[U-Boot] [PATCH v6 00/23] Bring up rk3036 uboot

[hl <hl@rock-chips.com>]

Hi Simon,


On 19/11/15 12:44, Simon Glass wrote:
> Hi Lin,
>
>
> On 17 November 2015 at 18:19, hl <hl@rock-chips.com> wrote:
>> Hi Simon,
>>
>>
>>
>> On 18/11/15 01:38, Simon Glass wrote:
>>> Hi Lin,
>>>
>>> On 16 November 2015 at 23:20, Lin Huang <hl@rock-chips.com> wrote:
>>>> This series patch bring up rk3036 uboot, since rk3036 only 4K size
>>>> SRAM for SPL, so in SPL stage only support timer, uart, sdram driver,
>>>> and back to bootrom when finish ddr initial, and boot up second stage
>>>> from bootrom.You can boot to command line(mmc info etc) for now use
>>>> this patchset.
>>>>
>>>> Jeffy Chen (2):
>>>>     rockchip: Add max spl size & spl header configs
>>>>     rockchip: Add support for rk's second level loader
>>>>
>>>> Lin Huang (21):
>>>>     rockchip: add timer driver
>>>>     rockchip: move SYS_MALLOC_F_LEN to rk3288 own Kconfig
>>>>     rockchip: rename board-spl.c to rk3288-board-spl.c
>>>>     rockchip: add config decide whether to build common.c
>>>>     dm: core: Add SPL Kconfig for REGMAP and SYSCON
>>>>     rockchip: serial driver support rk3036
>>>>     rockchip: Bring in RK3036 device tree file includes and bindings
>>>>     rockchip: rk3036: Add clock driver
>>>>     rockchip: rk3036: Add header files for GRF
>>>>     rockchip: rk3036: Add Soc reset driver
>>>>     rockchip: rk3036: Add a simple syscon driver
>>>>     rockchip: rk3036: Add pinctrl driver
>>>>     mmc: dw_mmc: move data transfer as a separate function
>>>>     mmc: dw_mmc: support fifo mode in dwc mmc driver
>>>>     rockchip: mmc: use non-removable property to disginguish emmc and
>>>>       sdcard register
>>>>     rockchip: mmc: get the fifo mode and fifo depth property from dts
>>>>     rockchip: add early uart driver
>>>>     rockchip: add rk3036 sdram driver
>>>>     rockchip: rk3036: Add core Soc start-up code
>>>>     rockchip: Add basic support for evb-rk3036 board
>>>>     rockchip: doc: show packet rk3036 uboot image
>>>>
>>>>    arch/arm/dts/Makefile                             |   3 +-
>>>>    arch/arm/dts/rk3036-sdk.dts                       |  46 ++
>>>>    arch/arm/dts/rk3036.dtsi                          | 428 ++++++++++++
>>>>    arch/arm/include/asm/arch-rockchip/cru_rk3036.h   | 168 +++++
>>>>    arch/arm/include/asm/arch-rockchip/grf_rk3036.h   | 493 ++++++++++++++
>>>>    arch/arm/include/asm/arch-rockchip/sdram_rk3036.h | 341 ++++++++++
>>>>    arch/arm/include/asm/arch-rockchip/timer.h        |  22 +
>>>>    arch/arm/include/asm/arch-rockchip/uart.h         |  44 ++
>>>>    arch/arm/mach-rockchip/Kconfig                    |  28 +-
>>>>    arch/arm/mach-rockchip/Makefile                   |  10 +-
>>>>    arch/arm/mach-rockchip/board-spl.c                | 294 ---------
>>>>    arch/arm/mach-rockchip/board.c                    |   1 +
>>>>    arch/arm/mach-rockchip/rk3036-board-spl.c         |  55 ++
>>>>    arch/arm/mach-rockchip/rk3036/Kconfig             |  23 +
>>>>    arch/arm/mach-rockchip/rk3036/Makefile            |  13 +
>>>>    arch/arm/mach-rockchip/rk3036/reset_rk3036.c      |  45 ++
>>>>    arch/arm/mach-rockchip/rk3036/save_boot_param.S   |  32 +
>>>>    arch/arm/mach-rockchip/rk3036/sdram_rk3036.c      | 764 ++++++++++++++++++++++
>>>>    arch/arm/mach-rockchip/rk3036/syscon_rk3036.c     |  21 +
>>>>    arch/arm/mach-rockchip/rk3288-board-spl.c         | 277 ++++++++
>>>>    arch/arm/mach-rockchip/rk3288/Kconfig             |   9 +
>>>>    arch/arm/mach-rockchip/rk_early_print.c           |  63 ++
>>>>    arch/arm/mach-rockchip/rk_timer.c                 |  48 ++
>>>>    board/evb_rk3036/evb_rk3036/Kconfig               |  15 +
>>>>    board/evb_rk3036/evb_rk3036/MAINTAINERS           |   0
>>>>    board/evb_rk3036/evb_rk3036/Makefile              |   7 +
>>>>    board/evb_rk3036/evb_rk3036/evb_rk3036.c          |  49 ++
>>>>    configs/chromebook_jerry_defconfig                |   2 +
>>>>    configs/evb-rk3036_defconfig                      |  26 +
>>>>    configs/firefly-rk3288_defconfig                  |   2 +
>>>>    configs/sandbox_defconfig                         |   2 +
