From mboxrd@z Thu Jan 1 00:00:00 1970 From: Przemyslaw Marczak Date: Mon, 18 Jan 2016 09:28:33 +0100 Subject: [U-Boot] [PATCH 1/2] Move all command code into its own directory In-Reply-To: <1453089233-29419-2-git-send-email-sjg@chromium.org> References: <1453089233-29419-1-git-send-email-sjg@chromium.org> <1453089233-29419-2-git-send-email-sjg@chromium.org> Message-ID: <569CA231.3020208@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Simon, On 01/18/2016 04:53 AM, Simon Glass wrote: > There are a lot of unrelated files in common, including all of the commands. > Moving them into their own directory makes them easier to find and is more > logical. > > Some commands include non-command code, such as cmd_scsi.c. This should be > sorted out at some point so that the function can be enabled with or without > the associated command. > > Unfortunately, with m68k I get this error: > > m68k: + M5329AFEE > +arch/m68k/cpu/mcf532x/start.o: In function `_start': > +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o > > I hope someone can shed some light on what this means. I hope it isn't > depending on the position of code in the image. > > Signed-off-by: Simon Glass > --- > > Kconfig | 2 + > Makefile | 1 + > cmd/Kconfig | 585 +++++++++++++++++++++++++++++++ > cmd/Makefile | 166 +++++++++ > {common => cmd}/cmd_aes.c | 0 > {common => cmd}/cmd_ambapp.c | 0 > {common => cmd}/cmd_armflash.c | 0 > {common => cmd}/cmd_bdinfo.c | 0 > {common => cmd}/cmd_bedbug.c | 0 > {common => cmd}/cmd_blob.c | 0 > {common => cmd}/cmd_bmp.c | 0 > {common => cmd}/cmd_boot.c | 0 > {common => cmd}/cmd_bootldr.c | 0 > {common => cmd}/cmd_bootm.c | 0 > {common => cmd}/cmd_bootmenu.c | 0 > {common => cmd}/cmd_bootstage.c | 0 > {common => cmd}/cmd_cache.c | 0 > {common => cmd}/cmd_cbfs.c | 0 > {common => cmd}/cmd_clk.c | 0 > {common => cmd}/cmd_console.c | 0 > {common => cmd}/cmd_cplbinfo.c | 0 > {common => cmd}/cmd_cpu.c | 0 > {common => cmd}/cmd_cramfs.c | 0 > {common => cmd}/cmd_dataflash_mmc_mux.c | 0 > {common => cmd}/cmd_date.c | 0 > {common => cmd}/cmd_dcr.c | 0 > {common => cmd}/cmd_demo.c | 0 > {common => cmd}/cmd_dfu.c | 0 > {common => cmd}/cmd_diag.c | 0 > {common => cmd}/cmd_disk.c | 0 > {common => cmd}/cmd_display.c | 0 > {common => cmd}/cmd_dtt.c | 0 > {common => cmd}/cmd_echo.c | 0 > {common => cmd}/cmd_eeprom.c | 0 > {common => cmd}/cmd_efi.c | 0 > {common => cmd}/cmd_elf.c | 0 > {common => cmd}/cmd_ethsw.c | 0 > {common => cmd}/cmd_exit.c | 0 > {common => cmd}/cmd_ext2.c | 0 > {common => cmd}/cmd_ext4.c | 0 > {common => cmd}/cmd_fastboot.c | 0 > {common => cmd}/cmd_fat.c | 0 > {common => cmd}/cmd_fdc.c | 0 > {common => cmd}/cmd_fdt.c | 0 > {common => cmd}/cmd_fitupd.c | 0 > {common => cmd}/cmd_flash.c | 0 > {common => cmd}/cmd_fpga.c | 0 > {common => cmd}/cmd_fpgad.c | 0 > {common => cmd}/cmd_fs.c | 0 > {common => cmd}/cmd_fs_uuid.c | 0 > {common => cmd}/cmd_fuse.c | 0 > {common => cmd}/cmd_gettime.c | 0 > {common => cmd}/cmd_gpio.c | 0 > {common => cmd}/cmd_gpt.c | 0 > {common => cmd}/cmd_hash.c | 0 > {common => cmd}/cmd_help.c | 0 > {common => cmd}/cmd_host.c | 0 > {common => cmd}/cmd_i2c.c | 0 > {common => cmd}/cmd_ide.c | 0 > {common => cmd}/cmd_immap.c | 0 > {common => cmd}/cmd_ini.c | 0 > {common => cmd}/cmd_io.c | 0 > {common => cmd}/cmd_iotrace.c | 0 > {common => cmd}/cmd_irq.c | 0 > {common => cmd}/cmd_itest.c | 0 > {common => cmd}/cmd_jffs2.c | 0 > {common => cmd}/cmd_ldrinfo.c | 0 > {common => cmd}/cmd_led.c | 0 > {common => cmd}/cmd_license.c | 0 > {common => cmd}/cmd_load.c | 0 > {common => cmd}/cmd_log.c | 0 > {common => cmd}/cmd_lzmadec.c | 0 > {common => cmd}/cmd_mac.c | 0 > {common => cmd}/cmd_md5sum.c | 0 > {common => cmd}/cmd_mdio.c | 0 > {common => cmd}/cmd_mem.c | 0 > {common => cmd}/cmd_mfsl.c | 0 > {common => cmd}/cmd_mii.c | 0 > {common => cmd}/cmd_misc.c | 0 > {common => cmd}/cmd_mmc.c | 0 > {common => cmd}/cmd_mmc_spi.c | 0 > {common => cmd}/cmd_mp.c | 0 > {common => cmd}/cmd_mtdparts.c | 0 > {common => cmd}/cmd_nand.c | 0 > {common => cmd}/cmd_net.c | 0 > {common => cmd}/cmd_nvedit.c | 0 > {common => cmd}/cmd_onenand.c | 0 > {common => cmd}/cmd_otp.c | 0 > {common => cmd}/cmd_part.c | 0 > {common => cmd}/cmd_pci.c | 0 > {common => cmd}/cmd_pcmcia.c | 0 > {common => cmd}/cmd_pmic.c | 0 > {common => cmd}/cmd_portio.c | 0 > {common => cmd}/cmd_pxe.c | 0 > {common => cmd}/cmd_read.c | 0 > {common => cmd}/cmd_reginfo.c | 0 > {common => cmd}/cmd_regulator.c | 0 > {common => cmd}/cmd_reiser.c | 0 > {common => cmd}/cmd_remoteproc.c | 0 > {common => cmd}/cmd_sata.c | 0 > {common => cmd}/cmd_scsi.c | 0 > {common => cmd}/cmd_setexpr.c | 0 > {common => cmd}/cmd_sf.c | 0 > {common => cmd}/cmd_sha1sum.c | 0 > {common => cmd}/cmd_softswitch.c | 0 > {common => cmd}/cmd_sound.c | 0 > {common => cmd}/cmd_source.c | 0 > {common => cmd}/cmd_spi.c | 0 > {common => cmd}/cmd_spibootldr.c | 0 > {common => cmd}/cmd_spl.c | 0 > {common => cmd}/cmd_strings.c | 0 > {common => cmd}/cmd_terminal.c | 0 > {common => cmd}/cmd_test.c | 0 > {common => cmd}/cmd_thordown.c | 0 > {common => cmd}/cmd_time.c | 0 > {common => cmd}/cmd_tpm.c | 0 > {common => cmd}/cmd_tpm_test.c | 0 > {common => cmd}/cmd_trace.c | 0 > {common => cmd}/cmd_tsi148.c | 0 > {common => cmd}/cmd_ubi.c | 0 > {common => cmd}/cmd_ubifs.c | 0 > {common => cmd}/cmd_universe.c | 0 > {common => cmd}/cmd_unzip.c | 0 > {common => cmd}/cmd_usb.c | 0 > {common => cmd}/cmd_usb_mass_storage.c | 0 > {common => cmd}/cmd_version.c | 0 > {common => cmd}/cmd_ximg.c | 0 > {common => cmd}/cmd_yaffs2.c | 0 > {common => cmd}/cmd_zfs.c | 0 > {common => cmd}/cmd_zip.c | 0 > common/Kconfig | 586 -------------------------------- > common/Makefile | 156 +-------- > scripts/Makefile.spl | 2 +- > 133 files changed, 761 insertions(+), 737 deletions(-) > create mode 100644 cmd/Kconfig > create mode 100644 cmd/Makefile > rename {common => cmd}/cmd_aes.c (100%) > rename {common => cmd}/cmd_ambapp.c (100%) > rename {common => cmd}/cmd_armflash.c (100%) > rename {common => cmd}/cmd_bdinfo.c (100%) > rename {common => cmd}/cmd_bedbug.c (100%) > rename {common => cmd}/cmd_blob.c (100%) > rename {common => cmd}/cmd_bmp.c (100%) > rename {common => cmd}/cmd_boot.c (100%) > rename {common => cmd}/cmd_bootldr.c (100%) > rename {common => cmd}/cmd_bootm.c (100%) > rename {common => cmd}/cmd_bootmenu.c (100%) > rename {common => cmd}/cmd_bootstage.c (100%) > rename {common => cmd}/cmd_cache.c (100%) > rename {common => cmd}/cmd_cbfs.c (100%) > rename {common => cmd}/cmd_clk.c (100%) > rename {common => cmd}/cmd_console.c (100%) > rename {common => cmd}/cmd_cplbinfo.c (100%) > rename {common => cmd}/cmd_cpu.c (100%) > rename {common => cmd}/cmd_cramfs.c (100%) > rename {common => cmd}/cmd_dataflash_mmc_mux.c (100%) > rename {common => cmd}/cmd_date.c (100%) > rename {common => cmd}/cmd_dcr.c (100%) > rename {common => cmd}/cmd_demo.c (100%) > rename {common => cmd}/cmd_dfu.c (100%) > rename {common => cmd}/cmd_diag.c (100%) > rename {common => cmd}/cmd_disk.c (100%) > rename {common => cmd}/cmd_display.c (100%) > rename {common => cmd}/cmd_dtt.c (100%) > rename {common => cmd}/cmd_echo.c (100%) > rename {common => cmd}/cmd_eeprom.c (100%) > rename {common => cmd}/cmd_efi.c (100%) > rename {common => cmd}/cmd_elf.c (100%) > rename {common => cmd}/cmd_ethsw.c (100%) > rename {common => cmd}/cmd_exit.c (100%) > rename {common => cmd}/cmd_ext2.c (100%) > rename {common => cmd}/cmd_ext4.c (100%) > rename {common => cmd}/cmd_fastboot.c (100%) > rename {common => cmd}/cmd_fat.c (100%) > rename {common => cmd}/cmd_fdc.c (100%) > rename {common => cmd}/cmd_fdt.c (100%) > rename {common => cmd}/cmd_fitupd.c (100%) > rename {common => cmd}/cmd_flash.c (100%) > rename {common => cmd}/cmd_fpga.c (100%) > rename {common => cmd}/cmd_fpgad.c (100%) > rename {common => cmd}/cmd_fs.c (100%) > rename {common => cmd}/cmd_fs_uuid.c (100%) > rename {common => cmd}/cmd_fuse.c (100%) > rename {common => cmd}/cmd_gettime.c (100%) > rename {common => cmd}/cmd_gpio.c (100%) > rename {common => cmd}/cmd_gpt.c (100%) > rename {common => cmd}/cmd_hash.c (100%) > rename {common => cmd}/cmd_help.c (100%) > rename {common => cmd}/cmd_host.c (100%) > rename {common => cmd}/cmd_i2c.c (100%) > rename {common => cmd}/cmd_ide.c (100%) > rename {common => cmd}/cmd_immap.c (100%) > rename {common => cmd}/cmd_ini.c (100%) > rename {common => cmd}/cmd_io.c (100%) > rename {common => cmd}/cmd_iotrace.c (100%) > rename {common => cmd}/cmd_irq.c (100%) > rename {common => cmd}/cmd_itest.c (100%) > rename {common => cmd}/cmd_jffs2.c (100%) > rename {common => cmd}/cmd_ldrinfo.c (100%) > rename {common => cmd}/cmd_led.c (100%) > rename {common => cmd}/cmd_license.c (100%) > rename {common => cmd}/cmd_load.c (100%) > rename {common => cmd}/cmd_log.c (100%) > rename {common => cmd}/cmd_lzmadec.c (100%) > rename {common => cmd}/cmd_mac.c (100%) > rename {common => cmd}/cmd_md5sum.c (100%) > rename {common => cmd}/cmd_mdio.c (100%) > rename {common => cmd}/cmd_mem.c (100%) > rename {common => cmd}/cmd_mfsl.c (100%) > rename {common => cmd}/cmd_mii.c (100%) > rename {common => cmd}/cmd_misc.c (100%) > rename {common => cmd}/cmd_mmc.c (100%) > rename {common => cmd}/cmd_mmc_spi.c (100%) > rename {common => cmd}/cmd_mp.c (100%) > rename {common => cmd}/cmd_mtdparts.c (100%) > rename {common => cmd}/cmd_nand.c (100%) > rename {common => cmd}/cmd_net.c (100%) > rename {common => cmd}/cmd_nvedit.c (100%) > rename {common => cmd}/cmd_onenand.c (100%) > rename {common => cmd}/cmd_otp.c (100%) > rename {common => cmd}/cmd_part.c (100%) > rename {common => cmd}/cmd_pci.c (100%) > rename {common => cmd}/cmd_pcmcia.c (100%) > rename {common => cmd}/cmd_pmic.c (100%) > rename {common => cmd}/cmd_portio.c (100%) > rename {common => cmd}/cmd_pxe.c (100%) > rename {common => cmd}/cmd_read.c (100%) > rename {common => cmd}/cmd_reginfo.c (100%) > rename {common => cmd}/cmd_regulator.c (100%) > rename {common => cmd}/cmd_reiser.c (100%) > rename {common => cmd}/cmd_remoteproc.c (100%) > rename {common => cmd}/cmd_sata.c (100%) > rename {common => cmd}/cmd_scsi.c (100%) > rename {common => cmd}/cmd_setexpr.c (100%) > rename {common => cmd}/cmd_sf.c (100%) > rename {common => cmd}/cmd_sha1sum.c (100%) > rename {common => cmd}/cmd_softswitch.c (100%) > rename {common => cmd}/cmd_sound.c (100%) > rename {common => cmd}/cmd_source.c (100%) > rename {common => cmd}/cmd_spi.c (100%) > rename {common => cmd}/cmd_spibootldr.c (100%) > rename {common => cmd}/cmd_spl.c (100%) > rename {common => cmd}/cmd_strings.c (100%) > rename {common => cmd}/cmd_terminal.c (100%) > rename {common => cmd}/cmd_test.c (100%) > rename {common => cmd}/cmd_thordown.c (100%) > rename {common => cmd}/cmd_time.c (100%) > rename {common => cmd}/cmd_tpm.c (100%) > rename {common => cmd}/cmd_tpm_test.c (100%) > rename {common => cmd}/cmd_trace.c (100%) > rename {common => cmd}/cmd_tsi148.c (100%) > rename {common => cmd}/cmd_ubi.c (100%) > rename {common => cmd}/cmd_ubifs.c (100%) > rename {common => cmd}/cmd_universe.c (100%) > rename {common => cmd}/cmd_unzip.c (100%) > rename {common => cmd}/cmd_usb.c (100%) > rename {common => cmd}/cmd_usb_mass_storage.c (100%) > rename {common => cmd}/cmd_version.c (100%) > rename {common => cmd}/cmd_ximg.c (100%) > rename {common => cmd}/cmd_yaffs2.c (100%) > rename {common => cmd}/cmd_zfs.c (100%) > rename {common => cmd}/cmd_zip.c (100%) > > diff --git a/Kconfig b/Kconfig > index 821b464..d5e503a 100644 > --- a/Kconfig > +++ b/Kconfig > @@ -224,6 +224,8 @@ endmenu # Boot images > > source "common/Kconfig" > > +source "cmd/Kconfig" > + > source "dts/Kconfig" > > source "net/Kconfig" > diff --git a/Makefile b/Makefile > index 5882c30..6a67efb 100644 > --- a/Makefile > +++ b/Makefile > @@ -667,6 +667,7 @@ libs-y += drivers/usb/musb/ > libs-y += drivers/usb/musb-new/ > libs-y += drivers/usb/phy/ > libs-y += drivers/usb/ulpi/ > +libs-y += cmd/ > libs-y += common/ > libs-$(CONFIG_API) += api/ > libs-$(CONFIG_HAS_POST) += post/ > diff --git a/cmd/Kconfig b/cmd/Kconfig > new file mode 100644 > index 0000000..2ed0263 > --- /dev/null > +++ b/cmd/Kconfig > @@ -0,0 +1,585 @@ > +menu "Command line interface" > + > +config HUSH_PARSER > + bool "Use hush shell" > + select SYS_HUSH_PARSER > + help > + This option enables the "hush" shell (from Busybox) as command line > + interpreter, thus enabling powerful command line syntax like > + if...then...else...fi conditionals or `&&' and '||' > + constructs ("shell scripts"). > + > + If disabled, you get the old, much simpler behaviour with a somewhat > + smaller memory footprint. > + > +config SYS_HUSH_PARSER > + bool > + help > + Backward compatibility. > + > +config SYS_PROMPT > + string "Shell prompt" > + default "=> " > + help > + This string is displayed in the command line to the left of the > + cursor. > + > +menu "Autoboot options" > + > +config AUTOBOOT_KEYED > + bool "Stop autobooting via specific input key / string" > + default n > + help > + This option enables stopping (aborting) of the automatic > + boot feature only by issuing a specific input key or > + string. If not enabled, any input key will abort the > + U-Boot automatic booting process and bring the device > + to the U-Boot prompt for user input. > + > +config AUTOBOOT_PROMPT > + string "Autoboot stop prompt" > + depends on AUTOBOOT_KEYED > + default "Autoboot in %d seconds\\n" > + help > + This string is displayed before the boot delay selected by > + CONFIG_BOOTDELAY starts. If it is not defined there is no > + output indicating that autoboot is in progress. > + > + Note that this define is used as the (only) argument to a > + printf() call, so it may contain '%' format specifications, > + provided that it also includes, sepearated by commas exactly > + like in a printf statement, the required arguments. It is > + the responsibility of the user to select only such arguments > + that are valid in the given context. > + > +config AUTOBOOT_ENCRYPTION > + bool "Enable encryption in autoboot stopping" > + depends on AUTOBOOT_KEYED > + default n > + > +config AUTOBOOT_DELAY_STR > + string "Delay autobooting via specific input key / string" > + depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION > + help > + This option delays the automatic boot feature by issuing > + a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR > + or the environment variable "bootdelaykey" is specified > + and this string is received from console input before > + autoboot starts booting, U-Boot gives a command prompt. The > + U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is > + used, otherwise it never times out. > + > +config AUTOBOOT_STOP_STR > + string "Stop autobooting via specific input key / string" > + depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION > + help > + This option enables stopping (aborting) of the automatic > + boot feature only by issuing a specific input key or > + string. If CONFIG_AUTOBOOT_STOP_STR or the environment > + variable "bootstopkey" is specified and this string is > + received from console input before autoboot starts booting, > + U-Boot gives a command prompt. The U-Boot prompt never > + times out, even if CONFIG_BOOT_RETRY_TIME is used. > + > +config AUTOBOOT_KEYED_CTRLC > + bool "Enable Ctrl-C autoboot interruption" > + depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION > + default n > + help > + This option allows for the boot sequence to be interrupted > + by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey". > + Setting this variable provides an escape sequence from the > + limited "password" strings. > + > +config AUTOBOOT_STOP_STR_SHA256 > + string "Stop autobooting via SHA256 encrypted password" > + depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION > + help > + This option adds the feature to only stop the autobooting, > + and therefore boot into the U-Boot prompt, when the input > + string / password matches a values that is encypted via > + a SHA256 hash and saved in the environment. > + > +endmenu > + > +comment "Commands" > + > +menu "Info commands" > + > +config CMD_BDI > + bool "bdinfo" > + default y > + help > + Print board info > + > +config CMD_CONSOLE > + bool "coninfo" > + default y > + help > + Print console devices and information. > + > +config CMD_CPU > + bool "cpu" > + help > + Print information about available CPUs. This normally shows the > + number of CPUs, type (e.g. manufacturer, architecture, product or > + internal name) and clock frequency. Other information may be > + available depending on the CPU driver. > + > +config CMD_LICENSE > + bool "license" > + help > + Print GPL license text > + > +endmenu > + > +menu "Boot commands" > + > +config CMD_BOOTD > + bool "bootd" > + default y > + help > + Run the command stored in the environment "bootcmd", i.e. > + "bootd" does the same thing as "run bootcmd". > + > +config CMD_BOOTM > + bool "bootm" > + default y > + help > + Boot an application image from the memory. > + > +config CMD_ELF > + bool "bootelf, bootvx" > + default y > + help > + Boot an ELF/vxWorks image from the memory. > + > +config CMD_GO > + bool "go" > + default y > + help > + Start an application at a given address. > + > +config CMD_RUN > + bool "run" > + default y > + help > + Run the