From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 19 Nov 2015 18:09:57 +0100 Subject: [U-Boot] MX6ULEVK does not boot In-Reply-To: References: Message-ID: <564E0265.5000900@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fabio, On 19/11/2015 17:13, Fabio Estevam wrote: > On Thu, Nov 19, 2015 at 1:58 PM, Fabio Estevam wrote: >> Hi Peng, >> >> Just noticed that mx6ulevk is not booting with latest U-boot: >> >> U-Boot SPL 2016.01-rc1-00078-g736d174 (Nov 19 2015 - 13:45:19) >> Trying to boot from MMC >> spl: mmc block read error >> SPL: failed to boot from all boot devices >> ### ERROR ### Please RESET the board ### >> >> I haven't had a chance to investigate/debug this yet. > > Looks like I cannot boot using my SanDisk micro SD card. I changed the > SD card and now it boots. I can confirm you this weirdness. It depends on the SD Card, I have seen the same on a iMX6 Dual. It does not boot with industrial card (Pretec, 1Gb), no problems with "HC" cards of any size (Toshiba, Sandisk, Hama,..). Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================