[U-Boot] [PATCH] pci: fix address range check in __pci_hose_phys_to_bus()

[Ivan Mercier <ivan.mercier@nexvision.fr>]

Well done Marcel!
I didn't have much more time to investigate on it.
OK with nvidia jetson TK1 with i210 AND RTL8169.


On 18/11/2015 15:19, Bin Meng wrote:
> On Wed, Nov 18, 2015 at 10:05 PM, Marcel Ziswiler
> <marcel.ziswiler@toradex.com> wrote:
>> The address range check may overflow if the memory region is located at
>> the top of the 32-bit address space. This can e.g. be seen on TK1 if
>> using the E1000 gigabit Ethernet driver where start and size are both
>> 0x80000000 leading to the following messages:
>>
>> Apalis TK1 # tftpboot $loadaddr test_file
>> Using e1000#0 device
>> TFTP from server 192.168.10.1; our IP address is 192.168.10.2
>> Filename 'test_file'.
>> Load address: 0x80408000
>> Loading: pci_hose_phys_to_bus: invalid physical address
>>
>> This patch fixes this by changing the order of the addition vs.
>> subtraction in the range check just like already done in
>> __pci_hose_bus_to_phys().
>>
>> Reported-by: Ivan Mercier <ivan.mercier@nexvision.fr>
>> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>> ---
>>
>>   drivers/pci/pci_common.c | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/pci/pci_common.c b/drivers/pci/pci_common.c
>> index a64792f..2a14902 100644
>> --- a/drivers/pci/pci_common.c
>> +++ b/drivers/pci/pci_common.c
>> @@ -268,7 +268,7 @@ int __pci_hose_phys_to_bus(struct pci_controller *hose,
>>                  bus_addr = phys_addr - res->phys_start + res->bus_start;
>>
>>                  if (bus_addr >= res->bus_start &&
>> -                   bus_addr < res->bus_start + res->size) {
>> +                   (bus_addr - res->bus_start) < res->size) {
>>                          *ba = bus_addr;
>>                          return 0;
>>                  }
>> --
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
>