From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Fri, 27 Nov 2015 09:24:05 +0100 Subject: [U-Boot] [PATCH] ARM: zynq: Add default ps7_init_gpl.c/h for ZYBO In-Reply-To: <1448357649-18251-1-git-send-email-nathan@nathanrossi.com> References: <1448357649-18251-1-git-send-email-nathan@nathanrossi.com> Message-ID: <56581325.3080105@monstr.eu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 24.11.2015 10:34, Nathan Rossi wrote: > Add ps7_init_gpl.c/h for the ZYBO board. This instance of the ps7_init > is generated by the Vivado 2015.3 tools using the system configuration > provided by Digilent located on their website. > > Update the kconfig so that the defconfig is not overrided to use the > custom init ps7_init_gpl target by default. > > Signed-off-by: Nathan Rossi > Cc: Albert Aribaud > Cc: Michal Simek > Cc: Masahiro Yamada > Cc: Joe Hershberger > Cc: "S?ren Brinkmann" > --- > arch/arm/mach-zynq/Kconfig | 1 - > board/xilinx/zynq/Makefile | 1 + > board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.c | 11948 ++++++++++++++++++++ > board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.h | 97 + > 4 files changed, 12046 insertions(+), 1 deletion(-) > create mode 100644 board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.c > create mode 100644 board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.h Applied. Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: