From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Tue, 1 Dec 2015 11:22:41 +0100 Subject: [U-Boot] [PATCH] dm: core: Enable SPL_SIMPLE_BUS by default In-Reply-To: <565D506D.8090607@denx.de> References: <565D506D.8090607@denx.de> Message-ID: <565D74F1.7030508@xilinx.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 1.12.2015 08:46, Stefan Roese wrote: > Hi Michal, > > On 01.12.2015 08:39, Michal Simek wrote: >> This option is needed for all SoCs which have nodes on bus. Without >> enabling this drivers are not found and probed. >> Issue was found on Zynq MMC probe. >> Enable this option by default. >> >> Signed-off-by: Michal Simek >> --- >> >> drivers/core/Kconfig | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig >> index 15681df6d379..74eee1066092 100644 >> --- a/drivers/core/Kconfig >> +++ b/drivers/core/Kconfig >> @@ -115,7 +115,7 @@ config SIMPLE_BUS >> config SPL_SIMPLE_BUS >> bool "Support simple-bus driver in SPL" >> depends on SPL_DM && SPL_OF_CONTROL >> - default n >> + default y >> help >> Supports the 'simple-bus' driver, which is used on some systems >> in SPL. > > I stumbled over this missing option while porting DM_SPL to mvebu > as well. So: > > Reviewed-by: Stefan Roese yep. btw: I have added you to cc to one more email regarding SPL. Thanks, Michal