From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Tue, 17 Nov 2015 11:57:46 +0100 Subject: [U-Boot] [PATCH v2 00/15] km/powerpc: various bugfixes and support for 3 new boards In-Reply-To: <1447754018-12365-1-git-send-email-valentin.longchamp@keymile.com> References: <1447754018-12365-1-git-send-email-valentin.longchamp@keymile.com> Message-ID: <564B082A.7040300@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Valentin, for the hole serie: Reviewed-by: Heiko Schocher bye, Heiko Am 17.11.2015 um 10:53 schrieb Valentin Longchamp: > A few bugfixes have been done for the km_kirkwood bards in the last > months and this series collects them all to be sumbitted to mainline. > Furthermore, support for 2 new Keymile ppc boards are added: > - kmtepr2: based on a 8321, this is another variation of tuxx1 > - kmtegr1: based on 8309, similarly to kmvect1 but with a lot of > different peripherals > > Changes in v2: > - Removed merge conflict files in commit message > - Squashed commit 9/17 and 10/17 together into a single commit > - Rewritten commit message to get rid of internal git commit reference > - Removed support for kmvect1_p1a: not relevant anymore > > Bagavathiannan Palanisamy (1): > board/keymile/km82xx: setting dip_switch 3 and 4 will run bootloader > > Christoph Dietrich (1): > powerpc/83xx: add support for kmtepr2 board > > Holger Brunck (6): > powerpc/82xx: make set/get_pin for km82xx more flexible > powerpc/82xx/km: add testpin detection for mgcoge3ne > km/powerpc: increase space for kernel imange and FDT blob > km/powerpc: move open firmware defines to km-powerpc.h > km/powerpc: remove unneeded defines > km/powerpc82xx: remove unused function > > Valentin Longchamp (7): > powerpc/km8321: define CONFIG_SYS_DDRCDR > powerpc/km8309: define CONFIG_SYS_DDRCDR > powerpc/km8360: fix the ODT parameters for CS0 > km83xx: use CONFIG_ENV_ADDR for the newenv env command > km8309: change the default QE_FW address > powerpc/83xx: add support for kmtegr1 board > km/powerpc: fix ft_board_setup prototype for km82xx & km83xx > > board/keymile/common/common.c | 5 ++- > board/keymile/common/common.h | 2 ++ > board/keymile/km82xx/km82xx.c | 57 ++++++++++++++------------------- > board/keymile/km83xx/MAINTAINERS | 2 ++ > board/keymile/km83xx/km83xx.c | 2 -- > configs/kmtegr1_defconfig | 4 +++ > configs/kmtepr2_defconfig | 4 +++ > include/configs/km/km-powerpc.h | 10 ++++-- > include/configs/km/km8309-common.h | 12 +++++-- > include/configs/km/km8321-common.h | 6 ++++ > include/configs/km/km83xx-common.h | 11 ++++--- > include/configs/km82xx.h | 3 -- > include/configs/km8360.h | 4 +-- > include/configs/suvd3.h | 65 +++++++++++++++++++++++++++++++++++--- > include/configs/tuxx1.h | 43 +++++++++++++++++++++---- > 15 files changed, 167 insertions(+), 63 deletions(-) > create mode 100644 configs/kmtegr1_defconfig > create mode 100644 configs/kmtepr2_defconfig > -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany