[U-Boot] [PATCH 14/17] eeprom: Pull out the RW loop

[Heiko Schocher <hs@denx.de>]

Hello Marek,

Am 10.11.2015 um 20:53 schrieb Marek Vasut:
> Unify the code for doing read/write into single function, since the
> code for both the read and write is almost identical. This again
> trims down the code duplication.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Tom Rini <trini@konsulko.com>
> Cc: Heiko Schocher <hs@denx.de>
> ---
>   common/cmd_eeprom.c | 51 +++++++++++++++++++++------------------------------
>   1 file changed, 21 insertions(+), 30 deletions(-)

Reviewed-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
>
> diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
> index b39ca5d..d0942ef 100644
> --- a/common/cmd_eeprom.c
> +++ b/common/cmd_eeprom.c
> @@ -146,38 +146,44 @@ static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
>   	return ret;
>   }
>
> -int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
> +static int eeprom_rw(unsigned dev_addr, unsigned offset, uchar *buffer,
> +		     unsigned cnt, bool read)
>   {
>   	unsigned end = offset + cnt;
> +	unsigned alen, len;
>   	int rcode = 0;
>   	uchar addr[3];
>
> -	/*
> -	 * Read data until done or would cross a page boundary.
> -	 * We must write the address again when changing pages
> -	 * because the next page may be in a different device.
> -	 */
>   	while (offset < end) {
> -		unsigned alen, len;
> -
>   		alen = eeprom_addr(dev_addr, offset, addr);
>
>   		len = eeprom_len(offset, end);
>
> -		rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 1);
> +		rcode = eeprom_rw_block(offset, addr, alen, buffer, len, read);
>
>   		buffer += len;
>   		offset += len;
> +
> +		if (!read)
> +			udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
>   	}
>
>   	return rcode;
>   }
>
> -int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
> +int eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
>   {
> -	unsigned end = offset + cnt;
> -	int rcode = 0;
> -	uchar addr[3];
> +	/*
> +	 * Read data until done or would cross a page boundary.
> +	 * We must write the address again when changing pages
> +	 * because the next page may be in a different device.
> +	 */
> +	return eeprom_rw(dev_addr, offset, buffer, cnt, 1);
> +}
> +
> +int eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
> +{
> +	int ret;
>
>   	eeprom_write_enable(dev_addr, 1);
>
> @@ -186,25 +192,10 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
>   	 * We must write the address again when changing pages
>   	 * because the address counter only increments within a page.
>   	 */
> -
> -	while (offset < end) {
> -		unsigned alen, len;
> -
> -		alen = eeprom_addr(dev_addr, offset, addr);
> -
> -		len = eeprom_len(offset, end);
> -
> -		rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 0);
> -
> -		buffer += len;
> -		offset += len;
> -
> -		udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
> -	}
> +	ret = eeprom_rw(dev_addr, offset, buffer, cnt, 1);
>
>   	eeprom_write_enable(dev_addr, 0);
> -
> -	return rcode;
> +	return ret;
>   }
>
>   static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany