From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] defconfig: taurus_defconfig: disable SPL
Date: Wed, 9 Dec 2015 09:46:18 +0100 [thread overview]
Message-ID: <5667EA5A.6020102@denx.de> (raw)
In-Reply-To: <B256D81BAE5131468A838E5D7A243641D63B8D45@penmbx01>
Hello Wenyou,
Am 09.12.2015 um 09:34 schrieb Yang, Wenyou:
> Hi
>
>> -----Original Message-----
>> From: Heiko Schocher [mailto:hs at denx.de]
>> Sent: 2015?12?9? 16:00
>> To: Yang, Wenyou <Wenyou.Yang@atmel.com>
>> Cc: U-Boot Mailing List <u-boot@lists.denx.de>; andreas.devel at googlemail.com;
>> Meier, Roger <r.meier@siemens.com>
>> Subject: Re: [PATCH] defconfig: taurus_defconfig: disable SPL
>>
>> Hello Wenyou,
>>
>> Am 09.12.2015 um 08:43 schrieb Yang, Wenyou:
>>> Hello Heiko,
>>>
>>>> -----Original Message-----
>>>> From: Heiko Schocher [mailto:hs at denx.de]
>>>> Sent: 2015?12?9? 15:39
>>>> To: Yang, Wenyou <Wenyou.Yang@atmel.com>
>>>> Cc: U-Boot Mailing List <u-boot@lists.denx.de>;
>>>> andreas.devel at googlemail.com; Meier, Roger <r.meier@siemens.com>
>>>> Subject: Re: [PATCH] defconfig: taurus_defconfig: disable SPL
>>>>
>>>> Hello Wenyou,
>>>>
>>>> Am 09.12.2015 um 08:15 schrieb Wenyou Yang:
>>>>> Build SPL with taurus_defconfig defconfig file.
>>>>> It build fails with following log message:
>>>>>
>>>>> ---8< ----
>>>>> $ make mrproper
>>>>> $ make taurus_defconfig
>>>>> $ make SPL
>>>>> [...]
>>>>> LD spl/lib/built-in.o
>>>>> LDS spl/u-boot-spl.lds
>>>>> LD spl/u-boot-spl
>>>>> arm-none-linux-gnueabi-ld: SPL image too big
>>>>> make[1]: *** [spl/u-boot-spl] Error 1
>>>>> make: *** [spl/u-boot-spl] Error 2
>>>>> --->8----
>>>>>
>>>>> This board code is not ready for SPL for now, so disable CONFIG_SPL.
>>>>>
>>>>> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
>>>>> ---
>>>>>
>>>>> configs/taurus_defconfig | 1 -
>>>>> 1 file changed, 1 deletion(-)
>>>>
>>>> NACK.
>>>>
>>>> With which toolchain?
>>>
>>> The toolchain is Sourcery CodeBench Lite 2013.05-24. Here is the
>>> toolchain information,
>>>
>>> ---8<-----
>>> $ arm-none-linux-gnueabi-gcc -v
>>> Using built-in specs.
>>> COLLECT_GCC=arm-none-linux-gnueabi-gcc
>>> COLLECT_LTO_WRAPPER=/home/wyang/opt/arm-
>> 2013.05/bin/../libexec/gcc/arm
>>> -none-linux-gnueabi/4.7.3/lto-wrapper
>>> Target: arm-none-linux-gnueabi
>>> Configured with:
>>> /scratch/jbrown/2013.05-arm-linux-release/src/gcc-4.7-2013.05/configur
>>> e --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu
>>> --target=arm-none-linux-gnueabi --enable-threads --disable-libmudflap
>>> --disable-libssp --disable-libstdcxx-pch
>>> --enable-extra-sgxxlite-multilibs --with-arch=armv5te --with-gnu-as
>>> --with-gnu-ld --with-specs='%{save-temps: -fverbose-asm}
>>> %{funwind-tables|fno-unwind-tables|mabi=*|ffreestanding|nostdlib:;:-fu
>>> nwind-tables} -D__CS_SOURCERYGXX_MAJ__=2013 -
>> D__CS_SOURCERYGXX_MIN__=5
>>> -D__CS_SOURCERYGXX_REV__=24 %{O2:%{!fno-remove-local-statics:
>>> -fremove-local-statics}}
>>> %{O*:%{O|O0|O1|O2|Os:;:%{!fno-remove-local-statics:
>>> -fremove-local-statics}}}' --enable-languages=c,c++ --enable-shared
>>> --enable-lto --enable-symvers=gnu --enable-__cxa_atexit
>>> --with-pkgversion='Sourcery CodeBench Lite 2013.05-24'
>>> --with-bugurl=https://sourcery.mentor.com/GNUToolchain/ --disable-nls
>>> --prefix=/opt/codesourcery
>>> --with-sysroot=/opt/codesourcery/arm-none-linux-gnueabi/libc --w
>> i
>> th-build-sysroot=/scratch/jbrown/2013.05-arm-linux-release/install/arm-none-linux-
>> gnueabi/libc --with-gmp=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-
>> 2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-
>> gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-
>> mpfr=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-
>> linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extras/host-libs-i686-pc-
>> linux-gnu/usr --with-mpc=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-
>> 2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-linux-
>> gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-ppl=/scratch/jbrown/2013.05-
>> arm-linux-release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-
>> arm-none-linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --with-host-
>> libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with-
>> cloog=/scratch/jbrown/2013.05-arm-linux-release/obj/pkg-2013.05-24-arm-none-
>> linux-gnueabi/arm-2013.05-24-arm-none-linux-gnueabi.extr
>> a
>> s/host-libs-i686-pc-linux-gnu/usr --with-libelf=/scratch/jbrown/2013.05-arm-linux-
>> release/obj/pkg-2013.05-24-arm-none-linux-gnueabi/arm-2013.05-24-arm-none-
>> linux-gnueabi.extras/host-libs-i686-pc-linux-gnu/usr --disable-libgomp --disable-
>> libitm --enable-poison-system-directories --with-build-time-
>> tools=/scratch/jbrown/2013.05-arm-linux-release/install/arm-none-linux-
>> gnueabi/bin --with-build-time-tools=/scratch/jbrown/2013.05-arm-linux-
>> release/install/arm-none-linux-gnueabi/bin
>>> Thread model: posix
>>> gcc version 4.7.3 (Sourcery CodeBench Lite 2013.05-24)
>>> --->8---------
>>
>> Just tried with
>>
>> hs at localhost:u-boot [master] $ arm-unknown-linux-gnueabi-gcc -v Using built-in
>> specs.
>> COLLECT_GCC=arm-unknown-linux-gnueabi-gcc
>> COLLECT_LTO_WRAPPER=/home/hs/data/Entwicklung/zug/cacheperformance/c
>> rosstool/tools-linaro-5.2-20151110/arm-unknown-linux-gnueabi/libexec/gcc/arm-
>> unknown-linux-gnueabi/5.2.1/lto-wrapper
>> Target: arm-unknown-linux-gnueabi
>> Configured with:
>> /home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/src/gcc-
>> custom/configure
>> --build=x86_64-build_unknown-linux-gnu --host=x86_64-build_unknown-linux-gnu
>> --target=arm-unknown-linux-gnueabi
>> --prefix=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools-linaro-
>> 5.2-20151110/arm-unknown-linux-gnueabi
>> --with-sysroot=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools-
>> linaro-5.2-20151110/arm-unknown-linux-gnueabi/arm-unknown-linux-
>> gnueabi/sysroot
>> --enable-languages=c --with-pkgversion='crosstool-NG 1.21.0' --enable-
>> __cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --disable-
>> libquadmath --disable-libquadmath-support --disable-libsanitizer --with-
>> gmp=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm-
>> unknown-linux-gnueabi/buildtools
>> --with-
>> mpfr=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm-
>> unknown-linux-gnueabi/buildtools
>> --with-
>> mpc=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm-
>> unknown-linux-gnueabi/buildtools
>> --with-ppl=no --with-isl=no --with-cloog=no --with-
>> libelf=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/.build/arm-
>> unknown-linux-gnueabi/buildtools
>> --enable-threads=posix --enable-target-optspace --disable-nls --disable-multilib --
>> with-local-
>> prefix=/home/hs/data/Entwicklung/zug/cacheperformance/crosstool/tools-linaro-
>> 5.2-20151110/arm-unknown-linux-gnueabi/arm-unknown-linux-gnueabi/sysroot
>> --enable-c99 --enable-long-long
>> Thread model: posix
>> gcc version 5.2.1 20151110 (crosstool-NG 1.21.0) hs at localhost:u-boot [master]
>> $
>>
>> hs at localhost:u-boot [master] $ make taurus_defconfig
>> HOSTCC scripts/basic/fixdep
>> make all HOSTCC scripts/kconfig/conf.o
>>
>> SHIPPED scripts/kconfig/zconf.tab.c
>> SHIPPED scripts/kconfig/zconf.lex.c
>> SHIPPED scripts/kconfig/zconf.hash.c
>> HOSTCC scripts/kconfig/zconf.tab.o
>> HOSTLD scripts/kconfig/conf
>> #
>> # configuration written to .config
>> #
>> hs at localhost:u-boot [master] $ make all scripts/kconfig/conf --silentoldconfig
>> Kconfig [...]
>> LD spl/u-boot-spl
>> OBJCOPY spl/u-boot-spl.bin
>> CFG spl/u-boot-spl.cfg
>> MKIMAGE boot.bin
>> MKIMAGE u-boot.img
>> hs at localhost:u-boot [master] $
>> hs at localhost:u-boot [master] $ ls -al spl/u-boot-spl.bin -rwxrwxr-x. 1 hs hs 15824
>> 9. Dez 08:56 spl/u-boot-spl.bin hs at localhost:u-boot [master] $
>>
>> Use another toolchain? How big is your spl/u-boot-spl.bin ?
>
> I will try another toolchain.
> The size of spl/u-boot-spl.bin is 16048 generated by my current toolchain.
>
> ---8<-----
> $ ls -l spl/u-boot-spl.bin
> -rwxrwxr-x 1 wyang wyang 16048 Dec 9 16:16 spl/u-boot-spl.bin
> --->8----
>
> Maybe the "CONFIG_SPL_MAX_SIZE" should be changed to bigger one, not above 16K. It will be OK.
There are only 16K sram for SPL ... we need some bytes also
for the stack ...
bye,
Heiko
>
>>
>> bye,
>> Heiko
>>>
>>>>
>>>> Here current build of u-boot on travis-ci.org:
>>>> with eldk-5.4:
>>>> https://travis-ci.org/u-boot/u-boot/jobs/95590341
>>>> https://travis-ci.org/u-boot/u-boot/jobs/95590311
>>>>
>>>> bye,
>>>> Heiko
>>>>>
>>>>> diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig
>>>>> index
>>>>> d59912c..557b066 100644
>>>>> --- a/configs/taurus_defconfig
>>>>> +++ b/configs/taurus_defconfig
>>>>> @@ -1,7 +1,6 @@
>>>>> CONFIG_ARM=y
>>>>> CONFIG_ARCH_AT91=y
>>>>> CONFIG_TARGET_TAURUS=y
>>>>> -CONFIG_SPL=y
>>>>>
>>>>
>> CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_
>>>> TAURUS"
>>>>> CONFIG_SYS_PROMPT="U-Boot> "
>>>>> # CONFIG_CMD_BDI is not set
>>>>>
>>>>
>>>> --
>>>> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
>>>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>>>
>>> Best Regards,
>>> Wenyou Yang
>>>
>>
>> --
>> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>
>
> Best Regards,
> Wenyou Yang
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2015-12-09 8:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-09 7:15 [U-Boot] [PATCH] defconfig: taurus_defconfig: disable SPL Wenyou Yang
2015-12-09 7:38 ` Heiko Schocher
2015-12-09 7:43 ` Yang, Wenyou
2015-12-09 8:00 ` Heiko Schocher
2015-12-09 8:34 ` Yang, Wenyou
2015-12-09 8:46 ` Heiko Schocher [this message]
2015-12-09 9:06 ` Yang, Wenyou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5667EA5A.6020102@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox