From: Stefan Agner <stefan.agner@toradex.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/9] serial: lpuart: Move CONFIG_FSL_LPUART to Kconfig
Date: Fri, 15 Jan 2016 13:11:32 -0800 [thread overview]
Message-ID: <56996084.6090100@toradex.com> (raw)
In-Reply-To: <1452742746-31746-4-git-send-email-bmeng.cn@gmail.com>
Looks good to me,
Acked-by: Stefan Agner <stefan.agner@toradex.com>
On 13.01.2016 19:39, Bin Meng wrote:
> LPUART is seen on Freescale VF610 and QorIQ Layerscape devices.
> Create a Kconfig option and move it to defconfig for all boards
> that have this serial driver.
>
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> ---
>
> Changes in v2: None
>
> configs/colibri_vf_defconfig | 1 +
> configs/colibri_vf_dtb_defconfig | 1 +
> configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 1 +
> configs/ls1021aqds_nor_lpuart_defconfig | 1 +
> configs/ls1021atwr_nor_lpuart_defconfig | 1 +
> configs/pcm052_defconfig | 1 +
> configs/vf610twr_defconfig | 1 +
> configs/vf610twr_nand_defconfig | 1 +
> drivers/serial/Kconfig | 6 ++++++
> include/configs/colibri_vf.h | 1 -
> include/configs/ls1021aqds.h | 1 -
> include/configs/ls1021atwr.h | 1 -
> include/configs/pcm052.h | 1 -
> include/configs/vf610twr.h | 1 -
> 14 files changed, 14 insertions(+), 5 deletions(-)
>
> diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
> index f8441e3..45917c8 100644
> --- a/configs/colibri_vf_defconfig
> +++ b/configs/colibri_vf_defconfig
> @@ -8,3 +8,4 @@ CONFIG_CMD_GPIO=y
> CONFIG_DM=y
> CONFIG_NAND_VF610_NFC=y
> CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
> +CONFIG_FSL_LPUART=y
> diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
> index 3596cec..b1a843a 100644
> --- a/configs/colibri_vf_dtb_defconfig
> +++ b/configs/colibri_vf_dtb_defconfig
> @@ -11,3 +11,4 @@ CONFIG_OF_CONTROL=y
> CONFIG_DM=y
> CONFIG_NAND_VF610_NFC=y
> CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
> +CONFIG_FSL_LPUART=y
> diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> index 68bd117..44b2a0d 100644
> --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> @@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_NETDEVICES=y
> CONFIG_E1000=y
> +CONFIG_FSL_LPUART=y
> diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig
> index b2f6832..1186af2 100644
> --- a/configs/ls1021aqds_nor_lpuart_defconfig
> +++ b/configs/ls1021aqds_nor_lpuart_defconfig
> @@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART"
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_NETDEVICES=y
> CONFIG_E1000=y
> +CONFIG_FSL_LPUART=y
> diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig
> index d7afca9..58cd61f 100644
> --- a/configs/ls1021atwr_nor_lpuart_defconfig
> +++ b/configs/ls1021atwr_nor_lpuart_defconfig
> @@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART"
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_NETDEVICES=y
> CONFIG_E1000=y
> +CONFIG_FSL_LPUART=y
> diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig
> index 9125645..26ab733 100644
> --- a/configs/pcm052_defconfig
> +++ b/configs/pcm052_defconfig
> @@ -3,3 +3,4 @@ CONFIG_TARGET_PCM052=y
> CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND"
> CONFIG_NAND_VF610_NFC=y
> CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
> +CONFIG_FSL_LPUART=y
> diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig
> index dc8df5c..d51c93b 100644
> --- a/configs/vf610twr_defconfig
> +++ b/configs/vf610twr_defconfig
> @@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I
> CONFIG_NAND_VF610_NFC=y
> CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
> CONFIG_SPI_FLASH=y
> +CONFIG_FSL_LPUART=y
> diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig
> index 98880f3..299fa8f 100644
> --- a/configs/vf610twr_nand_defconfig
> +++ b/configs/vf610twr_nand_defconfig
> @@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I
> CONFIG_NAND_VF610_NFC=y
> CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
> CONFIG_SPI_FLASH=y
> +CONFIG_FSL_LPUART=y
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index 1fc287e..3b54511 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -186,6 +186,12 @@ config ALTERA_UART
> Select this to enable an UART for Altera devices. Please find
> details on the "Embedded Peripherals IP User Guide" of Altera.
>
> +config FSL_LPUART
> + bool "Freescale LPUART support"
> + help
> + Select this to enable a Low Power UART for Freescale VF610 and
> + QorIQ Layerscape devices.
> +
> config SYS_NS16550
> bool "NS16550 UART or compatible"
> help
> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
> index 708c79a..5aed3a5 100644
> --- a/include/configs/colibri_vf.h
> +++ b/include/configs/colibri_vf.h
> @@ -36,7 +36,6 @@
>
> #define CONFIG_BOARD_EARLY_INIT_F
>
> -#define CONFIG_FSL_LPUART
> #define LPUART_BASE UART0_BASE
>
> /* Allow to overwrite serial and ethaddr */
> diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
> index 2e8dbc7..e8b1eca 100644
> --- a/include/configs/ls1021aqds.h
> +++ b/include/configs/ls1021aqds.h
> @@ -371,7 +371,6 @@ unsigned long get_board_ddr_clk(void);
> * Serial Port
> */
> #ifdef CONFIG_LPUART
> -#define CONFIG_FSL_LPUART
> #define CONFIG_LPUART_32B_REG
> #else
> #define CONFIG_CONS_INDEX 1
> diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
> index bbef2a7..317ba62 100644
> --- a/include/configs/ls1021atwr.h
> +++ b/include/configs/ls1021atwr.h
> @@ -266,7 +266,6 @@
> * Serial Port
> */
> #ifdef CONFIG_LPUART
> -#define CONFIG_FSL_LPUART
> #define CONFIG_LPUART_32B_REG
> #else
> #define CONFIG_CONS_INDEX 1
> diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
> index b851bba..891bdb0 100644
> --- a/include/configs/pcm052.h
> +++ b/include/configs/pcm052.h
> @@ -27,7 +27,6 @@
>
> #define CONFIG_BOARD_EARLY_INIT_F
>
> -#define CONFIG_FSL_LPUART
> #define LPUART_BASE UART1_BASE
>
> /* Allow to overwrite serial and ethaddr */
> diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
> index 34df6f0..dcfafaf 100644
> --- a/include/configs/vf610twr.h
> +++ b/include/configs/vf610twr.h
> @@ -34,7 +34,6 @@
>
> #define CONFIG_BOARD_EARLY_INIT_F
>
> -#define CONFIG_FSL_LPUART
> #define LPUART_BASE UART1_BASE
>
> /* Allow to overwrite serial and ethaddr */
next prev parent reply other threads:[~2016-01-15 21:11 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-14 3:38 [U-Boot] [PATCH v2 0/9] arm: ls1021atwr: Convert to driver model and enable serial support Bin Meng
2016-01-14 3:38 ` [U-Boot] [PATCH v2 1/9] Revert "fdt_support: Add multi-serial support for stdout fixup" Bin Meng
2016-01-20 20:26 ` Simon Glass
2016-01-21 15:18 ` Simon Glass
2016-01-14 3:38 ` [U-Boot] [PATCH v2 2/9] arm: ls1021atwr: Convert to driver model and enable serial support Bin Meng
2016-01-20 20:26 ` Simon Glass
2016-01-21 15:18 ` Simon Glass
2016-01-14 3:39 ` [U-Boot] [PATCH v2 3/9] serial: lpuart: Move CONFIG_FSL_LPUART to Kconfig Bin Meng
2016-01-15 21:11 ` Stefan Agner [this message]
2016-01-20 20:26 ` Simon Glass
2016-01-21 15:18 ` Simon Glass
2016-01-14 3:39 ` [U-Boot] [PATCH v2 4/9] serial: lpuart: Fix several cosmetic issues Bin Meng
2016-01-20 20:27 ` Simon Glass
2016-01-21 15:18 ` Simon Glass
2016-01-14 3:39 ` [U-Boot] [PATCH v2 5/9] serial: lpuart: Call local version of setbrg and putc directly Bin Meng
2016-01-20 20:27 ` Simon Glass
2016-01-21 15:18 ` Simon Glass
2016-01-14 3:39 ` [U-Boot] [PATCH v2 6/9] serial: lpuart: Prepare the driver for DM conversion Bin Meng
2016-01-20 20:27 ` Simon Glass
2016-01-21 15:18 ` Simon Glass
2016-01-14 3:39 ` [U-Boot] [PATCH v2 7/9] serial: lpuart: Add driver model serial support Bin Meng
2016-01-14 8:14 ` Bhuvanchandra DV
2016-01-20 20:27 ` Simon Glass
2016-01-21 15:18 ` Simon Glass
2016-01-14 3:39 ` [U-Boot] [PATCH v2 8/9] arm: ls1021atwr: Split off board device tree Bin Meng
2016-01-20 20:27 ` Simon Glass
2016-01-21 15:18 ` Simon Glass
2016-01-14 3:39 ` [U-Boot] [PATCH v2 9/9] arm: ls1021atwr: Enable driver model lpuart serial driver Bin Meng
2016-01-18 9:39 ` Huan Wang
2016-01-20 20:27 ` Simon Glass
2016-01-21 15:18 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56996084.6090100@toradex.com \
--to=stefan.agner@toradex.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox