[U-Boot] [PATCH] mx6cuboxi: use load instead of fatload

[Stefano Babic <sbabic@denx.de>]

On 14/11/2015 19:25, Thomas Bechtold wrote:
> From: Thomas Bechtold <tbechtold@suse.com>
> 
> That way the FS can also be ext2/3/4 .
> ---
>  include/configs/mx6cuboxi.h | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
> index 6e89dd1..690e6b0 100644
> --- a/include/configs/mx6cuboxi.h
> +++ b/include/configs/mx6cuboxi.h
> @@ -114,11 +114,11 @@
>  	"mmcargs=setenv bootargs console=${console},${baudrate} " \
>  		"root=${mmcroot}\0" \
>  	"loadbootscript=" \
> -		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
> +		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
>  	"bootscript=echo Running bootscript from mmc ...; " \
>  		"source\0" \
> -	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
> -	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
> +	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
> +	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
>  	"mmcboot=echo Booting from mmc ...; " \
>  		"run mmcargs; " \
>  		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> 

mx6cuboxi switched to distro environment. This is not valid anymore.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================