From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Mon, 18 Jan 2016 07:03:49 +0100 Subject: [U-Boot] [PATCH 1/2] Move all command code into its own directory In-Reply-To: <1453089233-29419-2-git-send-email-sjg@chromium.org> References: <1453089233-29419-1-git-send-email-sjg@chromium.org> <1453089233-29419-2-git-send-email-sjg@chromium.org> Message-ID: <569C8045.4060704@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Simon, On 18.01.2016 04:53, Simon Glass wrote: > There are a lot of unrelated files in common, including all of the commands. > Moving them into their own directory makes them easier to find and is more > logical. > > Some commands include non-command code, such as cmd_scsi.c. This should be > sorted out at some point so that the function can be enabled with or without > the associated command. > > Unfortunately, with m68k I get this error: > > m68k: + M5329AFEE > +arch/m68k/cpu/mcf532x/start.o: In function `_start': > +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o > > I hope someone can shed some light on what this means. I hope it isn't > depending on the position of code in the image. > > Signed-off-by: Simon Glass I've been thinking about doing this as well lately. So: Acked-by: Stefan Roese Thanks, Stefan