[U-Boot] [PATCH v3 10/14] drivers: mmc: add driver for Microchip PIC32 SDHCI controller.

[Purna Chandra Mandal <purna.mandal@microchip.com>]

On 01/13/2016 08:45 PM, Daniel Schwierzeck wrote:
> Am Dienstag, den 12.01.2016, 15:48 +0530 schrieb Purna Chandra Mandal:
>> From: Andrei Pistirica <andrei.pistirica@microchip.com>
>>
>> This driver implements platform specific glue and fixups for
>> PIC32 internal SDHCI controller.
>>
>> Signed-off-by: Andrei Pistirica <andrei.pistirica@microchip.com>
>> Signed-off-by: Sandeep Sheriker Mallikarjun <
>> sandeepsheriker.mallikarjun at microchip.com>
>> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
>>
> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
>
> nits below
>
>> ---
>>
>> Changes in v3:
>> - remove ofdata_to_platdata, and replace platdata with priv
>> - replace pic32_ioremap() with ioremap()
>>
>> Changes in v2:
>> - drop sdhci shared bus configuration (for shared interrupt, clock
>> pins)
>>
>>  drivers/mmc/Kconfig       |  6 +++++
>>  drivers/mmc/Makefile      |  2 +-
>>  drivers/mmc/pic32_sdhci.c | 61
>> +++++++++++++++++++++++++++++++++++++++++++++++
>>  drivers/mmc/sdhci.c       | 12 ++++++++++
>>  4 files changed, 80 insertions(+), 1 deletion(-)
>>  create mode 100644 drivers/mmc/pic32_sdhci.c
>>
>> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
>> index ceae7bc..0b6f54b 100644
>> --- a/drivers/mmc/Kconfig
>> +++ b/drivers/mmc/Kconfig
>> @@ -31,4 +31,10 @@ config SH_SDHI
>>  	help
>>  	  Support for the on-chip SDHI host controller on
>> SuperH/Renesas ARM SoCs platform
>>  
>> +config PIC32_SDHCI
>> +	bool "Microchip PIC32 on-chip SDHCI support"
>> +	depends on DM_MMC && MACH_PIC32
>> +	help
>> +	  Support for the on-chip SDHCI support on Microchip PIC32
>> platforms.
>> +
>>  endmenu
>> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
>> index 5d35705..c9c3e3e 100644
>> --- a/drivers/mmc/Makefile
>> +++ b/drivers/mmc/Makefile
>> @@ -48,4 +48,4 @@ obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
>>  else
>>  obj-$(CONFIG_GENERIC_MMC) += mmc_write.o
>>  endif
>> -
>> +obj-$(CONFIG_PIC32_SDHCI) += pic32_sdhci.o
>> diff --git a/drivers/mmc/pic32_sdhci.c b/drivers/mmc/pic32_sdhci.c
>> new file mode 100644
>> index 0000000..f8a5a23
>> --- /dev/null
>> +++ b/drivers/mmc/pic32_sdhci.c
>> @@ -0,0 +1,61 @@
>> +/*
>> + * Support of SDHCI for Microchip PIC32 SoC.
>> + *
>> + * Copyright (C) 2015 Microchip Technology Inc.
>> + * Andrei Pistirica <andrei.pistirica@microchip.com>
>> + *
>> + * SPDX-License-Identifier:	GPL-2.0+
>> + */
>> +
>> +#include <dm.h>
>> +#include <common.h>
>> +#include <sdhci.h>
>> +#include <asm/errno.h>
>> +#include <mach/pic32.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +static int pic32_sdhci_probe(struct udevice *dev)
>> +{
>> +	struct sdhci_host *host = dev_get_priv(dev);
>> +	const void *fdt = gd->fdt_blob;
>> +	u32 f_min_max[2];
>> +	fdt_addr_t addr;
>> +	fdt_size_t size;
>> +	int ret;
>> +
>> +	addr = fdtdec_get_addr_size(fdt, dev->of_offset, "reg",
>> &size);
>> +	if (addr == FDT_ADDR_T_NONE)
>> +		return -EINVAL;
>> +
>> +	host->ioaddr = ioremap(addr, size);
>> +	if (!host->ioaddr)
>> +		return -EINVAL;
> this check can be dropped. ioremap() always returns a mapped address

Ack. Will drop.

>> +
>> +	host->name	= (char *)dev->name;
>> +	host->quirks	= SDHCI_QUIRK_NO_HISPD_BIT;
>> +	host->bus_width	= fdtdec_get_int(gd->fdt_blob, dev
>> ->of_offset,
>> +					"bus-width", 4);
>> +
>> +	ret = fdtdec_get_int_array(gd->fdt_blob, dev->of_offset,
>> +				   "clock-freq-min-max", f_min_max,
>> 2);
>> +	if (ret) {
>> +		printf("sdhci: clock-freq-min-max not found\n");
>> +		return ret;
>> +	}
>> +
>> +	return add_sdhci(host, f_min_max[1], f_min_max[0]);
>> +}
>> +
>> +static const struct udevice_id pic32_sdhci_ids[] = {
>> +	{ .compatible = "microchip,pic32mzda-sdhci" },
>> +	{ }
>> +};
>> +
>> +U_BOOT_DRIVER(pic32_sdhci_drv) = {
>> +	.name			= "pic32_sdhci",
>> +	.id			= UCLASS_MMC,
>> +	.of_match		= pic32_sdhci_ids,
>> +	.probe			= pic32_sdhci_probe,
>> +	.priv_auto_alloc_size	= sizeof(struct sdhci_host),
>> +};
>> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
>> index 02d71b9..f32fe67 100644
>> --- a/drivers/mmc/sdhci.c
>> +++ b/drivers/mmc/sdhci.c
>> @@ -424,6 +424,18 @@ static void sdhci_set_ios(struct mmc *mmc)
>>  	if (host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)
>>  		ctrl &= ~SDHCI_CTRL_HISPD;
>>  
>> +#if defined(CONFIG_PIC32_SDHCI)
>> +	/*
>> +	* In PIC32MZ[DA] due to h/w bug SDHCI fails detecting card
>> when JTAG
>> +	* is not connected.
>> +	* To work-around this problem:
>> +	*  - set Card_Detect_Signal_Selection bit in
>> SDHCI_Host_Control register
>> +	*  - clear Card_Detect_Test_Level bit in SDHCI_Host_Control
>> register
>> +	*/
>> +	ctrl |= SDHCI_CTRL_CD_TEST;
>> +	ctrl &= ~SDHCI_CTRL_CD_TEST_INS;
>> +#endif
> I think this could (or should?) be implemented with a new quirks bit

Will add new quirk (SDHCI_QUIRK_TEST_CD) to force CARD_PRESENT using TEST signals.
It will even help <board>.dts to disable/enable based on its device-tree property.

>> +
>>  	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
>>  }
>>