[U-Boot] MX6ULEVK does not boot

[Stefano Babic <sbabic@denx.de>]

Hi Fabio,

On 19/11/2015 18:15, Fabio Estevam wrote:
> 
> It is interesting that I do not see the problem if I don't use SPL.

Confirmed, I see the same. It looks like that the BootROM can, but SPL
no. I supposed an isseu with the frequency, and I set it in SPL to
25Mhz, but it does not help.

> 
> For example: on a mx6qsabresd I can boot the SanDisk card without
> issues if I boot the mx6qbsabresd_deconfig target (u-boot.imx binary).
> 
> However, if I try booting the mx6sabresd_spl_defconfig (SPL +
> u-boot.img) the boot fails with the same error as I noticed on the
> mx6ul board.
> 
> So it seems this is is SPL MMC related problem.

Right, I see the same.

Bet regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================