[U-Boot] [RFC PATCH 00/11] Add support for 96boards Dragonboard410C board

[Mateusz Kulikowski <mateusz.kulikowski@gmail.com>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

On 15.12.2015 19:57, sk.syed2 wrote:
>>
>> With a slight delay (Sorry Syed) I'm finally ready to show code
>> I've been working recently on.
> 
> Thanks for the patches. I will update my git tree for snapdragon_810
> with these changes. I only have serial and cache support working on 810
> and it boots to u-boot prompt. The
> arch/arm/cpu/armv8/cache_v8.c/mmu_setup() causes the board to reset. I
> didn't dig deeper. I switched to use
> mmu_setup() as implemented in arch/arm/cpu/armv8/zynqmp/cpu.c and
> everything works fine.

Try to make it able to boot Linux somehow (either via mmc or usb or somehow).

After I'm done with this series for 410C I can take a look at drivers / dts for 
810 and try to give you some hints.

> 
>> create mode 100644 arch/arm/mach-snapdragon/reset.c
> Can you rename this  arch/arm/mach-snapdragon/reset-apq8016.c as I
> have arch/arm/mach-snapdragon/reset-apq8094.c to be added.

Sure - will do that.

> 
> Will provide more feedback going forward.

Great
> 
> Thanks
> -syed
> 

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iQEcBAEBCAAGBQJWcIVEAAoJELvtohmVtQzB1YIH/i5cO7hcGlDW38FwuKnLe5RH
uq2FgoX4OCHMNMZ86o5qEf61UZqCbeMi6jCzvsSH/9KS62Uwlacnl7yMhec/QQ00
644TyyhchyelVmXfbjTouydCObirIJu2SMwn4bn7ThEnBq+CiIKI5dWFAFALhDVD
wHs9HGBK6F2ypP7adjgTcV5pspKV0vghPIdyQSf+ees5q/dbM3oxnBkTGyj3DvAE
sc/2Ip0yu0whUgX4ra+ZVi7zssOQkbSBJfCTcqXVlDOI7Ct87VKkTCWXT8aS9wLK
KRgP2IEkfDCdqOjC5lrhmqG3BnaabeV6U0dWKAcU/ZdudxCnUrNUy3UsmNJzB6o=
=SxKo
-----END PGP SIGNATURE-----