[U-Boot] [PATCH 5/6] drivers: dma: ti-edma3: convert driver to adopt driver model

[Mugunthan V N <mugunthanvnm@ti.com>]

On Wednesday 02 December 2015 03:24 AM, Simon Glass wrote:
> Hi Mugunthan,
> 
> On 1 December 2015 at 04:13, Mugunthan V N <mugunthanvnm@ti.com> wrote:
>> adopt ti-edma3 driver to device driver model
>>
>> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
>> ---
>>  drivers/dma/ti-edma3.c | 75 ++++++++++++++++++++++++++++++++++++++++++++++++--
>>  1 file changed, 73 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/dma/ti-edma3.c b/drivers/dma/ti-edma3.c
>> index d6a427f..0eb8602 100644
>> --- a/drivers/dma/ti-edma3.c
>> +++ b/drivers/dma/ti-edma3.c
>> @@ -11,6 +11,9 @@
>>
>>  #include <asm/io.h>
>>  #include <common.h>
>> +#include <dma.h>
>> +#include <dm/device.h>
>> +#include <asm/omap_common.h>
>>  #include <asm/ti-common/ti-edma3.h>
>>
>>  #define EDMA3_SL_BASE(slot)                    (0x4000 + ((slot) << 5))
>> @@ -31,6 +34,11 @@
>>  #define EDMA3_QEESR                            0x108c
>>  #define EDMA3_QSECR                            0x1094
>>
>> +/* ti qspi priv */
> 
> May as well drop this comment as it doesn't help.
> 
>> +struct ti_edma3_priv {
>> +       u32 base;
>> +};
>> +
>>  /**
>>   * qedma3_start - start qdma on a channel
>>   * @base: base address of edma
>> @@ -383,8 +391,8 @@ void qedma3_stop(u32 base, struct edma3_channel_config *cfg)
>>         __raw_writel(0, base + EDMA3_QCHMAP(cfg->chnum));
>>  }
>>
>> -void edma3_transfer(unsigned long edma3_base_addr, unsigned int
>> -                   edma_slot_num, void *dst, void *src, size_t len)
>> +void __edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num,
>> +                     void *dst, void *src, size_t len)
>>  {
>>         struct edma3_slot_config        slot;
>>         struct edma3_channel_config     edma_channel;
>> @@ -460,3 +468,66 @@ void edma3_transfer(unsigned long edma3_base_addr, unsigned int
>>                 qedma3_stop(edma3_base_addr, &edma_channel);
>>         }
>>  }
>> +
>> +#ifndef CONFIG_DM_DMA
>> +
>> +void edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num,
>> +                   void *dst, void *src, size_t len)
>> +{
>> +       __edma3_transfer(edma3_base_addr, edma_slot_num, dst, src, len);
>> +}
>> +
>> +#else
>> +
>> +static int ti_edma3_transfer(struct udevice *dev, int direction, void *dst,
>> +                            void *src, size_t len)
>> +{
>> +       struct ti_edma3_priv *priv = dev_get_priv(dev);
>> +
>> +       /* enable edma3 clocks */
>> +       enable_edma3_clocks();
>> +
>> +       __edma3_transfer(priv->base, 1, dst, src, len);
> 
> What happens to direction?

Missed to check the direction, will add in next version.

> 
>> +
>> +       /* disable edma3 clocks */
>> +       disable_edma3_clocks();
>> +
>> +       return 0;
>> +}
>> +
>> +static int ti_edma3_probe(struct udevice *bus)
>> +{
>> +       /* Nothing to do in probe */
> 
> You can omit this function.

Okay.

> 
>> +       return 0;
>> +}
>> +
>> +static int ti_edma3_ofdata_to_platdata(struct udevice *dev)
>> +{
>> +       struct ti_edma3_priv *priv = dev_get_priv(dev);
>> +       struct dma_dev_priv *uc_priv = dev_get_uclass_priv(dev);
>> +
>> +       priv->base = dev_get_addr(dev);
>> +       uc_priv->supported = SUPPORTS_MEM_TO_MEM;
>> +
>> +       return 0;
>> +}
>> +
>> +static const struct dma_ops ti_edma3_ops = {
>> +       .transfer       = ti_edma3_transfer,
>> +};
>> +
>> +static const struct udevice_id ti_edma3_ids[] = {
>> +       { .compatible = "ti,edma3" },
>> +       { }
>> +};
>> +
>> +U_BOOT_DRIVER(ti_edma3) = {
>> +       .name   = "ti_edma3",
>> +       .id     = UCLASS_DMA,
>> +       .of_match = ti_edma3_ids,
>> +       .ops    = &ti_edma3_ops,
>> +       .ofdata_to_platdata = ti_edma3_ofdata_to_platdata,
>> +       .priv_auto_alloc_size = sizeof(struct ti_edma3_priv),
>> +       .probe  = ti_edma3_probe,
>> +};
>> +#endif /* CONFIG_DM_DMA */
>> --
>> 2.6.3.368.gf34be46
>>
> 

Regards
Mugunthan V N