command in the given environment variable. > + > +config CMD_IMI > + bool "iminfo" > + default y > + help > + Print header information for application image. > + > +config CMD_IMLS > + bool "imls" > + default y > + help > + List all images found in flash > + > +config CMD_XIMG > + bool "imxtract" > + default y > + help > + Extract a part of a multi-image. > + > +config CMD_POWEROFF > + bool > + > +endmenu > + > +menu "Environment commands" > + > +config CMD_EXPORTENV > + bool "env export" > + default y > + help > + Export environments. > + > +config CMD_IMPORTENV > + bool "env import" > + default y > + help > + Import environments. > + > +config CMD_EDITENV > + bool "editenv" > + default y > + help > + Edit environment variable. > + > +config CMD_SAVEENV > + bool "saveenv" > + default y > + help > + Save all environment variables into the compiled-in persistent > + storage. > + > +config CMD_ENV_EXISTS > + bool "env exists" > + default y > + help > + Check if a variable is defined in the environment for use in > + shell scripting. > + > +endmenu > + > +menu "Memory commands" > + > +config CMD_MEMORY > + bool "md, mm, nm, mw, cp, cmp, base, loop" > + default y > + help > + Memeory commands. > + md - memory display > + mm - memory modify (auto-incrementing address) > + nm - memory modify (constant address) > + mw - memory write (fill) > + cp - memory copy > + cmp - memory compare > + base - print or set address offset > + loop - initinite loop on address range > + > +config CMD_CRC32 > + bool "crc32" > + default y > + help > + Compute CRC32. > + > +config LOOPW > + bool "loopw" > + help > + Infinite write loop on address range > + > +config CMD_MEMTEST > + bool "memtest" > + help > + Simple RAM read/write test. > + > +config CMD_MX_CYCLIC > + bool "mdc, mwc" > + help > + mdc - memory display cyclic > + mwc - memory write cyclic > + > +config CMD_MEMINFO > + bool "meminfo" > + help > + Display memory information. > + > +endmenu > + > +menu "Device access commands" > + > +config CMD_DM > + bool "dm - Access to driver model information" > + depends on DM > + default y > + help > + Provides access to driver model data structures and information, > + such as a list of devices, list of uclasses and the state of each > + device (e.g. activated). This is not required for operation, but > + can be useful to see the state of driver model for debugging or > + interest. > + > +config CMD_DEMO > + bool "demo - Demonstration commands for driver model" > + depends on DM > + help > + Provides a 'demo' command which can be used to play around with > + driver model. To use this properly you will need to enable one or > + both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). > + Otherwise you will always get an empty list of devices. The demo > + devices are defined in the sandbox device tree, so the easiest > + option is to use sandbox and pass the -d point to sandbox's > + u-boot.dtb file. > + > +config CMD_LOADB > + bool "loadb" > + default y > + help > + Load a binary file over serial line. > + > +config CMD_LOADS > + bool "loads" > + default y > + help > + Load an S-Record file over serial line > + > +config CMD_FLASH > + bool "flinfo, erase, protect" > + default y > + help > + NOR flash support. > + flinfo - print FLASH memory information > + erase - FLASH memory > + protect - enable or disable FLASH write protection > + > +config CMD_ARMFLASH > + depends on FLASH_CFI_DRIVER > + bool "armflash" > + help > + ARM Ltd reference designs flash partition access > + > +config CMD_NAND > + bool "nand" > + help > + NAND support. > + > +config CMD_SF > + bool "sf" > + help > + SPI Flash support > + > +config CMD_SPI > + bool "sspi" > + help > + SPI utility command. > + > +config CMD_I2C > + bool "i2c" > + help > + I2C support. > + > +config CMD_USB > + bool "usb" > + help > + USB support. > + > +config CMD_FPGA > + bool "fpga" > + default y > + help > + FPGA support. > + > +config CMD_REMOTEPROC > + bool "remoteproc" > + depends on REMOTEPROC > + help > + Support for Remote Processor control > + > +config CMD_GPIO > + bool "gpio" > + help > + GPIO support. > + > +endmenu > + > + > +menu "Shell scripting commands" > + > +config CMD_ECHO > + bool "echo" > + default y > + help > + Echo args to console > + > +config CMD_ITEST > + bool "itest" > + default y > + help > + Return true/false on integer compare. > + > +config CMD_SOURCE > + bool "source" > + default y > + help > + Run script from memory > + > +config CMD_SETEXPR > + bool "setexpr" > + default y > + help > + Evaluate boolean and math expressions and store the result in an env > + variable. > + Also supports loading the value at a memory location into a variable. > + If CONFIG_REGEX is enabled, setexpr also supports a gsub function. > + > +endmenu > + > +menu "Network commands" > + > +config CMD_NET > + bool "bootp, tftpboot" > + select NET > + default y > + help > + Network commands. > + bootp - boot image via network using BOOTP/TFTP protocol > + tftpboot - boot image via network using TFTP protocol > + > +config CMD_TFTPPUT > + bool "tftp put" > + help > + TFTP put command, for uploading files to a server > + > +config CMD_TFTPSRV > + bool "tftpsrv" > + help > + Act as a TFTP server and boot the first received file > + > +config CMD_RARP > + bool "rarpboot" > + help > + Boot image via network using RARP/TFTP protocol > + > +config CMD_DHCP > + bool "dhcp" > + help > + Boot image via network using DHCP/TFTP protocol > + > +config CMD_NFS > + bool "nfs" > + default y > + help > + Boot image via network using NFS protocol. > + > +config CMD_PING > + bool "ping" > + help > + Send ICMP ECHO_REQUEST to network host > + > +config CMD_CDP > + bool "cdp" > + help > + Perform CDP network configuration > + > +config CMD_SNTP > + bool "sntp" > + help > + Synchronize RTC via network > + > +config CMD_DNS > + bool "dns" > + help > + Lookup the IP of a hostname > + > +config CMD_LINK_LOCAL > + bool "linklocal" > + help > + Acquire a network IP address using the link-local protocol > + > +endmenu > + > +menu "Misc commands" > + > +config CMD_AMBAPP > + bool "ambapp" > + depends on LEON3 > + default y > + help > + Lists AMBA Plug-n-Play information. > + > +config SYS_AMBAPP_PRINT_ON_STARTUP > + bool "Show AMBA PnP info on startup" > + depends on CMD_AMBAPP > + default n > + help > + Show AMBA Plug-n-Play information on startup. > + > +config CMD_TIME > + bool "time" > + help > + Run commands and summarize execution time. > + > +# TODO: rename to CMD_SLEEP > +config CMD_MISC > + bool "sleep" > + default y > + help > + Delay execution for some time > + > +config CMD_TIMER > + bool "timer" > + help > + Access the system timer. > + > +config CMD_SETGETDCR > + bool "getdcr, setdcr, getidcr, setidcr" > + depends on 4xx > + default y > + help > + getdcr - Get an AMCC PPC 4xx DCR's value > + setdcr - Set an AMCC PPC 4xx DCR's value > + getidcr - Get a register value via indirect DCR addressing > + setidcr - Set a register value via indirect DCR addressing > + > +config CMD_SOUND > + bool "sound" > + depends on SOUND > + help > + This provides basic access to the U-Boot's sound support. The main > + feature is to play a beep. > + > + sound init - set up sound system > + sound play - play a sound > + > +endmenu > + > +config CMD_BOOTSTAGE > + bool "Enable the 'bootstage' command" > + depends on BOOTSTAGE > + help > + Add a 'bootstage' command which supports printing a report > + and un/stashing of bootstage data. > + > +menu "Power commands" > +config CMD_PMIC > + bool "Enable Driver Model PMIC command" > + depends on DM_PMIC > + help > + This is the pmic command, based on a driver model pmic's API. > + Command features are unchanged: > + - list - list pmic devices > + - pmic dev - show or [set] operating pmic device (NEW) > + - pmic dump - dump registers > + - pmic read address - read byte of register at address > + - pmic write address - write byte to register at address > + The only one change for this command is 'dev' subcommand. > + > +config CMD_REGULATOR > + bool "Enable Driver Model REGULATOR command" > + depends on DM_REGULATOR > + help > + This command is based on driver model regulator's API. > + User interface features: > + - list - list regulator devices > + - regulator dev - show or [set] operating regulator device > + - regulator info - print constraints info > + - regulator status - print operating status > + - regulator value - print/[set] voltage value [uV] > + - regulator current - print/[set] current value [uA] > + - regulator mode - print/[set] operating mode id > + - regulator enable - enable the regulator output > + - regulator disable - disable the regulator output > + > + The '-f' (force) option can be used for set the value which exceeds > + the limits, which are found in device-tree and are kept in regulator's > + uclass platdata structure. > + > +endmenu > + > +menu "Security commands" > +config CMD_TPM > + bool "Enable the 'tpm' command" > + depends on TPM > + help > + This provides a means to talk to a TPM from the command line. A wide > + range of commands if provided - see 'tpm help' for details. The > + command requires a suitable TPM on your board and the correct driver > + must be enabled. > + > +config CMD_TPM_TEST > + bool "Enable the 'tpm test' command" > + depends on CMD_TPM > + help > + This provides a a series of tests to confirm that the TPM is working > + correctly. The tests cover initialisation, non-volatile RAM, extend, > + global lock and checking that timing is within expectations. The > + tests pass correctly on Infineon TPMs but may need to be adjusted > + for other devices. > + > +endmenu > + > +endmenu > diff --git a/cmd/Makefile b/cmd/Makefile > new file mode 100644 > index 0000000..880a886 > --- /dev/null > +++ b/cmd/Makefile > @@ -0,0 +1,166 @@ > +# > +# (C) Copyright 2004-2006 > +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. > +# > +# SPDX-License-Identifier: GPL-2.0+ > +# > + > +ifndef CONFIG_SPL_BUILD > +# core command > +obj-y += cmd_boot.o > +obj-$(CONFIG_CMD_BOOTM) += cmd_bootm.o > +obj-y += cmd_help.o > +obj-y += cmd_version.o > + > +# command > +obj-$(CONFIG_CMD_AES) += cmd_aes.o > +obj-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o > +obj-$(CONFIG_CMD_ARMFLASH) += cmd_armflash.o > +obj-$(CONFIG_SOURCE) += cmd_source.o > +obj-$(CONFIG_CMD_SOURCE) += cmd_source.o > +obj-$(CONFIG_CMD_BDI) += cmd_bdinfo.o > +obj-$(CONFIG_CMD_BEDBUG) += cmd_bedbug.o > +obj-$(CONFIG_CMD_BMP) += cmd_bmp.o > +obj-$(CONFIG_CMD_BOOTMENU) += cmd_bootmenu.o > +obj-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o > +obj-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o > +obj-$(CONFIG_CMD_CACHE) += cmd_cache.o > +obj-$(CONFIG_CMD_CBFS) += cmd_cbfs.o > +obj-$(CONFIG_CMD_CLK) += cmd_clk.o > +obj-$(CONFIG_CMD_CONSOLE) += cmd_console.o > +obj-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o > +obj-$(CONFIG_CMD_CPU) += cmd_cpu.o > +obj-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o > +obj-$(CONFIG_CMD_DATE) += cmd_date.o > +obj-$(CONFIG_CMD_DEMO) += cmd_demo.o > +obj-$(CONFIG_CMD_SOUND) += cmd_sound.o > +ifdef CONFIG_4xx > +obj-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o > +endif > +ifdef CONFIG_POST > +obj-$(CONFIG_CMD_DIAG) += cmd_diag.o > +endif > +obj-$(CONFIG_CMD_DISPLAY) += cmd_display.o > +obj-$(CONFIG_CMD_DTT) += cmd_dtt.o > +obj-$(CONFIG_CMD_ECHO) += cmd_echo.o > +obj-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o > +obj-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o > +obj-$(CONFIG_EFI_STUB) += cmd_efi.o > +obj-$(CONFIG_CMD_ELF) += cmd_elf.o > +obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o > +obj-$(CONFIG_CMD_EXT4) += cmd_ext4.o > +obj-$(CONFIG_CMD_EXT2) += cmd_ext2.o > +obj-$(CONFIG_CMD_FAT) += cmd_fat.o > +obj-$(CONFIG_CMD_FDC) += cmd_fdc.o > +obj-$(CONFIG_OF_LIBFDT) += cmd_fdt.o > +obj-$(CONFIG_CMD_FITUPD) += cmd_fitupd.o > +obj-$(CONFIG_CMD_FLASH) += cmd_flash.o > +ifdef CONFIG_FPGA > +obj-$(CONFIG_CMD_FPGA) += cmd_fpga.o > +endif > +obj-$(CONFIG_CMD_FPGAD) += cmd_fpgad.o > +obj-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o > +obj-$(CONFIG_CMD_FUSE) += cmd_fuse.o > +obj-$(CONFIG_CMD_GETTIME) += cmd_gettime.o > +obj-$(CONFIG_CMD_GPIO) += cmd_gpio.o > +obj-$(CONFIG_CMD_I2C) += cmd_i2c.o > +obj-$(CONFIG_CMD_IOTRACE) += cmd_iotrace.o > +obj-$(CONFIG_CMD_HASH) += cmd_hash.o > +obj-$(CONFIG_CMD_IDE) += cmd_ide.o > +obj-$(CONFIG_CMD_IMMAP) += cmd_immap.o > +obj-$(CONFIG_CMD_INI) += cmd_ini.o > +obj-$(CONFIG_CMD_IRQ) += cmd_irq.o > +obj-$(CONFIG_CMD_ITEST) += cmd_itest.o > +obj-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o > +obj-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o > +obj-$(CONFIG_CMD_LDRINFO) += cmd_ldrinfo.o > +obj-$(CONFIG_CMD_LED) += cmd_led.o > +obj-$(CONFIG_CMD_LICENSE) += cmd_license.o > +obj-y += cmd_load.o > +obj-$(CONFIG_LOGBUFFER) += cmd_log.o > +obj-$(CONFIG_ID_EEPROM) += cmd_mac.o > +obj-$(CONFIG_CMD_MD5SUM) += cmd_md5sum.o > +obj-$(CONFIG_CMD_MEMORY) += cmd_mem.o > +obj-$(CONFIG_CMD_IO) += cmd_io.o > +obj-$(CONFIG_CMD_MFSL) += cmd_mfsl.o > +obj-$(CONFIG_CMD_MII) += cmd_mii.o > +ifdef CONFIG_PHYLIB > +obj-$(CONFIG_CMD_MII) += cmd_mdio.o > +endif > +obj-$(CONFIG_CMD_MISC) += cmd_misc.o > +obj-$(CONFIG_CMD_MMC) += cmd_mmc.o > +obj-$(CONFIG_CMD_MMC_SPI) += cmd_mmc_spi.o > +obj-$(CONFIG_MP) += cmd_mp.o > +obj-$(CONFIG_CMD_MTDPARTS) += cmd_mtdparts.o > +obj-$(CONFIG_CMD_NAND) += cmd_nand.o > +obj-$(CONFIG_CMD_NET) += cmd_net.o > +obj-$(CONFIG_CMD_ONENAND) += cmd_onenand.o > +obj-$(CONFIG_CMD_OTP) += cmd_otp.o > +obj-$(CONFIG_CMD_PART) += cmd_part.o > +ifdef CONFIG_PCI > +obj-$(CONFIG_CMD_PCI) += cmd_pci.o > +endif > +obj-y += cmd_pcmcia.o > +obj-$(CONFIG_CMD_PORTIO) += cmd_portio.o > +obj-$(CONFIG_CMD_PXE) += cmd_pxe.o > +obj-$(CONFIG_CMD_READ) += cmd_read.o > +obj-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o > +obj-$(CONFIG_CMD_REISER) += cmd_reiser.o > +obj-$(CONFIG_CMD_REMOTEPROC) += cmd_remoteproc.o > +obj-$(CONFIG_SANDBOX) += cmd_host.o > +obj-$(CONFIG_CMD_SATA) += cmd_sata.o > +obj-$(CONFIG_CMD_SF) += cmd_sf.o > +obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o > +obj-$(CONFIG_CMD_SHA1SUM) += cmd_sha1sum.o > +obj-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o > +obj-$(CONFIG_CMD_SOFTSWITCH) += cmd_softswitch.o > +obj-$(CONFIG_CMD_SPI) += cmd_spi.o > +obj-$(CONFIG_CMD_SPIBOOTLDR) += cmd_spibootldr.o > +obj-$(CONFIG_CMD_STRINGS) += cmd_strings.o > +obj-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o > +obj-$(CONFIG_CMD_TIME) += cmd_time.o > +obj-$(CONFIG_CMD_TRACE) += cmd_trace.o > +obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_test.o > +obj-$(CONFIG_CMD_TPM) += cmd_tpm.o > +obj-$(CONFIG_CMD_TPM_TEST) += cmd_tpm_test.o > +obj-$(CONFIG_CMD_TSI148) += cmd_tsi148.o > +obj-$(CONFIG_CMD_UBI) += cmd_ubi.o > +obj-$(CONFIG_CMD_UBIFS) += cmd_ubifs.o > +obj-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o > +obj-$(CONFIG_CMD_UNZIP) += cmd_unzip.o > +ifdef CONFIG_LZMA > +obj-$(CONFIG_CMD_LZMADEC) += cmd_lzmadec.o > +endif > + > +obj-$(CONFIG_CMD_USB) += cmd_usb.o > +obj-$(CONFIG_CMD_FASTBOOT) += cmd_fastboot.o > +obj-$(CONFIG_CMD_FS_UUID) += cmd_fs_uuid.o > + > +obj-$(CONFIG_CMD_USB_MASS_STORAGE) += cmd_usb_mass_storage.o > +obj-$(CONFIG_CMD_THOR_DOWNLOAD) += cmd_thordown.o > +obj-$(CONFIG_CMD_XIMG) += cmd_ximg.o > +obj-$(CONFIG_YAFFS2) += cmd_yaffs2.o > +obj-$(CONFIG_CMD_SPL) += cmd_spl.o > +obj-$(CONFIG_CMD_ZIP) += cmd_zip.o > +obj-$(CONFIG_CMD_ZFS) += cmd_zfs.o > + > +obj-$(CONFIG_CMD_DFU) += cmd_dfu.o > +obj-$(CONFIG_CMD_GPT) += cmd_gpt.o > +obj-$(CONFIG_CMD_ETHSW) += cmd_ethsw.o > + > +# Power > +obj-$(CONFIG_CMD_PMIC) += cmd_pmic.o > +obj-$(CONFIG_CMD_REGULATOR) += cmd_regulator.o > +endif # !CONFIG_SPL_BUILD > + > +ifdef CONFIG_SPL_BUILD > +ifdef CONFIG_SPL_SATA_SUPPORT > +obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o > +endif > +endif # CONFIG_SPL_BUILD > + > +obj-$(CONFIG_CMD_BLOB) += cmd_blob.o > + > +# core command > +obj-y += cmd_nvedit.o > +obj-y += cmd_disk.o > diff --git a/common/cmd_aes.c b/cmd/cmd_aes.c > similarity index 100% > rename from common/cmd_aes.c > rename to cmd/cmd_aes.c > diff --git a/common/cmd_ambapp.c b/cmd/cmd_ambapp.c > similarity index 100% > rename from common/cmd_ambapp.c > rename to cmd/cmd_ambapp.c > diff --git a/common/cmd_armflash.c b/cmd/cmd_armflash.c > similarity index 100% > rename from common/cmd_armflash.c > rename to cmd/cmd_armflash.c > diff --git a/common/cmd_bdinfo.c b/cmd/cmd_bdinfo.c > similarity index 100% > rename from common/cmd_bdinfo.c > rename to cmd/cmd_bdinfo.c > diff --git a/common/cmd_bedbug.c b/cmd/cmd_bedbug.c > similarity index 100% > rename from common/cmd_bedbug.c > rename to cmd/cmd_bedbug.c > diff --git a/common/cmd_blob.c b/cmd/cmd_blob.c > similarity index 100% > rename from common/cmd_blob.c > rename to cmd/cmd_blob.c > diff --git a/common/cmd_bmp.c b/cmd/cmd_bmp.c > similarity index 100% > rename from common/cmd_bmp.c > rename to cmd/cmd_bmp.c > diff --git a/common/cmd_boot.c b/cmd/cmd_boot.c > similarity index 100% > rename from common/cmd_boot.c > rename to cmd/cmd_boot.c > diff --git a/common/cmd_bootldr.c b/cmd/cmd_bootldr.c > similarity index 100% > rename from common/cmd_bootldr.c > rename to cmd/cmd_bootldr.c > diff --git