From: "Andreas Bießmann" <andreas.devel@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6] arm: atmel: Add SAMA5D2 Xplained board
Date: Mon, 23 Nov 2015 17:28:45 +0100 [thread overview]
Message-ID: <56533EBD.10508@googlemail.com> (raw)
In-Reply-To: <1446170152-20774-1-git-send-email-wenyou.yang@atmel.com>
Hi Wenyou,
On 30.10.15 02:55, Wenyou Yang wrote:
> The board supports following features:
> - Boot media support: SD card/e.MMC/SPI flash,
> - Support LCD display (optional, disabled by default),
> - Support ethernet,
> - Support USB mass storage.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
I'll fix a few checkpatch warnings while applying
Andreas
> ---
> The patch is based on the following patches sent in mailing list.
> [PATCH] gpio: atmel: Add the PIO4 driver support
> [PATCH] arm: at91: Change the Chip ID registers' addresses
> [PATCH v4] mmc: atmel: Add atmel sdhci support
> [PATCH v3] arm: at91: clock: Add the generated clock support
>
> Changes in v6:
> 1./ change function invocation due to its declaration change,
> at91_enable_periph_generated_clk().
>
> Changes in v5:
> 1./ remove wrong pin config for USB hw init.
>
> Changes in v4:
> 1./ remove __weak attribute for has_lcdc() added in v3.
> 2./ remove unused goto err_exit.
>
> Changes in v3:
> 1./ change defines-->definitions for more clearly in asm/arch/sama5d2.h.
> 2./ remove unused cpu_is_sama5d2x() macros.
> 3./ fix spelling error "adress".
> 4./ add __weak attribute for has_lcdc().
> 5./ remove SPL configs.
>
> Changes in v2:
> 1./ re-order SAMA5D2 statements alphabetically.
> 2./ remove redundant "Unknown CPU type".
> 3./ rework sama5d2's macros.
> 4./ remove some #ifdef before functions.
> 5./ move CONFIG_CMD_SF to Kconfig.
> 6./ remove NAND macros from config file.
> 7./ CONFIG_BOOTCOMMAND for sf uses defines in at91-sama5_common.h.
>
> arch/arm/mach-at91/Kconfig | 5 +
> arch/arm/mach-at91/armv7/Makefile | 1 +
> arch/arm/mach-at91/armv7/sama5d2_devices.c | 59 +++++
> arch/arm/mach-at91/include/mach/at91_pmc.h | 9 +-
> arch/arm/mach-at91/include/mach/atmel_usba_udc.h | 3 +-
> arch/arm/mach-at91/include/mach/hardware.h | 2 +
> arch/arm/mach-at91/include/mach/sama5d2.h | 203 ++++++++++++++++
> board/atmel/sama5d2_xplained/Kconfig | 15 ++
> board/atmel/sama5d2_xplained/MAINTAINERS | 7 +
> board/atmel/sama5d2_xplained/Makefile | 8 +
> board/atmel/sama5d2_xplained/sama5d2_xplained.c | 284 ++++++++++++++++++++++
> configs/sama5d2_xplained_mmc_defconfig | 11 +
> configs/sama5d2_xplained_spiflash_defconfig | 11 +
> include/configs/sama5d2_xplained.h | 122 ++++++++++
> 14 files changed, 734 insertions(+), 6 deletions(-)
> create mode 100644 arch/arm/mach-at91/armv7/sama5d2_devices.c
> create mode 100644 arch/arm/mach-at91/include/mach/sama5d2.h
> create mode 100644 board/atmel/sama5d2_xplained/Kconfig
> create mode 100644 board/atmel/sama5d2_xplained/MAINTAINERS
> create mode 100644 board/atmel/sama5d2_xplained/Makefile
> create mode 100644 board/atmel/sama5d2_xplained/sama5d2_xplained.c
> create mode 100644 configs/sama5d2_xplained_mmc_defconfig
> create mode 100644 configs/sama5d2_xplained_spiflash_defconfig
> create mode 100644 include/configs/sama5d2_xplained.h
next prev parent reply other threads:[~2015-11-23 16:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-30 1:55 [U-Boot] [PATCH v6] arm: atmel: Add SAMA5D2 Xplained board Wenyou Yang
2015-11-23 16:28 ` Andreas Bießmann [this message]
2015-11-24 1:30 ` Yang, Wenyou
2015-11-30 21:28 ` [U-Boot] [U-Boot,v6] " Andreas Bießmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56533EBD.10508@googlemail.com \
--to=andreas.devel@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox