[U-Boot] [PATCH 1/2] sunxi: twi: enable clocks on sun7i

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 12/03/2015 05:49 PM, Olliver Schinagl wrote:
> From: Olliver Schinagl <o.schinagl@ultimaker.com>
>
> Commit 6c739c5d added code to enable i2c bus 4 and 5 on the sun7i SoC
> but forgot to enable the clocks for these 2 i2c busses.
>
> This patch enables the clocks for i2c bus 4 and 5 on sun7i.
>
> Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com>
> ---
>   arch/arm/cpu/armv7/sunxi/clock_sun4i.c | 4 ++++
>   1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
> index 7c8eff9..ed910b1 100644
> --- a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
> +++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
> @@ -67,7 +67,11 @@ int clock_twi_onoff(int port, int state)
>   	struct sunxi_ccm_reg *const ccm =
>   		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
>
> +#ifdef CONFIG_MACH_SUN7I
> +	if (port > 4)
> +#else
>   	if (port > 2)
> +#endif
>   		return -1;
>
>   	/* set the apb clock gate for twi */

The range-check is not needed at all, since clock_twi_onoff only gets
called with such high indexes when CONFIG_I2C3_ENABLE / CONFIG_I2C4_ENABLE
is set and Kconfig already only allows these on sun6i / sun7i.

So I've applied a modified version of your patch which simply removes the
range-check all-together.

Regards,

Hans