From: Lokesh Vutla <a0131933@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 4/5] ARM: OMAP4/5: Add generic board detection hook
Date: Thu, 5 Nov 2015 11:19:05 +0530 [thread overview]
Message-ID: <563AEDD1.5080002@ti.com> (raw)
In-Reply-To: <1446674413-28163-5-git-send-email-s-kipisz2@ti.com>
On Thursday 05 November 2015 03:30 AM, Steve Kipisz wrote:
> Many TI EVMs have capability to store relevant board information
> such as DDR description in EEPROM. Further many pad configuration
> variations can occur as part of revision changes in the platform.
> In-order to support these at runtime, we for a board detection hook
> which is available for override from board files that may desire to do
> so.
>
> NOTE: All TI EVMs are capable of detecting board information based on
> early clocks that are configured. However, in case of additional needs
> this can be achieved within the override logic from within the board
> file.
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Thanks and regards,
Lokesh
>
> Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> ---
> v3 Based on:
> master 83bf0057 arm: at91: reworked meesc board support
>
> Changes in v3 (since v2):
> - No changes
>
> v2: http://marc.info/?t=144655344600006&r=1&w=2
> (mailing list squashed original submission)
>
> Changes in v2:
> - New patch
>
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 11 +++++++++++
> arch/arm/include/asm/arch-omap4/sys_proto.h | 1 +
> arch/arm/include/asm/arch-omap5/sys_proto.h | 1 +
> 3 files changed, 13 insertions(+)
>
> diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
> index 91f2dead364b..9e9376d0e6e6 100644
> --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
> +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
> @@ -97,6 +97,16 @@ int arch_cpu_init(void)
> }
> #endif /* CONFIG_ARCH_CPU_INIT */
>
> +/**
> + * do_board_detect() - Detect board description
> + *
> + * Function to detect board description. This is expected to be
> + * overridden in the SoC family board file where desired.
> + */
> +void __weak do_board_detect(void)
> +{
> +}
> +
> /*
> * Routine: s_init
> * Description: Does early system init of watchdog, muxing, andclocks
> @@ -128,6 +138,7 @@ void s_init(void)
> do_io_settings();
> #endif
> setup_early_clocks();
> + do_board_detect();
> prcm_init();
> }
>
> diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
> index 26e9a194f036..fbb52093c65a 100644
> --- a/arch/arm/include/asm/arch-omap4/sys_proto.h
> +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
> @@ -39,6 +39,7 @@ u32 wait_on_value(u32, u32, void *, u32);
> void sdelay(unsigned long);
> void setup_early_clocks(void);
> void prcm_init(void);
> +void do_board_detect(void);
> void bypass_dpll(u32 const base);
> void freq_update_core(void);
> u32 get_sys_clk_freq(void);
> diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
> index 18902628739b..23a33cb233bb 100644
> --- a/arch/arm/include/asm/arch-omap5/sys_proto.h
> +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
> @@ -50,6 +50,7 @@ u32 wait_on_value(u32, u32, void *, u32);
> void sdelay(unsigned long);
> void setup_early_clocks(void);
> void prcm_init(void);
> +void do_board_detect(void);
> void bypass_dpll(u32 const base);
> void freq_update_core(void);
> u32 get_sys_clk_freq(void);
>
next prev parent reply other threads:[~2015-11-05 5:49 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-04 22:00 [U-Boot] [PATCH v3 0/5] ARM: omap-common: Add board detection support for TI EVMs Steve Kipisz
2015-11-04 22:00 ` [U-Boot] [PATCH v3 1/5] ARM: OMAP4/5: Centralize early clock initialization Steve Kipisz
2015-11-05 5:45 ` Lokesh Vutla
2015-11-04 22:00 ` [U-Boot] [PATCH v3 2/5] ARM: OMAP4/5: Centralize gpi2c_init Steve Kipisz
2015-11-05 5:46 ` Lokesh Vutla
2015-11-04 22:00 ` [U-Boot] [PATCH v3 3/5] ARM: omap-common: Add standard access for board description EEPROM Steve Kipisz
2015-11-04 23:43 ` Nishanth Menon
2015-11-05 4:50 ` Nishanth Menon
2015-11-05 6:00 ` Lokesh Vutla
2015-11-05 7:21 ` Nishanth Menon
2015-11-04 22:00 ` [U-Boot] [PATCH v3 4/5] ARM: OMAP4/5: Add generic board detection hook Steve Kipisz
2015-11-05 5:49 ` Lokesh Vutla [this message]
2015-11-04 22:00 ` [U-Boot] [PATCH v3 5/5] board: ti: AM57xx: Add detection logic for AM57xx-evm Steve Kipisz
2015-11-04 23:53 ` [U-Boot] [PATCH v3 0/5] ARM: omap-common: Add board detection support for TI EVMs Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=563AEDD1.5080002@ti.com \
--to=a0131933@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox