From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] arm: socfpga: arria10: add additional i2c nodes for Arria10
Date: Tue, 1 Dec 2015 18:12:32 +0100 [thread overview]
Message-ID: <565DD500.8090706@denx.de> (raw)
In-Reply-To: <1448988115-20700-1-git-send-email-dinguyen@opensource.altera.com>
On 01.12.2015 17:41, dinguyen at opensource.altera.com wrote:
> From: Dinh Nguyen <dinguyen@opensource.altera.com>
>
> Add remaining 3 I2C base addresses for the Arria10.
>
> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
> ---
> arch/arm/mach-socfpga/include/mach/base_addr_a10.h | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
> index a7056d4..8653dd5 100644
> --- a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
> +++ b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
> @@ -29,6 +29,10 @@
> #define SOCFPGA_MPUL2_ADDRESS 0xfffff000
> #define SOCFPGA_I2C0_ADDRESS 0xffc02200
> #define SOCFPGA_I2C1_ADDRESS 0xffc02300
> +#define SOCFPGA_I2C2_ADDRESS 0xffc02400
> +#define SOCFPGA_I2C3_ADDRESS 0xffc02500
> +#define SOCFPGA_I2C4_ADDRESS 0xffc02600
> +
>
> #define SOCFPGA_ECC_OCRAM_ADDRESS 0xff8c3000
> #define SOCFPGA_UART0_ADDRESS 0xffc02000
Nitpicking, but there seems to be one empty line too much
added above.
Other than this:
Reviewed-by: Stefan Roese <sr@denx.de>
BTW: Is anyone working on DM conversion of this I2C driver? All
those macros for the base addresses would not be needed then.
Thanks,
Stefan
next prev parent reply other threads:[~2015-12-01 17:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-01 16:41 [U-Boot] [PATCH] arm: socfpga: arria10: add additional i2c nodes for Arria10 dinguyen at opensource.altera.com
2015-12-01 17:12 ` Stefan Roese [this message]
2015-12-01 18:41 ` Marek Vasut
2015-12-02 5:36 ` Chin Liang See
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=565DD500.8090706@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox