[U-Boot] [PATCH v4 3/7] ARM: omap-common: Add standard access for board description EEPROM

[Igor Grinberg <grinberg@compulab.co.il>]

On 11/06/15 02:39, Steve Kipisz wrote:
> From: Lokesh Vutla <lokeshvutla@ti.com>
> 
> Several TI EVMs have EEPROM that can contain board description information
> such as revision, DDR definition, serial number, etc. In just about all
> cases, these EEPROM are on the I2C bus and provides us the opportunity
> to centralize the generic operations involved.
> 
> The on-board EEPROM on the BeagleBone Black, BeagleBone, AM335x EVM,
> AM43x GP EVM, AM57xx-evm, BeagleBoard-X15 share the same format.
> However, DRA-7* EVMs, OMAP4SDP use a modified format.
> 
> We hence introduce logic which is generic between these platforms
> without enforcing any specific format. This allows the boards to use the
> relevant format for operations that they might choose.
> 
> This module will compile for all TI SoC based boards when I2C is enabled,
> even non-TI boards that do not have the EEPROM. If the functions are not
> used, they will not be linked in.
> 
> It is important to note that this logic is fundamental to the board
> configuration process such as DDR configuration which is needed in
> SPL, hence cannot be part of the standard u-boot driver model (which
> is available later in the process). Hence, to aid efficiency, the
> eeprom contents are copied over to SRAM scratchpad memory area at the
> first invocation to retrieve data.
> 
> The follow on patches introduce the use of this library for AM335x,
> AM437x, and AM57xx.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>

Acked-by: Igor Grinberg <grinberg@compulab.co.il>

-- 
Regards,
Igor.