[U-Boot] mmc erase fails from U-Boot command line

[Eric Nelson <eric@nelint.com>]

Hi all,

On 12/04/2015 09:08 AM, Eric Nelson wrote:
...
> 
> I think you're onto something.
> 
> According to the i.MX35 reference manual, which I think was the origin
> of this patch, the low four bits of the SYSCTL register of the SDHC5
> 	3	- SDCLKEN
> 	2	- PEREN
> 	1	- HCKEN
> 	0	- IPGEN
> 
> See page 603 of
> http://cache.freescale.com/files/dsp/doc/ref_manual/IMX35RM.pdf
> 
> But in the i.MX6 reference manual, the low four bits are reserved and
> say "Always write as 1".
> 
> See pages 5679-5680 of
> http://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf
> 
> It appears that when this patch was ported from the Freescale version,
> the test for "is_usdhc" was lost.
> 
> http://git.denx.de/?p=u-boot.git;a=commitdiff;h=7a5b80297bc6cef0c10e5f57ac0450678dc7bc5e
> 
> 

Following up, this code is bugged on i.MX6:

	http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/mmc/fsl_esdhc.c;h=c5054d66bdcda029f0485958c87bd5154ccee591;hb=HEAD#l505

As are a couple of other things in the driver, as seen by
trying to compile without the constants for the low 4 bits:

diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index aa1b4cf..a4b87ce 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -25,10 +25,12 @@
 #define SYSCTL_INITA           0x08000000
 #define SYSCTL_TIMEOUT_MASK    0x000f0000
 #define SYSCTL_CLOCK_MASK      0x0000fff0
+#if !defined(CONFIG_MX6)
 #define SYSCTL_CKEN            0x00000008
 #define SYSCTL_PEREN           0x00000004
 #define SYSCTL_HCKEN           0x00000002
 #define SYSCTL_IPGEN           0x00000001
+#endif
 #define SYSCTL_RSTA            0x01000000
 #define SYSCTL_RSTC            0x02000000
 #define SYSCTL_RSTD            0x04000000