[U-Boot] [PATCH 04/17] powerpc/82xx/km: add testpin detection for mgcoge3ne

[Heiko Schocher <hs@denx.de>]

Hello Valentin,

Am 13.11.2015 um 15:59 schrieb Valentin Longchamp:
> From: Holger Brunck <holger.brunck@keymile.com>
>
> On mgcoge3ne we also want to start the test application if the testpin
> is asserted. But we don't have a full POST test support yet. So simply
> add a function to read the testpin value.
>
> Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
> ---
>
>   board/keymile/common/common.c | 5 ++++-
>   board/keymile/common/common.h | 2 ++
>   board/keymile/km82xx/km82xx.c | 9 +++++++++
>   3 files changed, 15 insertions(+), 1 deletion(-)

same here ... gpio support would be great.

Reviewed-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
>
> diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
> index b9aff1a..8de129d 100644
> --- a/board/keymile/common/common.c
> +++ b/board/keymile/common/common.c
> @@ -354,8 +354,11 @@ static int do_checktestboot(cmd_tbl_t *cmdtp, int flag, int argc,
>
>   #if defined(CONFIG_POST)
>   	testpin = post_hotkeys_pressed();
> -	s = getenv("test_bank");
>   #endif
> +#if defined(CONFIG_MGCOGE3NE)
> +	testpin = get_testpin();
> +#endif
> +	s = getenv("test_bank");
>   	/* when test_bank is not set, act as if testpin is not asserted */
>   	testboot = (testpin != 0) && (s);
>   	if (verbose) {
> diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h
> index dcfefc4..c74f569 100644
> --- a/board/keymile/common/common.h
> +++ b/board/keymile/common/common.h
> @@ -134,6 +134,8 @@ int wait_for_fpga_config(void);
>   int fpga_reset(void);
>   int toggle_eeprom_spi_bus(void);
>
> +int get_testpin(void);
> +
>   int set_km_env(void);
>   int fdt_set_node_and_value(void *blob,
>   			char *nodename,
> diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c
> index 03cd10c..cc9a7c9 100644
> --- a/board/keymile/km82xx/km82xx.c
> +++ b/board/keymile/km82xx/km82xx.c
> @@ -473,3 +473,12 @@ int ft_board_setup(void *blob, bd_t *bd)
>   	return 0;
>   }
>   #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
> +
> +#if defined(CONFIG_MGCOGE3NE)
> +int get_testpin(void)
> +{
> +	/* Testpin is Port C pin 29 - enable = low */
> +	int testpin = !get_pin(0x00000004, 2);
> +	return testpin;
> +}
> +#endif
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany