[U-Boot] [PATCH v1] board: ti: am57xx: Add board detection logic for am57xx evm

[Nishanth Menon <nm@ti.com>]

On 10/28/2015 06:43 PM, Steve Kipisz wrote:
> Add board detection logic for the AM57xx EVM. More information about
> the EVM can be found here
> http://www.ti.com/tool/tmdxevm5728
> 
> The AM572x Evaluation Module provides an affordable platform to
> quickly start evaluation of Sitara. ARM Cortex-A15 AM57x Processors
> (AM5728, AM5726, AM5718, AM5716) and accelerate development for HMI,
> machine vision, networking, medical imaging and many other industrial
> applications. It is a development platform based on the dual ARM
> Cortex-A15, dual C66x DSP processor that is integrated with tons of
> connectivity such as PCIe, SATA, HDMI, USB 3.0/2.0, Dual Gigabit
> Ethernet, and more.
> 
> The AM572x Evaluation Module also integrates video and 3D/2D graphics
> acceleration, as well as a quad-core Programmable Real-time Unit (PRU)
> and dual ARM Cortex-M4 cores.
> 
> Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
> ---
>  board/ti/am57xx/board.c           | 4 +++-
>  board/ti/am57xx/board.h           | 5 +++++
>  include/configs/ti_omap5_common.h | 2 ++
>  3 files changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
> index 869bbe7..d075a49 100644
> --- a/board/ti/am57xx/board.c
> +++ b/board/ti/am57xx/board.c
> @@ -277,6 +277,8 @@ int board_late_init(void)
>  	 */
>  	if (board_is_x15())
>  		setenv("board_name", "beagle_x15");

The above change depends on a previous patch which introduces
board_is_x15() and then builds on it, However, the patch is not
submitted as a proper series in the right order.

> +	if (board_is_evm())
> +		setenv("board_name", "am57xx_evm");
>  
>  	return 0;
>  }
> @@ -304,7 +306,7 @@ void recalibrate_iodelay(void)
>  		}
>  	}
>  
> -	if (board_is_x15())
> +	if ((board_is_x15() || board_is_evm()))
>  		__recalibrate_iodelay(core_padconf_array_essential,
>  			ARRAY_SIZE(core_padconf_array_essential),
>  			iodelay_cfg_array, ARRAY_SIZE(iodelay_cfg_array));
> diff --git a/board/ti/am57xx/board.h b/board/ti/am57xx/board.h
> index 55719ce..a380a58 100644
> --- a/board/ti/am57xx/board.h
> +++ b/board/ti/am57xx/board.h
> @@ -26,4 +26,9 @@ static inline int board_is_x15(void)
>  {
>  	return !strncmp(am57xx_board_name, "BBRDX15_", HDR_NAME_LEN);
>  }
> +
> +static inline int board_is_evm(void)
> +{
> +	return !strncmp(am57xx_board_name, "AM572PM_", HDR_NAME_LEN);
> +}
>  #endif
> diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
> index 5acbc92..ae6e2a5 100644
> --- a/include/configs/ti_omap5_common.h
> +++ b/include/configs/ti_omap5_common.h
> @@ -120,6 +120,8 @@
>  			"setenv fdtfile dra72-evm.dtb; fi;" \
>  		"if test $board_name = beagle_x15; then " \
>  			"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
> +		"if test $board_name = am57xx_evm; then " \
> +			"setenv fdtfile am57xx-evm.dtb; fi;" \

Further,  no such DTB exists in upstream kernel -> I suggest splitting
out this specific change out of the series and repost once upstream
kernel has support for the same.

>  		"if test $fdtfile = undefined; then " \
>  			"echo WARNING: Could not determine device tree to use; fi; \0" \
>  	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
> 


-- 
Regards,
Nishanth Menon