[U-Boot] [PATCH v5 4/5] mips: ath79: add spi driver

[Thomas Chou <thomas@wytron.com.tw>]

Hi Wills,

On 2015?12?29? 19:17, Wills Wang wrote:
> diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
> index 1d92a5b..b5668e9 100644
> --- a/arch/mips/mach-ath79/Kconfig
> +++ b/arch/mips/mach-ath79/Kconfig
> @@ -15,6 +15,7 @@ config SOC_AR933X
>   	select SYS_MIPS_CACHE_INIT_RAM_LOAD
>   	select MIPS_TUNE_24KC
>   	select AR933X_UART
> +	select ATH79_SPI

Both AR933X_UART and ATH79_SPI should not be selected with mach Kconfig. 
They should go with board defconfig.

> diff --git a/drivers/spi/ath79_spi.c b/drivers/spi/ath79_spi.c

> +static inline void ath79_spi_delay(int max_hz)
> +{
> +	uint64_t tick = get_tbclk();
> +
> +	do_div(tick, max_hz);
> +	tick = get_ticks() + tick + 1;	/* get current timestamp */
> +	while (get_ticks() < tick)	/* loop till event */
> +		 /*NOP*/;
> +}

Use udelay() instead.

Best regards,
Thomas