[U-Boot] [PATCH 01/17] tricorder: rewrite tricordereeprom command

[Heiko Schocher <hs@denx.de>]

Hello Marek,

Am 10.11.2015 um 20:53 schrieb Marek Vasut:
> From: Andreas Bie?mann <andreas.devel@googlemail.com>
>
> This rewrite uses lately promoted eeprom_init(int) function to choose the
> right I2C bus when writing data to the EEPROM.
>
> Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Tom Rini <trini@konsulko.com>
> Cc: Heiko Schocher <hs@denx.de>
> ---
>   board/corscience/tricorder/tricorder-eeprom.c | 36 +++++++--------------------
>   1 file changed, 9 insertions(+), 27 deletions(-)

Reviewed-by: Heiko Schocher <hs@denx.de>

Thanks for this cleanup! ... eeprom code is really ugly ...

bye,
Heiko
>
> diff --git a/board/corscience/tricorder/tricorder-eeprom.c b/board/corscience/tricorder/tricorder-eeprom.c
> index 1c74a0f..340a009 100644
> --- a/board/corscience/tricorder/tricorder-eeprom.c
> +++ b/board/corscience/tricorder/tricorder-eeprom.c
> @@ -77,17 +77,13 @@ static int handle_eeprom_v1(struct tricorder_eeprom *eeprom)
>
>   int tricorder_get_eeprom(int addr, struct tricorder_eeprom *eeprom)
>   {
> -#ifdef CONFIG_SYS_EEPROM_BUS_NUM
>   	unsigned int bus = i2c_get_bus_num();
>   	i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
> -#endif
>
>   	memset(eeprom, 0, TRICORDER_EEPROM_SIZE);
>
>   	i2c_read(addr, 0, 2, (unsigned char *)eeprom, TRICORDER_EEPROM_SIZE);
> -#ifdef CONFIG_SYS_EEPROM_BUS_NUM
>   	i2c_set_bus_num(bus);
> -#endif
>
>   	if (be32_to_cpu(eeprom->magic) != TRICORDER_EEPROM_MAGIC) {
>   		warn_wrong_value("magic", TRICORDER_EEPROM_MAGIC,
> @@ -138,9 +134,6 @@ int tricorder_eeprom_write(unsigned devaddr, const char *name,
>   	int ret;
>   	unsigned char *p;
>   	int i;
> -#ifdef CONFIG_SYS_EEPROM_BUS_NUM
> -	unsigned int bus;
> -#endif
>
>   	memset(eeprom, 0, TRICORDER_EEPROM_SIZE);
>   	memset(eeprom_verify, 0, TRICORDER_EEPROM_SIZE);
> @@ -172,33 +165,23 @@ int tricorder_eeprom_write(unsigned devaddr, const char *name,
>   	print_buffer(0, &eeprom, 1, sizeof(eeprom), 16);
>   #endif
>
> -#ifdef CONFIG_SYS_EEPROM_BUS_NUM
> -	bus = i2c_get_bus_num();
> -	i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
> -#endif
> +	eeprom_init(CONFIG_SYS_EEPROM_BUS_NUM);
>
> -	/* do page write to the eeprom */
> -	for (i = 0, p = (unsigned char *)&eeprom;
> -	     i < sizeof(eeprom);
> -	     i += 32, p += 32) {
> -		ret = i2c_write(devaddr, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
> -				p, min(sizeof(eeprom) - i, 32));
> -		if (ret)
> -			break;
> -		udelay(5000); /* 5ms write cycle timing */
> -	}
> +	ret = eeprom_write(devaddr, 0, (unsigned char *)&eeprom,
> +			TRICORDER_EEPROM_SIZE);
> +	if (ret)
> +		printf("Tricorder: Could not write EEPROM content!\n");
>
> -	ret = i2c_read(devaddr, 0, 2, (unsigned char *)&eeprom_verify,
> +	ret = eeprom_read(devaddr, 0, (unsigned char *)&eeprom_verify,
>   			TRICORDER_EEPROM_SIZE);
> +	if (ret)
> +		printf("Tricorder: Could not read EEPROM content!\n");
>
>   	if (memcmp(&eeprom, &eeprom_verify, sizeof(eeprom)) != 0) {
>   		printf("Tricorder: Could not verify EEPROM content!\n");
>   		ret = 1;
>   	}
>
> -#ifdef CONFIG_SYS_EEPROM_BUS_NUM
> -	i2c_set_bus_num(bus);
> -#endif
>   	return ret;
>   }
>
> @@ -206,7 +189,7 @@ int do_tricorder_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
>   {
>   	if (argc == 3) {
>   		ulong dev_addr = simple_strtoul(argv[2], NULL, 16);
> -		eeprom_init();
> +
>   		if (strcmp(argv[1], "read") == 0) {
>   			int rcode;
>
> @@ -220,7 +203,6 @@ int do_tricorder_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
>   		char *version = argv[4];
>   		char *serial = argv[5];
>   		char *interface = NULL;
> -		eeprom_init();
>
>   		if (argc == 7)
>   			interface = argv[6];
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany