[U-Boot] [PATCH v2 1/3] phy: atheros: Use ar8035_config for AR8031

[Stefano Babic <sbabic@denx.de>]

On 05/01/2016 20:02, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
> 
> Commit 08ad9b068afb88 (" ar8031: modify the config func of ar8031 to
> ar8021_config") selected 'ar8021_config' as the configuration function
> for AR8031.
> 
> The correct would be to use 'ar8035_config' instead as AR8031/AR8035
> have the same programming model and even share the same phy driver
> in the linux kernel: drivers/net/phy/at803x.c.
> 
> Tested on a mx6qsabresd and wandboard, which now can work without
> any PHY setup code in the board files.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
> This is 2016.04 material.
> 
> Zhao Qiang, could you please test this on your platform?
> 
> Changes since v1:
> - None
> 
>  drivers/net/phy/atheros.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c
> index d509e30..ba57b1a 100644
> --- a/drivers/net/phy/atheros.c
> +++ b/drivers/net/phy/atheros.c
> @@ -51,7 +51,7 @@ static struct phy_driver AR8031_driver =  {
>  	.uid = 0x4dd074,
>  	.mask = 0xffffffef,
>  	.features = PHY_GBIT_FEATURES,
> -	.config = ar8021_config,
> +	.config = ar8035_config,
>  	.startup = genphy_startup,
>  	.shutdown = genphy_shutdown,
>  };
> 

Applied (fix) to u-boot-imx, thanks !

Best regards,
Stefano Babic



-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================