From mboxrd@z Thu Jan  1 00:00:00 1970
From: Heiko Schocher <hs@denx.de>
Date: Thu, 29 Oct 2015 11:40:50 +0100
Subject: [U-Boot] [PATCH v1 0/2] arm, imx6,
 aristainetos2: set gpr register after reset
In-Reply-To: <1443177109-4593-1-git-send-email-hs@denx.de>
References: <1443177109-4593-1-git-send-email-hs@denx.de>
Message-ID: <5631F7B2.4080200@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello Stefano,

Am 25.09.2015 um 12:31 schrieb Heiko Schocher:
> setting the gpr 1,8 and 12 registers to a fix value.
> This is needed because after a WDT reset, this registers
> are not correct resettet, and prevent linux from booting
> again.
>
> with this patches no compileerrors found:
> $ ./tools/buildman/buildman -b 20150925 mx6
> boards.cfg is up to date. Nothing to do.
> Building 4 commits for 49 boards (8 threads, 1 job per thread)
> Cloning repo for thread 2
> Cloning repo for thread 3
> Cloning repo for thread 4
> Cloning repo for thread 5
> Cloning repo for thread 6
> Cloning repo for thread 7
>    196    0    0 /196    mx6qsabreauto
> $
>
>
> Heiko Schocher (2):
>    arm, imx: add some gpr register defines
>    arm, imx6, aristainetos2: set gpr register after reset
>
>   arch/arm/include/asm/arch-mx6/imx-regs.h | 35 ++++++++++++++++++++++++++++++++
>   board/aristainetos/aristainetos-v2.c     | 16 +++++++++++++++
>   2 files changed, 51 insertions(+)

Do you have some comments to this patchset, or can it go into mainline?

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany