From mboxrd@z Thu Jan  1 00:00:00 1970
From: Heiko Schocher <hs@denx.de>
Date: Mon, 16 Nov 2015 12:27:44 +0100
Subject: [U-Boot] [PATCH 07/17] eeprom: Pull out the I/O code
In-Reply-To: <1447185213-5799-7-git-send-email-marex@denx.de>
References: <1447185213-5799-1-git-send-email-marex@denx.de>
 <1447185213-5799-7-git-send-email-marex@denx.de>
Message-ID: <5649BDB0.6020805@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello Marek,

Am 10.11.2015 um 20:53 schrieb Marek Vasut:
> Pull out the code which does the I2C or SPI read/write, so that
> the beefy ifdef around it is contained in a single function.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Tom Rini <trini@konsulko.com>
> Cc: Heiko Schocher <hs@denx.de>
> ---
>   common/cmd_eeprom.c | 50 +++++++++++++++++++++++++++++++-------------------
>   1 file changed, 31 insertions(+), 19 deletions(-)


Reviewed-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
>
> diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
> index 728606e..7797d0e 100644
> --- a/common/cmd_eeprom.c
> +++ b/common/cmd_eeprom.c
> @@ -61,6 +61,34 @@ void eeprom_init(void)
>   #endif
>   }
>
> +static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
> +			   uchar *buffer, unsigned len, bool read)
> +{
> +	int ret = 0;
> +
> +	/* SPI */
> +#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
> +	if (read)
> +		spi_read(addr, alen, buffer, len);
> +	else
> +		spi_write(addr, alen, buffer, len);
> +#else	/* I2C */
> +
> +#if defined(CONFIG_SYS_I2C_EEPROM_BUS)
> +	i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS);
> +#endif
> +
> +	if (read)
> +		ret = i2c_read(addr[0], offset, alen - 1, buffer, len);
> +	else
> +		ret = i2c_write(addr[0], offset, alen - 1, buffer, len);
> +
> +	if (ret)
> +		ret = 1;
> +#endif
> +	return ret;
> +}
> +
>   int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
>   {
>   	unsigned end = offset + cnt;
> @@ -114,15 +142,8 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
>   			len = maxlen;
>   #endif
>
> -#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
> -		spi_read (addr, alen, buffer, len);
> -#else
> -#if defined(CONFIG_SYS_I2C_EEPROM_BUS)
> -		i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS);
> -#endif
> -		if (i2c_read(addr[0], offset, alen - 1, buffer, len))
> -			rcode = 1;
> -#endif
> +		rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 1);
> +
>   		buffer += len;
>   		offset += len;
>   	}
> @@ -197,17 +218,8 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
>   			len = maxlen;
>   #endif
>
> -#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
> -		spi_write (addr, alen, buffer, len);
> -#else
> +		rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 0);
>
> -#if defined(CONFIG_SYS_I2C_EEPROM_BUS)
> -		i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS);
> -#endif
> -		if (i2c_write(addr[0], offset, alen - 1, buffer, len))
> -			rcode = 1;
> -
> -#endif
>   		buffer += len;
>   		offset += len;
>
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany