From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 29 Oct 2015 11:55:17 +0100 Subject: [U-Boot] [PATCH v1 0/2] arm, imx6, aristainetos2: set gpr register after reset In-Reply-To: <5631F7B2.4080200@denx.de> References: <1443177109-4593-1-git-send-email-hs@denx.de> <5631F7B2.4080200@denx.de> Message-ID: <5631FB15.9080705@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 29/10/2015 11:40, Heiko Schocher wrote: > Hello Stefano, > > Am 25.09.2015 um 12:31 schrieb Heiko Schocher: >> setting the gpr 1,8 and 12 registers to a fix value. >> This is needed because after a WDT reset, this registers >> are not correct resettet, and prevent linux from booting >> again. >> >> with this patches no compileerrors found: >> $ ./tools/buildman/buildman -b 20150925 mx6 >> boards.cfg is up to date. Nothing to do. >> Building 4 commits for 49 boards (8 threads, 1 job per thread) >> Cloning repo for thread 2 >> Cloning repo for thread 3 >> Cloning repo for thread 4 >> Cloning repo for thread 5 >> Cloning repo for thread 6 >> Cloning repo for thread 7 >> 196 0 0 /196 mx6qsabreauto >> $ >> >> >> Heiko Schocher (2): >> arm, imx: add some gpr register defines >> arm, imx6, aristainetos2: set gpr register after reset >> >> arch/arm/include/asm/arch-mx6/imx-regs.h | 35 >> ++++++++++++++++++++++++++++++++ >> board/aristainetos/aristainetos-v2.c | 16 +++++++++++++++ >> 2 files changed, 51 insertions(+) > > Do you have some comments to this patchset, or can it go into mainline? > No comment on my side - I will pick'em for inclusion. Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================