a/common/cmd_bootm.c b/cmd/cmd_bootm.c > similarity index 100% > rename from common/cmd_bootm.c > rename to cmd/cmd_bootm.c > diff --git a/common/cmd_bootmenu.c b/cmd/cmd_bootmenu.c > similarity index 100% > rename from common/cmd_bootmenu.c > rename to cmd/cmd_bootmenu.c > diff --git a/common/cmd_bootstage.c b/cmd/cmd_bootstage.c > similarity index 100% > rename from common/cmd_bootstage.c > rename to cmd/cmd_bootstage.c > diff --git a/common/cmd_cache.c b/cmd/cmd_cache.c > similarity index 100% > rename from common/cmd_cache.c > rename to cmd/cmd_cache.c > diff --git a/common/cmd_cbfs.c b/cmd/cmd_cbfs.c > similarity index 100% > rename from common/cmd_cbfs.c > rename to cmd/cmd_cbfs.c > diff --git a/common/cmd_clk.c b/cmd/cmd_clk.c > similarity index 100% > rename from common/cmd_clk.c > rename to cmd/cmd_clk.c > diff --git a/common/cmd_console.c b/cmd/cmd_console.c > similarity index 100% > rename from common/cmd_console.c > rename to cmd/cmd_console.c > diff --git a/common/cmd_cplbinfo.c b/cmd/cmd_cplbinfo.c > similarity index 100% > rename from common/cmd_cplbinfo.c > rename to cmd/cmd_cplbinfo.c > diff --git a/common/cmd_cpu.c b/cmd/cmd_cpu.c > similarity index 100% > rename from common/cmd_cpu.c > rename to cmd/cmd_cpu.c > diff --git a/common/cmd_cramfs.c b/cmd/cmd_cramfs.c > similarity index 100% > rename from common/cmd_cramfs.c > rename to cmd/cmd_cramfs.c > diff --git a/common/cmd_dataflash_mmc_mux.c b/cmd/cmd_dataflash_mmc_mux.c > similarity index 100% > rename from common/cmd_dataflash_mmc_mux.c > rename to cmd/cmd_dataflash_mmc_mux.c > diff --git a/common/cmd_date.c b/cmd/cmd_date.c > similarity index 100% > rename from common/cmd_date.c > rename to cmd/cmd_date.c > diff --git a/common/cmd_dcr.c b/cmd/cmd_dcr.c > similarity index 100% > rename from common/cmd_dcr.c > rename to cmd/cmd_dcr.c > diff --git a/common/cmd_demo.c b/cmd/cmd_demo.c > similarity index 100% > rename from common/cmd_demo.c > rename to cmd/cmd_demo.c > diff --git a/common/cmd_dfu.c b/cmd/cmd_dfu.c > similarity index 100% > rename from common/cmd_dfu.c > rename to cmd/cmd_dfu.c > diff --git a/common/cmd_diag.c b/cmd/cmd_diag.c > similarity index 100% > rename from common/cmd_diag.c > rename to cmd/cmd_diag.c > diff --git a/common/cmd_disk.c b/cmd/cmd_disk.c > similarity index 100% > rename from common/cmd_disk.c > rename to cmd/cmd_disk.c > diff --git a/common/cmd_display.c b/cmd/cmd_display.c > similarity index 100% > rename from common/cmd_display.c > rename to cmd/cmd_display.c > diff --git a/common/cmd_dtt.c b/cmd/cmd_dtt.c > similarity index 100% > rename from common/cmd_dtt.c > rename to cmd/cmd_dtt.c > diff --git a/common/cmd_echo.c b/cmd/cmd_echo.c > similarity index 100% > rename from common/cmd_echo.c > rename to cmd/cmd_echo.c > diff --git a/common/cmd_eeprom.c b/cmd/cmd_eeprom.c > similarity index 100% > rename from common/cmd_eeprom.c > rename to cmd/cmd_eeprom.c > diff --git a/common/cmd_efi.c b/cmd/cmd_efi.c > similarity index 100% > rename from common/cmd_efi.c > rename to cmd/cmd_efi.c > diff --git a/common/cmd_elf.c b/cmd/cmd_elf.c > similarity index 100% > rename from common/cmd_elf.c > rename to cmd/cmd_elf.c > diff --git a/common/cmd_ethsw.c b/cmd/cmd_ethsw.c > similarity index 100% > rename from common/cmd_ethsw.c > rename to cmd/cmd_ethsw.c > diff --git a/common/cmd_exit.c b/cmd/cmd_exit.c > similarity index 100% > rename from common/cmd_exit.c > rename to cmd/cmd_exit.c > diff --git a/common/cmd_ext2.c b/cmd/cmd_ext2.c > similarity index 100% > rename from common/cmd_ext2.c > rename to cmd/cmd_ext2.c > diff --git a/common/cmd_ext4.c b/cmd/cmd_ext4.c > similarity index 100% > rename from common/cmd_ext4.c > rename to cmd/cmd_ext4.c > diff --git a/common/cmd_fastboot.c b/cmd/cmd_fastboot.c > similarity index 100% > rename from common/cmd_fastboot.c > rename to cmd/cmd_fastboot.c > diff --git a/common/cmd_fat.c b/cmd/cmd_fat.c > similarity index 100% > rename from common/cmd_fat.c > rename to cmd/cmd_fat.c > diff --git a/common/cmd_fdc.c b/cmd/cmd_fdc.c > similarity index 100% > rename from common/cmd_fdc.c > rename to cmd/cmd_fdc.c > diff --git a/common/cmd_fdt.c b/cmd/cmd_fdt.c > similarity index 100% > rename from common/cmd_fdt.c > rename to cmd/cmd_fdt.c > diff --git a/common/cmd_fitupd.c b/cmd/cmd_fitupd.c > similarity index 100% > rename from common/cmd_fitupd.c > rename to cmd/cmd_fitupd.c > diff --git a/common/cmd_flash.c b/cmd/cmd_flash.c > similarity index 100% > rename from common/cmd_flash.c > rename to cmd/cmd_flash.c > diff --git a/common/cmd_fpga.c b/cmd/cmd_fpga.c > similarity index 100% > rename from common/cmd_fpga.c > rename to cmd/cmd_fpga.c > diff --git a/common/cmd_fpgad.c b/cmd/cmd_fpgad.c > similarity index 100% > rename from common/cmd_fpgad.c > rename to cmd/cmd_fpgad.c > diff --git a/common/cmd_fs.c b/cmd/cmd_fs.c > similarity index 100% > rename from common/cmd_fs.c > rename to cmd/cmd_fs.c > diff --git a/common/cmd_fs_uuid.c b/cmd/cmd_fs_uuid.c > similarity index 100% > rename from common/cmd_fs_uuid.c > rename to cmd/cmd_fs_uuid.c > diff --git a/common/cmd_fuse.c b/cmd/cmd_fuse.c > similarity index 100% > rename from common/cmd_fuse.c > rename to cmd/cmd_fuse.c > diff --git a/common/cmd_gettime.c b/cmd/cmd_gettime.c > similarity index 100% > rename from common/cmd_gettime.c > rename to cmd/cmd_gettime.c > diff --git a/common/cmd_gpio.c b/cmd/cmd_gpio.c > similarity index 100% > rename from common/cmd_gpio.c > rename to cmd/cmd_gpio.c > diff --git a/common/cmd_gpt.c b/cmd/cmd_gpt.c > similarity index 100% > rename from common/cmd_gpt.c > rename to cmd/cmd_gpt.c > diff --git a/common/cmd_hash.c b/cmd/cmd_hash.c > similarity index 100% > rename from common/cmd_hash.c > rename to cmd/cmd_hash.c > diff --git a/common/cmd_help.c