From mboxrd@z Thu Jan 1 00:00:00 1970
From: Przemyslaw Marczak
Date: Thu, 26 Nov 2015 17:18:19 +0100
Subject: [U-Boot] [PATCH] arm: imx6: novena,
gw_ventana: Fix use of pfuze100 bit definitions
In-Reply-To: <1448543330-5975-1-git-send-email-marex@denx.de>
References: <1448543330-5975-1-git-send-email-marex@denx.de>
Message-ID: <565730CB.8060402@samsung.com>
List-Id:
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de
Hello Marek,
On 11/26/2015 02:08 PM, Marek Vasut wrote:
> The following patch changed the PFUZE100 swbst register bit definitions
> and broke PMIC configuration on multiple boards, at least on the novena
> and gw_ventana. This patch fixes it.
>
> commit 8fa46350a4c7dca7710362f6c871098557b934ad
> Author: Peng Fan
> Date: Fri Aug 7 16:43:45 2015 +0800
>
> power: regulator: add pfuze100 support
>
> Signed-off-by: Marek Vasut
> Cc: Fabio Estevam
> Cc: Peng Fan
> Cc: Przemyslaw Marczak
> Cc: Stefano Babic
> Cc: Tim Harvey
> Cc: Vagrant Cascadian
> ---
> board/gateworks/gw_ventana/common.c | 2 +-
> board/kosagi/novena/novena.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
> index d406c83..a20190e 100644
> --- a/board/gateworks/gw_ventana/common.c
> +++ b/board/gateworks/gw_ventana/common.c
> @@ -806,7 +806,7 @@ void setup_pmic(void)
> /* Set SWBST to 5.0V and enable */
> pmic_reg_read(p, PFUZE100_SWBSTCON1, ®);
> reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
> - reg |= (SWBST_5_00V | SWBST_MODE_AUTO);
> + reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT));
> pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);
> }
> }
> diff --git a/board/kosagi/novena/novena.c b/board/kosagi/novena/novena.c
> index babba85..b3159d3 100644
> --- a/board/kosagi/novena/novena.c
> +++ b/board/kosagi/novena/novena.c
> @@ -216,7 +216,7 @@ int power_init_board(void)
> /* Set SWBST to 5.0V and enable (for USB) */
> pmic_reg_read(p, PFUZE100_SWBSTCON1, ®);
> reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
> - reg |= (SWBST_5_00V | SWBST_MODE_AUTO);
> + reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT));
> pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);
>
> return 0;
>
Thanks for fixing :)
Reviewed-by: Przemyslaw Marczak
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com