[U-Boot] [PATCH v2 3/3] wandboard: Simplify the Ethernet PHY configuration

[Stefano Babic <sbabic@denx.de>]

On 05/01/2016 20:02, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
> 
> As per the AR8031 datasheet:
> 
> "For a reliable power on reset, suggest to keep asserting the reset
> low long enough (10ms) to ensure the clock is stable and clock-to-reset
> 1ms requirement is satisfied."
> 
> So do as suggested and also add a 100us delay after deasserting the
> reset line to guarantee that the PHY ID can be read correctly and the
> Atheros 8031 PHY driver can be loaded automatically.
> 
> This results in a simpler code.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---


Applied (fix) to u-boot-imx, thanks !

Best regards,
Stefano Babic



-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================