` Josh Wu
2015-10-27  1:55     ` Bo Shen
2015-10-27  5:23       ` Josh Wu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox