From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] arm: socfpga: Remove fsloadcmd from environment
Date: Fri, 27 Nov 2015 04:18:01 +0100 [thread overview]
Message-ID: <5657CB69.2020406@denx.de> (raw)
In-Reply-To: <1448591271-2165-1-git-send-email-clsee@altera.com>
On 27.11.2015 03:27, Chin Liang See wrote:
> Remove fsloadcmd / ext2load as we are using load command
> which use the corresponding latest file system command.
>
> Signed-off-by: Chin Liang See <clsee@altera.com>
> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> Cc: Dinh Nguyen <dinh.linux@gmail.com>
> Cc: Pavel Machek <pavel@denx.de>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Stefan Roese <sr@denx.de>
> ---
> include/configs/socfpga_arria5_socdk.h | 1 -
> include/configs/socfpga_cyclone5_socdk.h | 1 -
> include/configs/socfpga_de0_nano_soc.h | 1 -
> include/configs/socfpga_sockit.h | 1 -
> include/configs/socfpga_socrates.h | 1 -
> 5 files changed, 5 deletions(-)
>
> diff --git a/include/configs/socfpga_arria5_socdk.h b/include/configs/socfpga_arria5_socdk.h
> index 0506336..9337a58 100644
> --- a/include/configs/socfpga_arria5_socdk.h
> +++ b/include/configs/socfpga_arria5_socdk.h
> @@ -81,7 +81,6 @@
> "fdt_addr=100\0" \
> "fdtimage=socfpga.dtb\0" \
> "fdtimagesize=0x7000\0" \
> - "fsloadcmd=ext2load\0" \
> "bootm ${loadaddr} - ${fdt_addr}\0" \
> "mmcroot=/dev/mmcblk0p2\0" \
> "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
> diff --git a/include/configs/socfpga_cyclone5_socdk.h b/include/configs/socfpga_cyclone5_socdk.h
> index d7369ee..3b2cfb0 100644
> --- a/include/configs/socfpga_cyclone5_socdk.h
> +++ b/include/configs/socfpga_cyclone5_socdk.h
> @@ -81,7 +81,6 @@
> "fdt_addr=100\0" \
> "fdtimage=socfpga.dtb\0" \
> "fdtimagesize=0x7000\0" \
> - "fsloadcmd=ext2load\0" \
> "bootm ${loadaddr} - ${fdt_addr}\0" \
> "mmcroot=/dev/mmcblk0p2\0" \
> "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
> diff --git a/include/configs/socfpga_de0_nano_soc.h b/include/configs/socfpga_de0_nano_soc.h
> index b371a9b..16e146c 100644
> --- a/include/configs/socfpga_de0_nano_soc.h
> +++ b/include/configs/socfpga_de0_nano_soc.h
> @@ -74,7 +74,6 @@
> "bootimage=zImage\0" \
> "fdt_addr=100\0" \
> "fdtimage=socfpga.dtb\0" \
> - "fsloadcmd=ext2load\0" \
> "bootm ${loadaddr} - ${fdt_addr}\0" \
> "mmcroot=/dev/mmcblk0p2\0" \
> "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
> diff --git a/include/configs/socfpga_sockit.h b/include/configs/socfpga_sockit.h
> index d26f53d..5bcee05 100644
> --- a/include/configs/socfpga_sockit.h
> +++ b/include/configs/socfpga_sockit.h
> @@ -79,7 +79,6 @@
> "bootimage=zImage\0" \
> "fdt_addr=100\0" \
> "fdtimage=socfpga.dtb\0" \
> - "fsloadcmd=ext2load\0" \
> "bootm ${loadaddr} - ${fdt_addr}\0" \
> "mmcroot=/dev/mmcblk0p2\0" \
> "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
> diff --git a/include/configs/socfpga_socrates.h b/include/configs/socfpga_socrates.h
> index 6331251..16a2a86 100644
> --- a/include/configs/socfpga_socrates.h
> +++ b/include/configs/socfpga_socrates.h
> @@ -75,7 +75,6 @@
> "bootimage=zImage\0" \
> "fdt_addr=100\0" \
> "fdtimage=socfpga.dtb\0" \
> - "fsloadcmd=ext2load\0" \
> "bootm ${loadaddr} - ${fdt_addr}\0" \
> "mmcroot=/dev/mmcblk0p2\0" \
> "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
next prev parent reply other threads:[~2015-11-27 3:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-27 2:27 [U-Boot] [PATCH] arm: socfpga: Remove fsloadcmd from environment Chin Liang See
2015-11-27 3:18 ` Stefan Roese [this message]
2015-11-27 10:35 ` Marek Vasut
2015-11-27 12:10 ` Chin Liang See
2015-11-27 12:14 ` Marek Vasut
2015-11-27 12:18 ` Chin Liang See
2015-11-27 12:52 ` Marek Vasut
2015-11-27 13:09 ` Chin Liang See
2015-11-27 13:16 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5657CB69.2020406@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox