[U-Boot] [PATCH] imx_common: check for Serial Downloader in spl_boot_device

[Stefano Babic <sbabic@denx.de>]

On 04/12/2015 14:09, Stefan Roese wrote:
> Hi Stefano,
> 
> On 04.12.2015 12:49, Stefano Babic wrote:
>> On 04/12/2015 11:51, Fabio Estevam wrote:
>>> Hi Stefano,
>>>
>>> On Fri, Dec 4, 2015 at 7:02 AM, Stefano Babic <sbabic@denx.de> wrote:
>>>> Check for bmode before reading the boot device
>>>> to check if a serial downloader is started,
>>>> and returns UART if the serial downloader is set,
>>>> letting SPL to wait for an image if
>>>> CONFIG_SPL_YMODEM_SUPPORT is set.
>>>>
>>>> This allows to load again a SPL based board
>>>> with imx_usb_loader together with a tool
>>>> such as kermit.
>>>
>>> Just curious: what were the commands you usned with imx_usb_loader to
>>> load SPL + u-boot.img?
>>>
>>
>> I did in this way:
>>
>> sudo ../imx_usb_loader/imx_usb -v SPL
>> kermit kermit_uboot
>>
>> And kermit_uboot (a kermit script) contains the lines:
>>
>> set line /dev/ttyUSB1
>> set speed 115200
>> SET CARRIER-WATCH OFF
>> set flow-control none
>> set handshake none
>> set prefixing all
>> set file type bin
>> set protocol ymodem
>> send u-boot.img
>> c
>>
>> The last "c" command tells kermit (from ckermit package in most distro)
>> to switch from command line mode to communication mode, and when the
>> script is finished, I get U-Boot prompt in the same shell. I tested on a
>> custom board booting from SPI (when internal mode is used), and changing
>> BOOT_MODE to serial, SPL starts automatically a download with y-modem.
> 
> Could you please add this description to some imx README in the
> U-Boot source tree? I'm pretty sure this could be helpful to others
> as well.
> 


Sure, it will be done in V2.

Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================