From: Purna Chandra Mandal <purna.mandal@microchip.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 16/18] drivers: mmc: PIC32MZ[DA] SDHCI errata fix when JTAG is not connected.
Date: Thu, 17 Dec 2015 23:04:23 +0530 [thread overview]
Message-ID: <5672F21F.9040808@microchip.com> (raw)
From: Sandeep Sheriker Mallikarjun <sandeep.sheriker@microchip.com>
In PIC32MZ[DA] SoC JTAG and Card_Detect signal are muxed. These created one h/w bug;
SDHCI will not detect micro-SD card if JTAG is not connected. To fix this errata,
- set Card_Detect_Signal_Selection bit in SDHC HostControl register and
- clear CardDetectTestLevel bit in SDHC HostControl register.
Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
---
drivers/mmc/sdhci.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 02d71b9..f32fe67 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -424,6 +424,18 @@ static void sdhci_set_ios(struct mmc *mmc)
if (host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)
ctrl &= ~SDHCI_CTRL_HISPD;
+#if defined(CONFIG_PIC32_SDHCI)
+ /*
+ * In PIC32MZ[DA] due to h/w bug SDHCI fails detecting card when JTAG
+ * is not connected.
+ * To work-around this problem:
+ * - set Card_Detect_Signal_Selection bit in SDHCI_Host_Control register
+ * - clear Card_Detect_Test_Level bit in SDHCI_Host_Control register
+ */
+ ctrl |= SDHCI_CTRL_CD_TEST;
+ ctrl &= ~SDHCI_CTRL_CD_TEST_INS;
+#endif
+
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
}
--
1.8.3.1
reply other threads:[~2015-12-17 17:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5672F21F.9040808@microchip.com \
--to=purna.mandal@microchip.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox