[U-Boot] U-Boot, avr32: compiler warning with

["Andreas Bießmann" <andreas.devel@gmail.com>]

Hi Heiko,

On 11/16/2015 07:29 AM, Heiko Schocher wrote:
> Hello Simon,
> 
> I see an compile error for avr32 on travis.org for current mainline
> U-Boot, see [1].
> 
> git bisecting it, with the information that last working avr32 build
> on travis.org is [2], shows:
> 
> pollux:u-boot hs [(kein Branch, bin?re Suche begonnen bei 20151116)] $
> git bisect log
> git bisect start
> # good: [a5325cd5e91f77a2214e80198ae31c1d8b7e7c3c] configs: Remove
> CONFIG_SERIAL_MULTI
> git bisect good a5325cd5e91f77a2214e80198ae31c1d8b7e7c3c
> # bad: [ae27120c31d58b8bb694d9155bcffdcfae8552a6] Merge
> git://git.denx.de/u-boot-dm
> git bisect bad ae27120c31d58b8bb694d9155bcffdcfae8552a6
> # bad: [bae34335e8aef46d7103907580c40f18f1876bb0] exynos: Remove
> unneeded device tree control #ifdefs
> git bisect bad bae34335e8aef46d7103907580c40f18f1876bb0
> # bad: [f615e6a64d23952d3c68b9ac92b4ef5fa5ebdf8a] dm: power: Add support
> for S5M8767 regulators
> git bisect bad f615e6a64d23952d3c68b9ac92b4ef5fa5ebdf8a
> # bad: [f1ac35b7a6c6bc878d473b5955370b1cc49dba54] exynos: dts: Sync up
> I2C ports with the kernel
> git bisect bad f1ac35b7a6c6bc878d473b5955370b1cc49dba54
> # good: [7fc65bcf8a0a5463db86efbb273a40448c845efc] dm: i2c: Move
> definitions to the top of the header file
> git bisect good 7fc65bcf8a0a5463db86efbb273a40448c845efc
> # bad: [b725dc458f9db44957d4f541d05defe178dda7b5] i2c: Add a mux for
> GPIO-based I2C bus arbitration
> git bisect bad b725dc458f9db44957d4f541d05defe178dda7b5
> # bad: [3d1957f0ea0133ec06f9c6fd85dc1acdf66ad29c] dm: i2c: Add support
> for multiplexed I2C buses
> git bisect bad 3d1957f0ea0133ec06f9c6fd85dc1acdf66ad29c
> # good: [df358c6beca8f7cc2f2b67c54f0bf255ebd5cc22] dm: i2c: Add a
> function to transfer messages
> git bisect good df358c6beca8f7cc2f2b67c54f0bf255ebd5cc22
> # first bad commit: [3d1957f0ea0133ec06f9c6fd85dc1acdf66ad29c] dm: i2c:
> Add support for multiplexed I2C buses
> pollux:u-boot hs [(kein Branch, bin?re Suche begonnen bei 20151116)] $
> 
> Hmm... it seems, that introducing the subdir "muxes" leads into
> this error for avr32 ... I just tried the following patch:

I know about this but had no time to investigate it deeper. It seems
this is a toolchain problem ... and there is no way to get another
toolchain.

> diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
> index 32198bd..811ad9b 100644
> --- a/drivers/i2c/Makefile
> +++ b/drivers/i2c/Makefile
> @@ -40,4 +40,4 @@ obj-$(CONFIG_SYS_I2C_UNIPHIER) += i2c-uniphier.o
>  obj-$(CONFIG_SYS_I2C_UNIPHIER_F) += i2c-uniphier-f.o
>  obj-$(CONFIG_SYS_I2C_ZYNQ) += zynq_i2c.o
> 
> -obj-y += muxes/
> +obj-$(CONFIG_I2C_MUX) += muxes/
> pollux:u-boot hs [20151116] $
> 
> and the error "drivers/i2c/built-in.o: warning: input is not relaxable"
> is gone ...
> 
> Do you have an idea, why this breaks? Is above patch a valid fix?
> (I checked, that all boards using CONFIG_I2C_ARB_GPIO_CHALLENGE have
>  also set CONFIG_I2C_MUX)

For me this is a valid fix. Would you send a proper patch?

Andreas

> 
> bye,
> Heiko
> [1] current U-Boot compile error for avr32 on travis.org:
> https://travis-ci.org/u-boot/u-boot/jobs/90954387
> 
> [2] last working U-Boot compile on travis.org for avr32:
> https://travis-ci.org/u-boot/u-boot/builds/74310800