[U-Boot] [PATCH v2 00/15] km/powerpc: various bugfixes and support for 3 new boards

[Heiko Schocher <hs@denx.de>]

Hello Valentin,

for the hole serie:

Reviewed-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
Am 17.11.2015 um 10:53 schrieb Valentin Longchamp:
> A few bugfixes have been done for the km_kirkwood bards in the last
> months and this series collects them all to be sumbitted to mainline.
> Furthermore, support for 2 new Keymile ppc boards are added:
> - kmtepr2: based on a 8321, this is another variation of tuxx1
> - kmtegr1: based on 8309, similarly to kmvect1 but with a lot of
>    different peripherals
>
> Changes in v2:
> - Removed merge conflict files in commit message
> - Squashed commit 9/17 and 10/17 together into a single commit
> - Rewritten commit message to get rid of internal git commit reference
> - Removed support for kmvect1_p1a: not relevant anymore
>
> Bagavathiannan Palanisamy (1):
>    board/keymile/km82xx: setting dip_switch 3 and 4 will run bootloader
>
> Christoph Dietrich (1):
>    powerpc/83xx: add support for kmtepr2 board
>
> Holger Brunck (6):
>    powerpc/82xx: make set/get_pin for km82xx more flexible
>    powerpc/82xx/km: add testpin detection for mgcoge3ne
>    km/powerpc: increase space for kernel imange and FDT blob
>    km/powerpc: move open firmware defines to km-powerpc.h
>    km/powerpc: remove unneeded defines
>    km/powerpc82xx: remove unused function
>
> Valentin Longchamp (7):
>    powerpc/km8321: define CONFIG_SYS_DDRCDR
>    powerpc/km8309: define CONFIG_SYS_DDRCDR
>    powerpc/km8360: fix the ODT parameters for CS0
>    km83xx: use CONFIG_ENV_ADDR for the newenv env command
>    km8309: change the default QE_FW address
>    powerpc/83xx: add support for kmtegr1 board
>    km/powerpc: fix ft_board_setup prototype for km82xx & km83xx
>
>   board/keymile/common/common.c      |  5 ++-
>   board/keymile/common/common.h      |  2 ++
>   board/keymile/km82xx/km82xx.c      | 57 ++++++++++++++-------------------
>   board/keymile/km83xx/MAINTAINERS   |  2 ++
>   board/keymile/km83xx/km83xx.c      |  2 --
>   configs/kmtegr1_defconfig          |  4 +++
>   configs/kmtepr2_defconfig          |  4 +++
>   include/configs/km/km-powerpc.h    | 10 ++++--
>   include/configs/km/km8309-common.h | 12 +++++--
>   include/configs/km/km8321-common.h |  6 ++++
>   include/configs/km/km83xx-common.h | 11 ++++---
>   include/configs/km82xx.h           |  3 --
>   include/configs/km8360.h           |  4 +--
>   include/configs/suvd3.h            | 65 +++++++++++++++++++++++++++++++++++---
>   include/configs/tuxx1.h            | 43 +++++++++++++++++++++----
>   15 files changed, 167 insertions(+), 63 deletions(-)
>   create mode 100644 configs/kmtegr1_defconfig
>   create mode 100644 configs/kmtepr2_defconfig
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany