[U-Boot] [PATCH 08/17] eeprom: Pull out address computation

[Heiko Schocher <hs@denx.de>]

Hello Marek,

Am 10.11.2015 um 20:53 schrieb Marek Vasut:
> Pull out the code computing the EEPROM address into separate function
> so that it's not duplicated.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Tom Rini <trini@konsulko.com>
> Cc: Heiko Schocher <hs@denx.de>
> ---
>   common/cmd_eeprom.c | 64 ++++++++++++++++++++++-------------------------------
>   1 file changed, 26 insertions(+), 38 deletions(-)


Reviewed-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
>
> diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
> index 7797d0e..5979993 100644
> --- a/common/cmd_eeprom.c
> +++ b/common/cmd_eeprom.c
> @@ -61,6 +61,28 @@ void eeprom_init(void)
>   #endif
>   }
>
> +static int eeprom_addr(unsigned dev_addr, unsigned offset, uchar *addr)
> +{
> +	unsigned blk_off;
> +	int alen;
> +
> +	blk_off = offset & 0xff;	/* block offset */
> +#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
> +	addr[0] = offset >> 8;		/* block number */
> +	addr[1] = blk_off;		/* block offset */
> +	alen = 2;
> +#else
> +	addr[0] = offset >> 16;		/* block number */
> +	addr[1] = offset >>  8;		/* upper address octet */
> +	addr[2] = blk_off;		/* lower address octet */
> +	alen = 3;
> +#endif	/* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
> +
> +	addr[0] |= dev_addr;		/* insert device address */
> +
> +	return alen;
> +}
> +
>   static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
>   			   uchar *buffer, unsigned len, bool read)
>   {
> @@ -94,6 +116,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
>   	unsigned end = offset + cnt;
>   	unsigned blk_off;
>   	int rcode = 0;
> +	uchar addr[3];
>
>   	/*
>   	 * Read data until done or would cross a page boundary.
> @@ -106,26 +129,8 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
>   		unsigned maxlen;
>   #endif
>
> -#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
> -		uchar addr[2];
> -
> -		blk_off = offset & 0xFF;	/* block offset */
> -
> -		addr[0] = offset >> 8;		/* block number */
> -		addr[1] = blk_off;		/* block offset */
> -		alen	= 2;
> -#else
> -		uchar addr[3];
> -
>   		blk_off = offset & 0xFF;	/* block offset */
> -
> -		addr[0] = offset >> 16;		/* block number */
> -		addr[1] = offset >>  8;		/* upper address octet */
> -		addr[2] = blk_off;		/* lower address octet */
> -		alen	= 3;
> -#endif	/* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
> -
> -		addr[0] |= dev_addr;		/* insert device address */
> +		alen = eeprom_addr(dev_addr, offset, addr);
>
>   		len = end - offset;
>
> @@ -156,6 +161,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
>   	unsigned end = offset + cnt;
>   	unsigned blk_off;
>   	int rcode = 0;
> +	uchar addr[3];
>
>   #if defined(CONFIG_SYS_EEPROM_WREN)
>   	eeprom_write_enable (dev_addr,1);
> @@ -172,26 +178,8 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
>   		unsigned maxlen;
>   #endif
>
> -#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
> -		uchar addr[2];
> -
>   		blk_off = offset & 0xFF;	/* block offset */
> -
> -		addr[0] = offset >> 8;		/* block number */
> -		addr[1] = blk_off;		/* block offset */
> -		alen	= 2;
> -#else
> -		uchar addr[3];
> -
> -		blk_off = offset & 0xFF;	/* block offset */
> -
> -		addr[0] = offset >> 16;		/* block number */
> -		addr[1] = offset >>  8;		/* upper address octet */
> -		addr[2] = blk_off;		/* lower address octet */
> -		alen	= 3;
> -#endif	/* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
> -
> -		addr[0] |= dev_addr;		/* insert device address */
> +		alen = eeprom_addr(dev_addr, offset, addr);
>
>   		len = end - offset;
>
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany