From: Purna Chandra Mandal <purna.mandal@microchip.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 09/14] board: Add Microchip PIC32MZ[DA]-Starter-Kit board.
Date: Thu, 14 Jan 2016 12:10:15 +0530 [thread overview]
Message-ID: <569742CF.1020909@microchip.com> (raw)
In-Reply-To: <20160113145610.GI3359@bill-the-cat>
On 01/13/2016 08:26 PM, Tom Rini wrote:
> On Tue, Jan 12, 2016 at 03:48:24PM +0530, Purna Chandra Mandal wrote:
>
>> This adds support for Microchip PIC32MZ[DA] StarterKit board
>> based on a PIC32MZ[DA] family of microcontroller.
>>
>> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
> [snip]
>> diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig
>> new file mode 100644
>> index 0000000..3483eb0
>> --- /dev/null
>> +++ b/configs/pic32mzdask_defconfig
>> @@ -0,0 +1,416 @@
>> +#
>> +# Automatically generated file; DO NOT EDIT.
>> +# U-Boot 2016.01-rc3 Configuration
> Please use 'make savedefconfig' to generate this file instead, it will
> be much smaller (and this is also what you do with the linux kernel).
ack. Will do.
>> +++ b/include/configs/pic32mzdask.h
> [snip]
>> +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
> I think you can use the default here.
ack. Will drop this to use fallback one.
next prev parent reply other threads:[~2016-01-14 6:40 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-12 10:18 [U-Boot] [PATCH v3 00/14] Initial Microchip PIC32MZ[DA] Support Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 01/14] MIPS: initialize board_init_f() argument to zero Purna Chandra Mandal
2016-01-12 12:29 ` Daniel Schwierzeck
2016-01-14 5:29 ` Purna Chandra Mandal
2016-01-21 14:06 ` Daniel Schwierzeck
2016-01-12 10:18 ` [U-Boot] [PATCH v3 02/14] MIPS: initial infrastructure for Microchip PIC32 architecture Purna Chandra Mandal
2016-01-12 12:55 ` Daniel Schwierzeck
2016-01-13 14:56 ` Tom Rini
2016-01-12 10:18 ` [U-Boot] [PATCH v3 03/14] drivers: clk: Add clock driver for Microchip PIC32 Microcontroller Purna Chandra Mandal
2016-01-13 13:38 ` Daniel Schwierzeck
2016-01-14 5:34 ` Purna Chandra Mandal
2016-01-13 14:55 ` Tom Rini
2016-01-14 6:04 ` Purna Chandra Mandal
2016-01-14 12:30 ` Tom Rini
2016-01-12 10:18 ` [U-Boot] [PATCH v3 04/14] drivers: pinctrl: Add pinctrl driver for Microchip PIC32 Purna Chandra Mandal
2016-01-13 13:42 ` Daniel Schwierzeck
2016-01-13 14:55 ` Tom Rini
2016-01-13 20:10 ` Simon Glass
2016-01-12 10:18 ` [U-Boot] [PATCH v3 05/14] drivers: gpio: add driver for Microchip PIC32 GPIO controller Purna Chandra Mandal
2016-01-13 13:46 ` Daniel Schwierzeck
2016-01-13 14:08 ` Daniel Schwierzeck
2016-01-14 5:41 ` Purna Chandra Mandal
2016-01-13 14:55 ` Tom Rini
2016-01-13 20:10 ` Simon Glass
2016-01-14 10:15 ` Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 06/14] drivers: serial: add driver for Microchip PIC32 UART controller Purna Chandra Mandal
2016-01-13 13:49 ` Daniel Schwierzeck
2016-01-13 14:03 ` Daniel Schwierzeck
2016-01-14 5:42 ` Purna Chandra Mandal
2016-01-13 14:55 ` Tom Rini
2016-01-13 20:09 ` Simon Glass
2016-01-14 6:14 ` Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 07/14] drivers: ddr: Add DDR2 SDRAM controller driver for Microchip PIC32 Purna Chandra Mandal
2016-01-13 13:53 ` Daniel Schwierzeck
2016-01-13 14:55 ` Tom Rini
2016-01-13 20:09 ` Simon Glass
2016-01-12 10:18 ` [U-Boot] [PATCH v3 08/14] MIPS: Add support for Microchip PIC32MZ[DA] SoC family Purna Chandra Mandal
2016-01-13 14:49 ` Daniel Schwierzeck
2016-01-14 5:54 ` Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 09/14] board: Add Microchip PIC32MZ[DA]-Starter-Kit board Purna Chandra Mandal
2016-01-13 14:56 ` Tom Rini
2016-01-14 6:40 ` Purna Chandra Mandal [this message]
2016-01-13 15:03 ` Daniel Schwierzeck
2016-01-14 8:40 ` Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 10/14] drivers: mmc: add driver for Microchip PIC32 SDHCI controller Purna Chandra Mandal
2016-01-13 14:56 ` Tom Rini
2016-01-13 15:15 ` Daniel Schwierzeck
2016-01-14 9:18 ` Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 11/14] board: add SDHCI support for PIC32MZDASK board Purna Chandra Mandal
2016-01-13 14:56 ` Tom Rini
2016-01-14 8:31 ` Purna Chandra Mandal
2016-01-12 10:18 ` [U-Boot] [PATCH v3 12/14] drivers: net: phy: add SMSC LAN8740 Phy support Purna Chandra Mandal
2016-01-13 14:56 ` Tom Rini
2016-01-13 15:19 ` Daniel Schwierzeck
2016-01-12 10:18 ` [U-Boot] [PATCH v3 13/14] drivers: net: Add ethernet driver for Microchip PIC32 Purna Chandra Mandal
2016-01-13 14:56 ` Tom Rini
2016-01-14 10:29 ` Purna Chandra Mandal
2016-01-13 15:37 ` Daniel Schwierzeck
2016-01-14 10:05 ` Purna Chandra Mandal
2016-01-14 14:01 ` Daniel Schwierzeck
2016-01-12 10:18 ` [U-Boot] [PATCH v3 14/14] board: Enable ethernet, tftpboot support to pic32mzdask board Purna Chandra Mandal
2016-01-13 14:56 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=569742CF.1020909@microchip.com \
--to=purna.mandal@microchip.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox