* [U-Boot] [PATCH 1/2] nios2: clean up macros that do not need a value in board header
@ 2015-10-29 8:45 Thomas Chou
2015-10-29 8:45 ` [U-Boot] [PATCH 2/2] nios2: enable setexpr command in defconfig Thomas Chou
2015-11-03 5:18 ` [U-Boot] [PATCH 1/2] nios2: clean up macros that do not need a value in board header Thomas Chou
0 siblings, 2 replies; 5+ messages in thread
From: Thomas Chou @ 2015-10-29 8:45 UTC (permalink / raw)
To: u-boot
Clean up macros that do not need a value as suggested by
Marek.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
---
include/configs/nios2-generic.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
index 4283c95..144534d 100644
--- a/include/configs/nios2-generic.h
+++ b/include/configs/nios2-generic.h
@@ -35,10 +35,10 @@
/*
* MII/PHY
*/
-#define CONFIG_CMD_MII 1
-#define CONFIG_PHY_GIGE 1
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
-#define CONFIG_PHY_MARVELL 1
+#define CONFIG_CMD_MII
+#define CONFIG_PHY_GIGE
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#define CONFIG_PHY_MARVELL
/*
* BOOTP options
--
2.1.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 2/2] nios2: enable setexpr command in defconfig
2015-10-29 8:45 [U-Boot] [PATCH 1/2] nios2: clean up macros that do not need a value in board header Thomas Chou
@ 2015-10-29 8:45 ` Thomas Chou
2015-10-29 13:15 ` Marek Vasut
2015-11-03 5:18 ` Thomas Chou
2015-11-03 5:18 ` [U-Boot] [PATCH 1/2] nios2: clean up macros that do not need a value in board header Thomas Chou
1 sibling, 2 replies; 5+ messages in thread
From: Thomas Chou @ 2015-10-29 8:45 UTC (permalink / raw)
To: u-boot
Enable setexpr command in defconfig because it is really
useful as suggested by Marek.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
---
configs/nios2-generic_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/configs/nios2-generic_defconfig b/configs/nios2-generic_defconfig
index d4403fc..0a6de6f 100644
--- a/configs/nios2-generic_defconfig
+++ b/configs/nios2-generic_defconfig
@@ -10,7 +10,6 @@ CONFIG_CMD_CPU=y
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
--
2.1.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 2/2] nios2: enable setexpr command in defconfig
2015-10-29 8:45 ` [U-Boot] [PATCH 2/2] nios2: enable setexpr command in defconfig Thomas Chou
@ 2015-10-29 13:15 ` Marek Vasut
2015-11-03 5:18 ` Thomas Chou
1 sibling, 0 replies; 5+ messages in thread
From: Marek Vasut @ 2015-10-29 13:15 UTC (permalink / raw)
To: u-boot
On Thursday, October 29, 2015 at 09:45:48 AM, Thomas Chou wrote:
> Enable setexpr command in defconfig because it is really
> useful as suggested by Marek.
Awww, so much credit in the commit message :)
> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Marek Vasut <marex@denx.de>
> ---
> configs/nios2-generic_defconfig | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/configs/nios2-generic_defconfig
> b/configs/nios2-generic_defconfig index d4403fc..0a6de6f 100644
> --- a/configs/nios2-generic_defconfig
> +++ b/configs/nios2-generic_defconfig
> @@ -10,7 +10,6 @@ CONFIG_CMD_CPU=y
> # CONFIG_CMD_XIMG is not set
> # CONFIG_CMD_FPGA is not set
> # CONFIG_CMD_ITEST is not set
> -# CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> # CONFIG_CMD_NFS is not set
> CONFIG_CMD_PING=y
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 2/2] nios2: enable setexpr command in defconfig
2015-10-29 8:45 ` [U-Boot] [PATCH 2/2] nios2: enable setexpr command in defconfig Thomas Chou
2015-10-29 13:15 ` Marek Vasut
@ 2015-11-03 5:18 ` Thomas Chou
1 sibling, 0 replies; 5+ messages in thread
From: Thomas Chou @ 2015-11-03 5:18 UTC (permalink / raw)
To: u-boot
On 2015?10?29? 16:45, Thomas Chou wrote:
> Enable setexpr command in defconfig because it is really
> useful as suggested by Marek.
>
> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
> ---
> configs/nios2-generic_defconfig | 1 -
> 1 file changed, 1 deletion(-)
>
Applied to u-boot-nios.
> diff --git a/configs/nios2-generic_defconfig b/configs/nios2-generic_defconfig
> index d4403fc..0a6de6f 100644
> --- a/configs/nios2-generic_defconfig
> +++ b/configs/nios2-generic_defconfig
> @@ -10,7 +10,6 @@ CONFIG_CMD_CPU=y
> # CONFIG_CMD_XIMG is not set
> # CONFIG_CMD_FPGA is not set
> # CONFIG_CMD_ITEST is not set
> -# CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_DHCP=y
> # CONFIG_CMD_NFS is not set
> CONFIG_CMD_PING=y
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 1/2] nios2: clean up macros that do not need a value in board header
2015-10-29 8:45 [U-Boot] [PATCH 1/2] nios2: clean up macros that do not need a value in board header Thomas Chou
2015-10-29 8:45 ` [U-Boot] [PATCH 2/2] nios2: enable setexpr command in defconfig Thomas Chou
@ 2015-11-03 5:18 ` Thomas Chou
1 sibling, 0 replies; 5+ messages in thread
From: Thomas Chou @ 2015-11-03 5:18 UTC (permalink / raw)
To: u-boot
On 2015?10?29? 16:45, Thomas Chou wrote:
> Clean up macros that do not need a value as suggested by
> Marek.
>
> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
> ---
> include/configs/nios2-generic.h | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
Applied to u-boot-nios.
> diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
> index 4283c95..144534d 100644
> --- a/include/configs/nios2-generic.h
> +++ b/include/configs/nios2-generic.h
> @@ -35,10 +35,10 @@
> /*
> * MII/PHY
> */
> -#define CONFIG_CMD_MII 1
> -#define CONFIG_PHY_GIGE 1
> -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
> -#define CONFIG_PHY_MARVELL 1
> +#define CONFIG_CMD_MII
> +#define CONFIG_PHY_GIGE
> +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
> +#define CONFIG_PHY_MARVELL
>
> /*
> * BOOTP options
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-11-03 5:18 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-10-29 8:45 [U-Boot] [PATCH 1/2] nios2: clean up macros that do not need a value in board header Thomas Chou
2015-10-29 8:45 ` [U-Boot] [PATCH 2/2] nios2: enable setexpr command in defconfig Thomas Chou
2015-10-29 13:15 ` Marek Vasut
2015-11-03 5:18 ` Thomas Chou
2015-11-03 5:18 ` [U-Boot] [PATCH 1/2] nios2: clean up macros that do not need a value in board header Thomas Chou
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox