From mboxrd@z Thu Jan 1 00:00:00 1970 From: Purna Chandra Mandal Date: Wed, 6 Jan 2016 15:47:09 +0530 Subject: [U-Boot] [PATCH v2 10/13] drivers: gpio: add driver for Microchip PIC32 GPIO controller. In-Reply-To: References: <1451916117.27601.129.camel@microchip.com> Message-ID: <568CE9A5.7090507@microchip.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 01/06/2016 02:13 AM, Daniel Schwierzeck wrote: > 2016-01-04 15:01 GMT+01:00 Purna Chandra Mandal : >> PIC32 has ten independently programmable ports and each with multiple pins. >> These pins can be configured and used as GPIO, if not use by any other >> peripherals. >> >> Signed-off-by: Purna Chandra Mandal >> --- >> >> Changes in v2: None >> >> drivers/gpio/Kconfig | 7 ++ >> drivers/gpio/Makefile | 2 +- >> drivers/gpio/pic32_gpio.c | 164 ++++++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 172 insertions(+), 1 deletion(-) >> create mode 100644 drivers/gpio/pic32_gpio.c >> >> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig >> index e60e9fd..13e9a6a 100644 >> --- a/drivers/gpio/Kconfig >> +++ b/drivers/gpio/Kconfig >> @@ -83,4 +83,11 @@ config VYBRID_GPIO >> help >> Say yes here to support Vybrid vf610 GPIOs. >> >> +config PIC32_GPIO >> + bool "Microchip PIC32 GPIO driver" >> + depends on DM_GPIO >> + default y if MACH_PIC32 >> + help >> + Say yes here to support Microchip PIC32 GPIOs. >> + >> endmenu >> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile >> index fb4fd25..845a6d4 100644 >> --- a/drivers/gpio/Makefile >> +++ b/drivers/gpio/Makefile >> @@ -46,4 +46,4 @@ obj-$(CONFIG_STM32_GPIO) += stm32_gpio.o >> obj-$(CONFIG_ZYNQ_GPIO) += zynq_gpio.o >> obj-$(CONFIG_VYBRID_GPIO) += vybrid_gpio.o >> obj-$(CONFIG_HIKEY_GPIO) += hi6220_gpio.o >> - >> +obj-$(CONFIG_PIC32_GPIO) += pic32_gpio.o >> diff --git a/drivers/gpio/pic32_gpio.c b/drivers/gpio/pic32_gpio.c >> new file mode 100644 >> index 0000000..69e3620 >> --- /dev/null >> +++ b/drivers/gpio/pic32_gpio.c >> @@ -0,0 +1,164 @@ >> +/* >> + * Copyright (c) 2015 Microchip Technology Inc >> + * Purna Chandra Mandal >> + * >> + * SPDX-License-Identifier: GPL-2.0+ >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> + >> +/* Peripheral Pin Control */ >> +struct pic32_gpio_regs { >> + struct pic32_reg_atomic ansel; >> + struct pic32_reg_atomic tris; >> + struct pic32_reg_atomic port; >> + struct pic32_reg_atomic lat; >> + struct pic32_reg_atomic open_drain; >> + struct pic32_reg_atomic cnpu; >> + struct pic32_reg_atomic cnpd; >> + struct pic32_reg_atomic cncon; >> +}; >> + >> +enum { >> + MICROCHIP_GPIO_DIR_OUT, >> + MICROCHIP_GPIO_DIR_IN, >> + MICROCHIP_GPIOS_PER_BANK = 16, >> +}; >> + >> +struct pic32_gpio_priv { >> + struct pic32_gpio_regs *regs; >> + char name[2]; >> +}; >> + >> +static int pic32_gpio_get_value(struct udevice *dev, unsigned offset) >> +{ >> + struct pic32_gpio_priv *priv = dev_get_priv(dev); >> + >> + return !!