From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/5] board: atmel: clean up peripheral clock code
Date: Wed, 9 Dec 2015 07:56:25 +0100 [thread overview]
Message-ID: <5667D099.4010209@denx.de> (raw)
In-Reply-To: <1449632726-6614-5-git-send-email-wenyou.yang@atmel.com>
Hello Wenyou,
Am 09.12.2015 um 04:45 schrieb Wenyou Yang:
> Due to introducing the new peripheral clock handle functions,
> use these functions to reduce duplicated code.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> ---
>
> board/atmel/at91rm9200ek/at91rm9200ek.c | 1 -
> board/atmel/at91rm9200ek/led.c | 5 +----
> board/atmel/at91sam9260ek/at91sam9260ek.c | 15 +++++----------
> board/atmel/at91sam9261ek/at91sam9261ek.c | 8 ++------
> board/atmel/at91sam9261ek/led.c | 6 ++----
> board/atmel/at91sam9263ek/at91sam9263ek.c | 23 +++++++----------------
> board/atmel/at91sam9263ek/led.c | 9 +++------
> board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 20 +++++---------------
> board/atmel/at91sam9m10g45ek/led.c | 7 ++-----
> board/atmel/at91sam9n12ek/at91sam9n12ek.c | 6 ++----
> board/atmel/at91sam9rlek/at91sam9rlek.c | 18 ++++++------------
> board/atmel/at91sam9rlek/led.c | 7 ++-----
> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 10 +++-------
> board/atmel/sama5d2_xplained/sama5d2_xplained.c | 1 -
> board/atmel/sama5d3_xplained/sama5d3_xplained.c | 5 ++---
> board/atmel/sama5d3xek/sama5d3xek.c | 5 ++---
> board/atmel/sama5d4_xplained/sama5d4_xplained.c | 5 ++---
> board/atmel/sama5d4ek/sama5d4ek.c | 5 ++---
> board/bluewater/snapper9260/snapper9260.c | 15 +++++----------
> board/calao/usb_a9263/usb_a9263.c | 11 ++++-------
> board/egnite/ethernut5/ethernut5.c | 20 ++++++++------------
> board/esd/meesc/meesc.c | 15 ++++++---------
> board/mini-box/picosam9g45/led.c | 7 ++-----
> board/mini-box/picosam9g45/picosam9g45.c | 17 ++++-------------
> board/ronetix/pm9261/led.c | 7 ++-----
> board/ronetix/pm9261/pm9261.c | 22 ++++++----------------
> board/ronetix/pm9263/led.c | 7 ++-----
> board/ronetix/pm9263/pm9263.c | 19 +++++--------------
> board/ronetix/pm9g45/pm9g45.c | 20 ++++++--------------
> board/siemens/corvus/board.c | 6 ++----
> board/siemens/smartweb/smartweb.c | 3 +--
> board/siemens/taurus/taurus.c | 3 +--
> 32 files changed, 102 insertions(+), 226 deletions(-)
Sorry this patch has checkpatcherrors:
2015-12-09 07:49:38,661: hs at pollux [ 7:49:38] ttbott >
2015-12-09 07:49:39,790: wget http://patchwork.ozlabs.org/patch/554219/mbox
2015-12-09 07:49:39,791: --2015-12-09 07:49:39-- http://patchwork.ozlabs.org/patch/554219/mbox
2015-12-09 07:49:39,791: Resolving patchwork.ozlabs.org (patchwork.ozlabs.org)... 103.22.144.67,
2401:3900:2:1::2
2015-12-09 07:49:40,106: Connecting to patchwork.ozlabs.org
(patchwork.ozlabs.org)|103.22.144.67|:80... connected.
2015-12-09 07:49:40,420: HTTP request sent, awaiting response... 301 MOVED PERMANENTLY
2015-12-09 07:49:40,421: Location: http://patchwork.ozlabs.org/patch/554219/mbox/ [following]
2015-12-09 07:49:40,421: --2015-12-09 07:49:40-- http://patchwork.ozlabs.org/patch/554219/mbox/
2015-12-09 07:49:40,421: Reusing existing connection to patchwork.ozlabs.org:80.
2015-12-09 07:49:40,786: HTTP request sent, awaiting response... 200 OK
2015-12-09 07:49:40,786: Length: unspecified [text/plain]
2015-12-09 07:49:40,786: Saving to: ?mbox?
2015-12-09 07:49:40,786:
2015-12-09 07:49:40,787:
2015-12-09 07:49:41,101: mbox [<=> ] 0 --.-KB/s
2015-12-09 07:49:41,133: mbox [ <=> ] 15.15K 45.0KB/s
2015-12-09 07:49:41,134: mbox [ <=> ] 41.60K 111KB/s in 0.4s
2015-12-09 07:49:41,134:
2015-12-09 07:49:41,134: 2015-12-09 07:49:41 (111 KB/s) - ?mbox? saved [42603]
2015-12-09 07:49:41,134:
2015-12-09 07:49:41,134: hs at pollux [ 7:49:41] ttbott >
2015-12-09 07:49:42,235: if [ $? -ne 0 ]; then echo 'FAILED'; fi
2015-12-09 07:49:42,235: hs at pollux [ 7:49:42] ttbott >
2015-12-09 07:49:43,333: scripts/checkpatch.pl mbox
2015-12-09 07:49:43,698: WARNING: line over 80 characters
2015-12-09 07:49:43,698: #1029: FILE: board/ronetix/pm9261/pm9261.c:167:
2015-12-09 07:49:43,699: + at91_system_clk_enable(AT91_PMC_HCK1); /* LCD controller Clock,
AT91SAM9261 only */
2015-12-09 07:49:43,699:
2015-12-09 07:49:43,699: total: 0 errors, 1 warnings, 0 checks, 1000 lines checked
2015-12-09 07:49:43,699:
2015-12-09 07:49:43,699: NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX
MULTISTATEMENT_MACRO_USE_DO_WHILE NETWORKING_BLOCK_COMMENT_STYLE USLEEP_RANGE
2015-12-09 07:49:43,700:
2015-12-09 07:49:43,700: mbox has style problems, please review.
2015-12-09 07:49:43,700:
2015-12-09 07:49:43,700: If any of these errors are false positives, please report
2015-12-09 07:49:43,700: them to the maintainer, see CHECKPATCH in MAINTAINERS.
2015-12-09 07:49:43,701: hs at pollux [ 7:49:43] ttbott >
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2015-12-09 6:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-09 3:45 [U-Boot] [PATCH 0/5] ARM: at91: improve peripheral and system clock handle functions Wenyou Yang
2015-12-09 3:45 ` [U-Boot] [PATCH 1/5] ARM: at91: asm/at91_pmc.h: fix trival register offset Wenyou Yang
2015-12-09 3:45 ` [U-Boot] [PATCH 2/5] ARM: at91: clock: add a new file to handle clock Wenyou Yang
2015-12-09 3:45 ` [U-Boot] [PATCH 3/5] ARM: cpu: at91: clean up peripheral clock code Wenyou Yang
2015-12-09 3:45 ` [U-Boot] [PATCH 4/5] board: atmel: " Wenyou Yang
2015-12-09 6:56 ` Heiko Schocher [this message]
2015-12-09 7:55 ` Yang, Wenyou
2015-12-09 3:45 ` [U-Boot] [PATCH 5/5] drivers: at91: " Wenyou Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5667D099.4010209@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox