[U-Boot] [PATCH 1/3] arm: at91/spl: matrix: move matrix init to separate file

[Josh Wu <josh.wu@atmel.com>]

Hi, Wenyou

On 11/4/2015 2:28 PM, Wenyou Yang wrote:
> To make the matrix initialization code sharing with other SoCs,
> move it from SAMA5D4 particular file,
> mach-at91/armv7/sama5d4_devices.c to a separate file,
> mach-at91/matrix.c
is it possible just move it to mach-at91/armv7/matrix.c, as it is only 
used by armv7 core?

Best Regards,
Josh Wu
>
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> ---
>
>   arch/arm/mach-at91/Makefile                |    2 +-
>   arch/arm/mach-at91/armv7/sama5d4_devices.c |   42 -----------------------
>   arch/arm/mach-at91/matrix.c                |   51 ++++++++++++++++++++++++++++
>   3 files changed, 52 insertions(+), 43 deletions(-)
>   create mode 100644 arch/arm/mach-at91/matrix.c
>
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index 313eb47..649aff2 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -6,7 +6,7 @@ obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o
>   obj-$(CONFIG_AT91SAM9N12) += mpddrc.o spl_at91.o
>   obj-$(CONFIG_AT91SAM9X5) += mpddrc.o spl_at91.o
>   obj-$(CONFIG_SAMA5D3) += mpddrc.o spl_atmel.o
> -obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o
> +obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o matrix.o
>   obj-y += spl.o
>   endif
>   
> diff --git a/arch/arm/mach-at91/armv7/sama5d4_devices.c b/arch/arm/mach-at91/armv7/sama5d4_devices.c
> index 76301d6..52f4862 100644
> --- a/arch/arm/mach-at91/armv7/sama5d4_devices.c
> +++ b/arch/arm/mach-at91/armv7/sama5d4_devices.c
> @@ -10,7 +10,6 @@
>   #include <asm/arch/at91_common.h>
>   #include <asm/arch/at91_pmc.h>
>   #include <asm/arch/clk.h>
> -#include <asm/arch/sama5_matrix.h>
>   #include <asm/arch/sama5_sfr.h>
>   #include <asm/arch/sama5d4.h>
>   
> @@ -48,47 +47,6 @@ void at91_udp_hw_init(void)
>   #endif
>   
>   #ifdef CONFIG_SPL_BUILD
> -void matrix_init(void)
> -{
> -	struct atmel_matrix *h64mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX0;
> -	struct atmel_matrix *h32mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX1;
> -	int i;
> -
> -	/* Disable the write protect */
> -	writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr);
> -	writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr);
> -
> -	/* DDR port 1 ~ poart 7, slave number is: 4 ~ 10 */
> -	for (i = 4; i <= 10; i++) {
> -		writel(0x000f0f0f, &h64mx->ssr[i]);
> -		writel(0x0000ffff, &h64mx->sassr[i]);
> -		writel(0x0000000f, &h64mx->srtsr[i]);
> -	}
> -
> -	/* CS3 */
> -	writel(0x00c0c0c0, &h32mx->ssr[3]);
> -	writel(0xff000000, &h32mx->sassr[3]);
> -	writel(0xff000000, &h32mx->srtsr[3]);
> -
> -	/* NFC SRAM */
> -	writel(0x00010101, &h32mx->ssr[4]);
> -	writel(0x00000001, &h32mx->sassr[4]);
> -	writel(0x00000001, &h32mx->srtsr[4]);
> -
> -	/* Configure Programmable Security peripherals on matrix 64 */
> -	writel(readl(&h64mx->spselr[0]) | 0x00080000, &h64mx->spselr[0]);
> -	writel(readl(&h64mx->spselr[1]) | 0x00180000, &h64mx->spselr[1]);
> -	writel(readl(&h64mx->spselr[2]) | 0x00000008, &h64mx->spselr[2]);
> -
> -	/* Configure Programmable Security peripherals on matrix 32 */
> -	writel(readl(&h32mx->spselr[0]) | 0xFFC00000, &h32mx->spselr[0]);
> -	writel(readl(&h32mx->spselr[1]) | 0x60E3FFFF, &h32mx->spselr[1]);
> -
> -	/* Enable the write protect */
> -	writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr);
> -	writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr);
> -}
> -
>   void redirect_int_from_saic_to_aic(void)
>   {
>   	struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
> diff --git a/arch/arm/mach-at91/matrix.c b/arch/arm/mach-at91/matrix.c
> new file mode 100644
> index 0000000..cf36386
> --- /dev/null
> +++ b/arch/arm/mach-at91/matrix.c
> @@ -0,0 +1,51 @@
> +/*
> + * Copyright (C) 2015 Atmel Corporation
> + *		      Wenyou Yang <wenyou.yang@atmel.com>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/sama5_matrix.h>
> +
> +void matrix_init(void)
> +{
> +	struct atmel_matrix *h64mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX0;
> +	struct atmel_matrix *h32mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX1;
> +	int i;
> +
> +	/* Disable the write protect */
> +	writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr);
> +	writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr);
> +
> +	/* DDR port 1 ~ poart 7, slave number is: 4 ~ 10 */
> +	for (i = 4; i <= 10; i++) {
> +		writel(0x000f0f0f, &h64mx->ssr[i]);
> +		writel(0x0000ffff, &h64mx->sassr[i]);
> +		writel(0x0000000f, &h64mx->srtsr[i]);
> +	}
> +
> +	/* CS3 */
> +	writel(0x00c0c0c0, &h32mx->ssr[3]);
> +	writel(0xff000000, &h32mx->sassr[3]);
> +	writel(0xff000000, &h32mx->srtsr[3]);
> +
> +	/* NFC SRAM */
> +	writel(0x00010101, &h32mx->ssr[4]);
> +	writel(0x00000001, &h32mx->sassr[4]);
> +	writel(0x00000001, &h32mx->srtsr[4]);
> +
> +	/* Configure Programmable Security peripherals on matrix 64 */
> +	writel(readl(&h64mx->spselr[0]) | 0x00080000, &h64mx->spselr[0]);
> +	writel(readl(&h64mx->spselr[1]) | 0x00180000, &h64mx->spselr[1]);
> +	writel(readl(&h64mx->spselr[2]) | 0x00000008, &h64mx->spselr[2]);
> +
> +	/* Configure Programmable Security peripherals on matrix 32 */
> +	writel(readl(&h32mx->spselr[0]) | 0xFFC00000, &h32mx->spselr[0]);
> +	writel(readl(&h32mx->spselr[1]) | 0x60E3FFFF, &h32mx->spselr[1]);
> +
> +	/* Enable the write protect */
> +	writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr);
> +	writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr);
> +}