(readl(&priv->regs->port.raw) & BIT(offset)); >> +} >> + >> +static int pic32_gpio_set_value(struct udevice *dev, unsigned offset, >> + int value) >> +{ >> + struct pic32_gpio_priv *priv = dev_get_priv(dev); >> + int mask = BIT(offset); >> + >> + if (value) >> + writel(mask, &priv->regs->port.set); >> + else >> + writel(mask, &priv->regs->port.clr); >> + >> + return 0; >> +} >> + >> +static int pic32_gpio_direction(struct udevice *dev, unsigned offset) >> +{ >> + struct pic32_gpio_priv *priv = dev_get_priv(dev); >> + >> + if (readl(&priv->regs->ansel.raw) & BIT(offset)) >> + return -1; >> + >> + if (readl(&priv->regs->tris.raw) & BIT(offset)) >> + return MICROCHIP_GPIO_DIR_IN; >> + else >> + return MICROCHIP_GPIO_DIR_OUT; >> +} >> + >> +static int pic32_gpio_direction_input(struct udevice *dev, unsigned offset) >> +{ >> + struct pic32_gpio_priv *priv = dev_get_priv(dev); >> + int mask = BIT(offset); >> + >> + writel(mask, &priv->regs->ansel.clr); >> + writel(mask, &priv->regs->tris.set); >> + >> + return 0; >> +} >> + >> +static int pic32_gpio_direction_output(struct udevice *dev, >> + unsigned offset, int value) >> +{ >> + struct pic32_gpio_priv *priv = dev_get_priv(dev); >> + int mask = BIT(offset); >> + >> + writel(mask, &priv->regs->ansel.clr); >> + writel(mask, &priv->regs->tris.clr); >> + >> + pic32_gpio_set_value(dev, offset, value); >> + return 0; >> +} >> + >> +static int pic32_gpio_xlate(struct udevice *dev, struct gpio_desc *desc, >> + struct fdtdec_phandle_args *args) >> +{ >> + desc->offset = args->args[0]; >> + desc->flags = args->args[1] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0; >> + >> + return 0; >> +} >> + >> +static int pic32_gpio_probe(struct udevice *dev) >> +{ >> + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); >> + struct pic32_gpio_priv *priv = dev_get_priv(dev); >> + char *end; >> + int bank; >> + >> + priv->regs = pic32_ioremap(dev_get_addr(dev)); > split this code and check the return value of dev_get_addr for > FDT_ADDR_T_NONE like you did in your other drivers. Ack, Will add sanity check. >> + uc_priv->gpio_count = MICROCHIP_GPIOS_PER_BANK; >> + end = strrchr(dev->name, '@'); >> + bank = trailing_strtoln(dev->name, end); >> + priv->name[0] = 'A' + bank; >> + uc_priv->bank_name = priv->name; >> + >> + return 0; >> +} >> + >> +static int pic32_gpio_get_function(struct udevice *dev, unsigned offset) >> +{ >> + int ret = GPIOF_UNUSED; >> + >> + switch (pic32_gpio_direction(dev, offset)) { >> + case MICROCHIP_GPIO_DIR_OUT: >> + ret = GPIOF_OUTPUT; >> + break; >> + case MICROCHIP_GPIO_DIR_IN: >> + ret = GPIOF_INPUT; >> + break; >> + default: >> + ret = GPIOF_UNUSED; >> + break; >> + } >> + return ret; >> +} >> + >> +static const struct dm_gpio_ops gpio_pic32_ops = { >> + .direction_input = pic32_gpio_direction_input, >> + .direction_output = pic32_gpio_direction_output, >> + .get_value = pic32_gpio_get_value, >> + .set_value = pic32_gpio_set_value, >> + .get_function = pic32_gpio_get_function, >> + .xlate = pic32_gpio_xlate, >> +}; >> + >> +static const struct udevice_id pic32_gpio_ids[] = { >> + { .compatible = "microchip,pic32mzda-gpio" }, >> + { } >> +}; >> + >> +U_BOOT_DRIVER(gpio_pic32) = { >> + .name = "gpio_pic32", >> + .id = UCLASS_GPIO, >> + .of_match = pic32_gpio_ids, >> + .ops = &gpio_pic32_ops, >> + .probe = pic32_gpio_probe, >> + .priv_auto_alloc_size = sizeof(struct pic32_gpio_priv), >> +}; >> -- >> 1.8.3.1 >> >> > >