[U-Boot] [PULL] Please pull u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Tom,

my first PR of the year ! Please pull from u-boot-imx, thanks !

The following changes since commit 1d149eddcc0661b683002f76a8240491eba00dbb:

  dm: Add timeline and guide for porting serial drivers (2015-11-20
13:59:54 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to ccf4326bac0371774265be0a8b13c150b445e703:

  imx: mx6qsabreauto: support lvds display (2016-01-03 16:03:14 +0100)

----------------------------------------------------------------
Eric Nelson (1):
      ARM: imx: fsl_esdhc: fix usage of low 4 bits of sysctl register

Fabio Estevam (1):
      mx6sxsabresd: Fix Ethernet PHY reset sequence

Gong Qianyu (1):
      i2c: mxc: add a condition in case the parameter is NULL

Jeroen Hofstee (1):
      imx: mx6: add missing return value

Marek Vasut (3):
      arm: mx6: Reduce SPL malloc pool size
      arm: imx6: novena, gw_ventana: Fix use of pfuze100 bit definitions
      arm: imx6: novena: Enable extfs support in SPL

Maximilian Schwerin (1):
      serial_mxc: Fix setup of UARTx_UFCR register

Michael Heimpold (2):
      ARM: mxs: fix VDDD brownout setting
      ARM: mxs: allow boards to select DC-DC switching clock source

Michael Schanz (1):
      cgtqmx6eval: fix pad configuration for SPI bus

M?ns Rullg?rd (2):
      net: fec_mxc: configure MDIO hold time
      net: fec_mxc: unregister mdio bus on probe error

Otavio Salvador (7):
      cgtqmx6eval: Add SPI NOR flash support
      cgtqmx6eval: Use SPI NOR to store the environment
      cgtqmx6eval: Add fastboot support
      cgtqmx6eval: Add SPL support
      iomux-v3: Take MX6D in consideration for imx_iomux_v3_setup_pad()
      cgtqmx6eval: Add DFU support
      cgtqmx6eval: Fix defconfig name

Peng Fan (5):
      video: ipu: simplify if else code
      imx: mx7: enable CONFIG_FSL_CLK
      imx: mx6: fix reg base address when runtime usage
      imx: ddr: drop duplicated debug info
      imx: mx6qsabreauto: support lvds display

Sanchayan Maity (1):
      colibri_vf: Add board_usb_phy_mode function

Stefano Babic (1):
      imx_common: check for Serial Downloader in spl_boot_device

Vagrant Cascadian (1):
      arm: novena: Switch novena to config_distro_bootcmd

Ye.Li (1):
      mx6: clock: Modify GPMI clock to support mx6sx

 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c               |  38 ++++++++++-
 arch/arm/cpu/armv7/mx6/Kconfig                            |   3 +
 arch/arm/cpu/armv7/mx6/clock.c                            |  14 ++++
 arch/arm/cpu/armv7/mx6/ddr.c                              |   1 -
 arch/arm/imx-common/spl.c                                 |   8 +++
 arch/arm/include/asm/arch-mx6/imx-regs.h                  |   8 +--
 arch/arm/include/asm/arch-mxs/sys_proto.h                 |   2 +
 arch/arm/include/asm/imx-common/iomux-v3.h                |   2 +-
 board/congatec/cgtqmx6eval/MAINTAINERS                    |   2 +-
 board/congatec/cgtqmx6eval/README                         |  78
++++++++++++++++------
 board/congatec/cgtqmx6eval/cgtqmx6eval.c                  | 599
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------
 board/congatec/cgtqmx6eval/imximage.cfg                   | 143
-----------------------------------------
 board/freescale/mx6qsabreauto/mx6qsabreauto.c             |  87
++++++++++++++++++++++++-
 board/freescale/mx6sxsabresd/mx6sxsabresd.c               |  10 ++-
 board/gateworks/gw_ventana/common.c                       |   2 +-
 board/kosagi/novena/novena.c                              |   2 +-
 board/toradex/colibri_vf/colibri_vf.c                     |  33 +++++++++-
 configs/{cgtqmx6qeval_defconfig => cgtqmx6eval_defconfig} |   5 +-
 doc/README.imx6                                           |  51
+++++++++++++++
 drivers/i2c/mxc_i2c.c                                     |  12 +++-
 drivers/mmc/fsl_esdhc.c                                   |  15 ++++-
 drivers/net/fec_mxc.c                                     |  20 +++++-
 drivers/serial/serial_mxc.c                               |   9 ++-
 drivers/video/ipu_disp.c                                  |   4 +-
 include/configs/cgtqmx6eval.h                             |  68
++++++++++++++++++--
 include/configs/imx6_spl.h                                |   6 +-
 include/configs/mx7_common.h                              |   2 +
 include/configs/novena.h                                  |  24 ++++++-
 include/fsl_esdhc.h                                       |   2 +
 29 files changed, 956 insertions(+), 294 deletions(-)
 delete mode 100644 board/congatec/cgtqmx6eval/imximage.cfg
 rename configs/{cgtqmx6qeval_defconfig => cgtqmx6eval_defconfig} (72%)


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================