From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Mon, 23 Nov 2015 16:42:42 +0100 Subject: [U-Boot] Zynq: Unable to boot from MMC In-Reply-To: <5652EA13.2070406@xilinx.com> References: <5652EA13.2070406@xilinx.com> Message-ID: <565333F2.7080205@monstr.eu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 23.11.2015 11:27, Michal Simek wrote: > Hi Jagan, > > On 23.11.2015 10:20, Jagan Teki wrote: >> Hi Moritz, >> >> On 23 November 2015 at 01:15, Moritz Fischer wrote: >>> Hi Jagan, >>> >>> >>> >>> On Sun, Nov 22, 2015 at 6:25 AM, Jagan Teki wrote: >>>> Hi Michal, >>>> >>>> I'm unable to boot the zynq board from MMC, here is my trails: >>>> 1. zynq-boot-bin.py -o boot.bin -u spl/u-boot-spl-dtb.bin >>>> copied boot.bin and u-boot-dtb.img on to sd card >>>> >>> >>> try reverting 9ac4fc82071ce346e3885118242ff45d22f69b82. I ran into >>> this friday and was pointed to that >>> by a colleague. >> >> Still the same issue, here is the reverted commit >> >> Revert "board_init: Change the logic to setup malloc_base" >> >> This reverts commit 9ac4fc82071ce346e3885118242ff45d22f69b82. >> >> > > I have reported problem with SPL in my pull request to Tom last week. > I have tested current HEAD. When you revert that sha1 reported above it > is just working directly in MMC bootmode on zc702. > > On Friday Philip tried the same on zedboard and it was working fine for > him too. > > I still don't know exactly where the problem is because I haven't spent > on it any time - just bisecting commit ID which was the first broken one. Look at this patch I have just sent. ARM: zynq: Fix location of stack and malloc areas Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: