From mboxrd@z Thu Jan  1 00:00:00 1970
From: Markus Baier <u-boot_list@baier-network.de>
Date: Sun, 17 Jan 2016 21:44:53 +0100
Subject: [U-Boot] Banan Pro (ahci-sunxi) SATA port stopped working after
 switching to U-Boot v2016.01
Message-ID: <569BFD45.70000@baier-network.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello,

tonight I switched  to the new U-Boot v2016.01
on my Banana Pro system.
I compiled u-boot, like I did with all the working
versions before, with:
make Bananapro_defconfig
make

But with the new U-Boot installed the SATA Port
did not work anymore.
The Kernel is the same 4.0.9-gentoo as I used before
with the last U-Boot Release v2015.10

dmesg show me the following error in the kernel log:
[    1.925032] ahci-sunxi 1c18000.sata: PHY power up failed.
[    1.930661] ahci-sunxi: probe of 1c18000.sata failed with error -5

I also see now SATA message at the U-Boot bootscreen,
the v2015.10 shows me that a SATA Port was recognized
by the U-Boot loader.

Regards
Markus Baier