From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 14/17] km83xx: use CONFIG_ENV_ADDR for the newenv env command
Date: Mon, 16 Nov 2015 12:05:28 +0100 [thread overview]
Message-ID: <5649B878.70006@denx.de> (raw)
In-Reply-To: <1447426768-23226-15-git-send-email-valentin.longchamp@keymile.com>
Hello Valentin,
Am 13.11.2015 um 15:59 schrieb Valentin Longchamp:
> The hardcoded value are bad, since the address could change between
> different boards.
>
> Furthermore, the relevant #defines are set only if #undefined here, so
> that they can be changed by some boards if required.
>
> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
> ---
>
> include/configs/km/km83xx-common.h | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
Reviewed-by: Heiko Schocher <hs@denx.de>
bye,
Heiko
>
> diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h
> index 2325451..27b47d7 100644
> --- a/include/configs/km/km83xx-common.h
> +++ b/include/configs/km/km83xx-common.h
> @@ -182,10 +182,14 @@
>
> #ifndef CONFIG_SYS_RAMBOOT
> #define CONFIG_ENV_IS_IN_FLASH
> +#ifndef CONFIG_ENV_ADDR
> #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
> CONFIG_SYS_MONITOR_LEN)
> +#endif
> #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
> +#ifndef CONFIG_ENV_OFFSET
> #define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_LEN)
> +#endif
>
> /* Address and size of Redundant Environment Sector */
> #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
> @@ -320,8 +324,8 @@
> CONFIG_KM_DEF_ENV \
> CONFIG_KM_DEF_ARCH \
> "newenv=" \
> - "prot off 0xF00C0000 +0x40000 && " \
> - "era 0xF00C0000 +0x40000\0" \
> + "prot off "__stringify(CONFIG_ENV_ADDR)" +0x40000 && " \
> + "era "__stringify(CONFIG_ENV_ADDR)" +0x40000\0" \
> "unlock=yes\0" \
> ""
>
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2015-11-16 11:05 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-13 14:59 [U-Boot] [PATCH 00/17] km/powerpc: various bugfixes and support for 3 new boards Valentin Longchamp
2015-11-13 14:59 ` [U-Boot] [PATCH 01/17] powerpc/83xx/km: add support for kmvect1 p1a hw version Valentin Longchamp
2015-11-16 10:01 ` Heiko Schocher
2015-11-13 14:59 ` [U-Boot] [PATCH 02/17] powerpc/83xx: add support for kmtepr2 board Valentin Longchamp
2015-11-16 10:01 ` Heiko Schocher
2015-11-16 12:18 ` Holger Brunck
2015-11-13 14:59 ` [U-Boot] [PATCH 03/17] powerpc/82xx: make set/get_pin for km82xx more flexible Valentin Longchamp
2015-11-16 10:06 ` Heiko Schocher
2015-11-13 14:59 ` [U-Boot] [PATCH 04/17] powerpc/82xx/km: add testpin detection for mgcoge3ne Valentin Longchamp
2015-11-16 10:58 ` Heiko Schocher
2015-11-13 14:59 ` [U-Boot] [PATCH 05/17] km/powerpc: increase space for kernel imange and FDT blob Valentin Longchamp
2015-11-16 10:58 ` Heiko Schocher
2015-11-13 14:59 ` [U-Boot] [PATCH 06/17] km/powerpc: move open firmware defines to km-powerpc.h Valentin Longchamp
2015-11-16 10:59 ` Heiko Schocher
2015-11-13 14:59 ` [U-Boot] [PATCH 07/17] km/powerpc: remove unneeded defines Valentin Longchamp
2015-11-16 11:00 ` Heiko Schocher
2015-11-13 14:59 ` [U-Boot] [PATCH 08/17] km/powerpc82xx: remove unused function Valentin Longchamp
2015-11-16 11:01 ` Heiko Schocher
2015-11-13 14:59 ` [U-Boot] [PATCH 09/17] powerpc/km8321: define CONFIG_SYS_DDRCDR Valentin Longchamp
2015-11-16 11:02 ` Heiko Schocher
2015-11-13 14:59 ` [U-Boot] [PATCH 10/17] powerpc/km8321: set the DDRCDR impedance settings back to half strength Valentin Longchamp
2015-11-16 11:02 ` Heiko Schocher
2015-11-16 12:26 ` Holger Brunck
2015-11-16 13:34 ` Tom Rini
2015-11-16 15:41 ` Valentin Longchamp
2015-11-13 14:59 ` [U-Boot] [PATCH 11/17] powerpc/km8309: define CONFIG_SYS_DDRCDR Valentin Longchamp
2015-11-16 11:03 ` Heiko Schocher
2015-11-13 14:59 ` [U-Boot] [PATCH 12/17] powerpc/km8360: fix the ODT parameters for CS0 Valentin Longchamp
2015-11-16 11:03 ` Heiko Schocher
2015-11-13 14:59 ` [U-Boot] [PATCH 13/17] board/keymile/km82xx: setting dip_switch 3 and 4 will run bootloader Valentin Longchamp
2015-11-16 11:04 ` Heiko Schocher
2015-11-13 14:59 ` [U-Boot] [PATCH 14/17] km83xx: use CONFIG_ENV_ADDR for the newenv env command Valentin Longchamp
2015-11-16 11:05 ` Heiko Schocher [this message]
2015-11-13 14:59 ` [U-Boot] [PATCH 15/17] km8309: change the default QE_FW address Valentin Longchamp
2015-11-16 11:05 ` Heiko Schocher
2015-11-13 14:59 ` [U-Boot] [PATCH 16/17] powerpc/83xx: add support for kmtegr1 board Valentin Longchamp
2015-11-16 11:06 ` Heiko Schocher
2015-11-13 14:59 ` [U-Boot] [PATCH 17/17] km/powerpc: fix ft_board_setup prototype for km82xx & km83xx Valentin Longchamp
2015-11-16 11:07 ` Heiko Schocher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5649B878.70006@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox