[U-Boot] [PATCH v2 10/16] drivers: mtd: spi: sf_probe: add compatible for spansion spi flash

[Mugunthan V N <mugunthanvnm@ti.com>]

On Tuesday 17 November 2015 02:38 AM, Simon Glass wrote:
> Hi,
> 
> On 12 November 2015 at 05:48, Tom Rini <trini@konsulko.com> wrote:
>> On Thu, Nov 12, 2015 at 02:42:41PM +0530, Mugunthan V N wrote:
>>> On Friday 06 November 2015 05:37 PM, Simon Glass wrote:
>>>> Hi Mugunthan,
>>>>
>>>> On 4 November 2015 at 01:16, Mugunthan V N <mugunthanvnm@ti.com> wrote:
>>>>> Add compatible for spansion 32MiB spi flash s25fl256s1.
>>>>>
>>>>> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
>>>>> ---
>>>>>  drivers/mtd/spi/sf_probe.c | 1 +
>>>>>  1 file changed, 1 insertion(+)
>>>>>
>>>>> diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
>>>>> index c000c53..9cfa9b6 100644
>>>>> --- a/drivers/mtd/spi/sf_probe.c
>>>>> +++ b/drivers/mtd/spi/sf_probe.c
>>>>> @@ -502,6 +502,7 @@ static const struct dm_spi_flash_ops spi_flash_std_ops = {
>>>>>
>>>>>  static const struct udevice_id spi_flash_std_ids[] = {
>>>>>         { .compatible = "spi-flash" },
>>>>> +       { .compatible = "s25fl256s1" },
>>>>
>>>> Instead, is it possible to add "spi-flash" to the list of compatible
>>>> strings in your device tree?
>>>>
>>>
>>> The compatible "spi-flash" is not defined/documented in kernel and
>>> compatible "s25fl256s1" is already documented and present in dt files.
>>> So it will be good to follow the same dt compatibles in U-Boot so that
>>> future merge/sync will be easier.
>>
>> Agreed.
> 
> I see this in kernel upstream at present:
> 
> git grep s25fl256s1
> arch/arm/boot/dts/dra7-evm.dts:         compatible = "s25fl256s1";
> arch/arm/boot/dts/dra72-evm.dts:                compatible = "s25fl256s1";
> arch/arm/boot/dts/qcom-ipq8064-ap148.dts:
>          compatible = "s25fl256s1";
> arch/powerpc/boot/dts/fsl/kmcoge4.dts:
> compatible = "spansion,s25fl256s1";
> drivers/mtd/devices/m25p80.c:   {"s25fl256s1"}, {"s25fl512s"},
> {"s25sl12801"}, {"s25fl008k"},
> drivers/mtd/devices/st_spi_fsm.c:       { "s25fl256s1", 0x010219,
> 0x4d01,  64 * 1024, 512,
> drivers/mtd/spi-nor/spi-nor.c:  { "s25fl256s1", INFO(0x010219, 0x4d01,
>  64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> 
> There seems to be some confusion as to whether to include "spansion"
> or not. I feel it should be included.
> 
> The problem is that in U-Boot at present this compatible string does
> not affect any behaviour. We still scan the chip to figure out its
> type from its ID. Do you want to add a .data value for it, and skip
> the probing, or are you just trying to trigger the driver to bind?
> 

These compatibles are just used to bind the driver as spi-flash
compatible is not present/documented in Kernel.

Regards
Mugunthan V N