From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 19 Nov 2015 18:29:30 +0100 Subject: [U-Boot] MX6ULEVK does not boot In-Reply-To: References: <564E0265.5000900@denx.de> Message-ID: <564E06FA.7080802@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fabio, On 19/11/2015 18:15, Fabio Estevam wrote: > > It is interesting that I do not see the problem if I don't use SPL. Confirmed, I see the same. It looks like that the BootROM can, but SPL no. I supposed an isseu with the frequency, and I set it in SPL to 25Mhz, but it does not help. > > For example: on a mx6qsabresd I can boot the SanDisk card without > issues if I boot the mx6qbsabresd_deconfig target (u-boot.imx binary). > > However, if I try booting the mx6sabresd_spl_defconfig (SPL + > u-boot.img) the boot fails with the same error as I noticed on the > mx6ul board. > > So it seems this is is SPL MMC related problem. Right, I see the same. Bet regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================