>>>>    doc/README.rockchip                               |  11 +
>>>>    drivers/clk/Makefile                              |   1 +
>>>>    drivers/clk/clk_rk3036.c                          | 414 ++++++++++++
>>>>    drivers/core/Kconfig                              |  19 +
>>>>    drivers/core/Makefile                             |   4 +-
>>>>    drivers/mmc/dw_mmc.c                              | 140 ++--
>>>>    drivers/mmc/rockchip_dw_mmc.c                     |  27 +-
>>>>    drivers/pinctrl/Kconfig                           |   9 +
>>>>    drivers/pinctrl/rockchip/Makefile                 |   1 +
>>>>    drivers/pinctrl/rockchip/pinctrl_rk3036.c         | 276 ++++++++
>>>>    drivers/serial/serial_rockchip.c                  |   1 +
>>>>    include/configs/evb_rk3036.h                      |  12 +
>>>>    include/configs/rk3036_common.h                   | 103 +++
>>>>    include/configs/rk3288_common.h                   |   8 +-
>>>>    include/dt-bindings/clock/rk3036-cru.h            | 186 ++++++
>>>>    include/dwmmc.h                                   |   5 +
>>>>    tools/Makefile                                    |   6 +
>>>>    tools/rkcommon.c                                  |  26 +-
>>>>    tools/rkcommon.h                                  |   4 +-
>>>>    tools/rkimage.c                                   |   2 +-
>>>>    tools/rksd.c                                      |   6 +-
>>>>    tools/rkspi.c                                     |   6 +-
>>>>    53 files changed, 4222 insertions(+), 376 deletions(-)
>>>>    create mode 100644 arch/arm/dts/rk3036-sdk.dts
>>>>    create mode 100644 arch/arm/dts/rk3036.dtsi
>>>>    create mode 100644 arch/arm/include/asm/arch-rockchip/cru_rk3036.h
>>>>    create mode 100644 arch/arm/include/asm/arch-rockchip/grf_rk3036.h
>>>>    create mode 100644 arch/arm/include/asm/arch-rockchip/sdram_rk3036.h
>>>>    create mode 100644 arch/arm/include/asm/arch-rockchip/timer.h
>>>>    create mode 100644 arch/arm/include/asm/arch-rockchip/uart.h
>>>>    delete mode 100644 arch/arm/mach-rockchip/board-spl.c
>>>>    create mode 100644 arch/arm/mach-rockchip/rk3036-board-spl.c
>>>>    create mode 100644 arch/arm/mach-rockchip/rk3036/Kconfig
>>>>    create mode 100644 arch/arm/mach-rockchip/rk3036/Makefile
>>>>    create mode 100644 arch/arm/mach-rockchip/rk3036/reset_rk3036.c
>>>>    create mode 100644 arch/arm/mach-rockchip/rk3036/save_boot_param.S
>>>>    create mode 100644 arch/arm/mach-rockchip/rk3036/sdram_rk3036.c
>>>>    create mode 100644 arch/arm/mach-rockchip/rk3036/syscon_rk3036.c
>>>>    create mode 100644 arch/arm/mach-rockchip/rk3288-board-spl.c
>>>>    create mode 100644 arch/arm/mach-rockchip/rk_early_print.c
>>>>    create mode 100644 arch/arm/mach-rockchip/rk_timer.c
>>>>    create mode 100644 board/evb_rk3036/evb_rk3036/Kconfig
>>>>    create mode 100644 board/evb_rk3036/evb_rk3036/MAINTAINERS
>>>>    create mode 100644 board/evb_rk3036/evb_rk3036/Makefile
>>>>    create mode 100644 board/evb_rk3036/evb_rk3036/evb_rk3036.c
>>>>    create mode 100644 configs/evb-rk3036_defconfig
>>>>    create mode 100644 drivers/clk/clk_rk3036.c
>>>>    create mode 100644 drivers/pinctrl/rockchip/pinctrl_rk3036.c
>>>>    create mode 100644 include/configs/evb_rk3036.h
>>>>    create mode 100644 include/configs/rk3036_common.h
>>>>    create mode 100644 include/dt-bindings/clock/rk3036-cru.h
>>>>
>>>> --
>>>> 1.9.1
>>>>
>>> Everything looks good except patch 15 which I think needs a few
>>> tweaks. Can you please take a look? Either you could send a new
>>> version of just that patch, or I can fix it up when applying it.
>>>
>>> It would be good to get this applied this week if possible.
>>     I will update patch 15 and upload new version today, thank you.
> A few more problems....I've had to update two of the patches. I'll
> resend them to the list and have pushed everything to
> u-boot-rockchip/testing. Please take a look and let me know if there
> are any problems. Otherwise I'll push to master tomorrow or Friday.
     Thank you for your updating, i have download the latest code and
     test, it can work, there is not problem. Thanks again.
>
> Regards,
> Simon
>
>
>

-- 
Lin Huang