b/cmd/cmd_help.c > similarity index 100% > rename from common/cmd_help.c > rename to cmd/cmd_help.c > diff --git a/common/cmd_host.c b/cmd/cmd_host.c > similarity index 100% > rename from common/cmd_host.c > rename to cmd/cmd_host.c > diff --git a/common/cmd_i2c.c b/cmd/cmd_i2c.c > similarity index 100% > rename from common/cmd_i2c.c > rename to cmd/cmd_i2c.c > diff --git a/common/cmd_ide.c b/cmd/cmd_ide.c > similarity index 100% > rename from common/cmd_ide.c > rename to cmd/cmd_ide.c > diff --git a/common/cmd_immap.c b/cmd/cmd_immap.c > similarity index 100% > rename from common/cmd_immap.c > rename to cmd/cmd_immap.c > diff --git a/common/cmd_ini.c b/cmd/cmd_ini.c > similarity index 100% > rename from common/cmd_ini.c > rename to cmd/cmd_ini.c > diff --git a/common/cmd_io.c b/cmd/cmd_io.c > similarity index 100% > rename from common/cmd_io.c > rename to cmd/cmd_io.c > diff --git a/common/cmd_iotrace.c b/cmd/cmd_iotrace.c > similarity index 100% > rename from common/cmd_iotrace.c > rename to cmd/cmd_iotrace.c > diff --git a/common/cmd_irq.c b/cmd/cmd_irq.c > similarity index 100% > rename from common/cmd_irq.c > rename to cmd/cmd_irq.c > diff --git a/common/cmd_itest.c b/cmd/cmd_itest.c > similarity index 100% > rename from common/cmd_itest.c > rename to cmd/cmd_itest.c > diff --git a/common/cmd_jffs2.c b/cmd/cmd_jffs2.c > similarity index 100% > rename from common/cmd_jffs2.c > rename to cmd/cmd_jffs2.c > diff --git a/common/cmd_ldrinfo.c b/cmd/cmd_ldrinfo.c > similarity index 100% > rename from common/cmd_ldrinfo.c > rename to cmd/cmd_ldrinfo.c > diff --git a/common/cmd_led.c b/cmd/cmd_led.c > similarity index 100% > rename from common/cmd_led.c > rename to cmd/cmd_led.c > diff --git a/common/cmd_license.c b/cmd/cmd_license.c > similarity index 100% > rename from common/cmd_license.c > rename to cmd/cmd_license.c > diff --git a/common/cmd_load.c b/cmd/cmd_load.c > similarity index 100% > rename from common/cmd_load.c > rename to cmd/cmd_load.c > diff --git a/common/cmd_log.c b/cmd/cmd_log.c > similarity index 100% > rename from common/cmd_log.c > rename to cmd/cmd_log.c > diff --git a/common/cmd_lzmadec.c b/cmd/cmd_lzmadec.c > similarity index 100% > rename from common/cmd_lzmadec.c > rename to cmd/cmd_lzmadec.c > diff --git a/common/cmd_mac.c b/cmd/cmd_mac.c > similarity index 100% > rename from common/cmd_mac.c > rename to cmd/cmd_mac.c > diff --git a/common/cmd_md5sum.c b/cmd/cmd_md5sum.c > similarity index 100% > rename from common/cmd_md5sum.c > rename to cmd/cmd_md5sum.c > diff --git a/common/cmd_mdio.c b/cmd/cmd_mdio.c > similarity index 100% > rename from common/cmd_mdio.c > rename to cmd/cmd_mdio.c > diff --git a/common/cmd_mem.c b/cmd/cmd_mem.c > similarity index 100% > rename from common/cmd_mem.c > rename to cmd/cmd_mem.c > diff --git a/common/cmd_mfsl.c b/cmd/cmd_mfsl.c > similarity index 100% > rename from common/cmd_mfsl.c > rename to cmd/cmd_mfsl.c > diff --git a/common/cmd_mii.c b/cmd/cmd_mii.c > similarity index 100% > rename from common/cmd_mii.c > rename to cmd/cmd_mii.c > diff --git a/common/cmd_misc.c b/cmd/cmd_misc.c > similarity index 100% > rename from common/cmd_misc.c > rename to cmd/cmd_misc.c > diff --git a/common/cmd_mmc.c b/cmd/cmd_mmc.c > similarity index 100% > rename from common/cmd_mmc.c > rename to cmd/cmd_mmc.c > diff --git a/common/cmd_mmc_spi.c b/cmd/cmd_mmc_spi.c > similarity index 100% > rename from common/cmd_mmc_spi.c > rename to cmd/cmd_mmc_spi.c > diff --git a/common/cmd_mp.c b/cmd/cmd_mp.c > similarity index 100% > rename from common/cmd_mp.c > rename to cmd/cmd_mp.c > diff --git a/common/cmd_mtdparts.c b/cmd/cmd_mtdparts.c > similarity index 100% > rename from common/cmd_mtdparts.c > rename to cmd/cmd_mtdparts.c > diff --git a/common/cmd_nand.c b/cmd/cmd_nand.c > similarity index 100% > rename from common/cmd_nand.c > rename to cmd/cmd_nand.c > diff --git a/common/cmd_net.c b/cmd/cmd_net.c > similarity index 100% > rename from common/cmd_net.c > rename to cmd/cmd_net.c > diff --git a/common/cmd_nvedit.c b/cmd/cmd_nvedit.c > similarity index 100% > rename from common/cmd_nvedit.c > rename to cmd/cmd_nvedit.c > diff --git a/common/cmd_onenand.c b/cmd/cmd_onenand.c > similarity index 100% > rename from common/cmd_onenand.c > rename to cmd/cmd_onenand.c > diff --git a/common/cmd_otp.c b/cmd/cmd_otp.c > similarity index 100% > rename from common/cmd_otp.c > rename to cmd/cmd_otp.c > diff --git a/common/cmd_part.c b/cmd/cmd_part.c > similarity index 100% > rename from common/cmd_part.c > rename to cmd/cmd_part.c > diff --git a/common/cmd_pci.c b/cmd/cmd_pci.c > similarity index 100% > rename from common/cmd_pci.c > rename to cmd/cmd_pci.c > diff --git a/common/cmd_pcmcia.c b/cmd/cmd_pcmcia.c > similarity index 100% > rename from common/cmd_pcmcia.c > rename to cmd/cmd_pcmcia.c > diff --git a/common/cmd_pmic.c b/cmd/cmd_pmic.c > similarity index 100% > rename from common/cmd_pmic.c > rename to cmd/cmd_pmic.c > diff --git a/common/cmd_portio.c b/cmd/cmd_portio.c > similarity index 100% > rename from common/cmd_portio.c > rename to cmd/cmd_portio.c > diff --git a/common/cmd_pxe.c b/cmd/cmd_pxe.c > similarity index 100% > rename from common/cmd_pxe.c > rename to cmd/cmd_pxe.c > diff --git a/common/cmd_read.c b/cmd/cmd_read.c > similarity index 100% > rename from common/cmd_read.c > rename to cmd/cmd_read.c > diff --git a/common/cmd_reginfo.c b/cmd/cmd_reginfo.c > similarity index 100% > rename from common/cmd_reginfo.c > rename to cmd/cmd_reginfo.c > diff --git a/common/cmd_regulator.c b/cmd/cmd_regulator.c > similarity index 100% > rename from common/cmd_regulator.c > rename to cmd/cmd_regulator.c > diff --git a/common/cmd_reiser.c b/cmd/cmd_reiser.c > similarity index 100% > rename from common/cmd_reiser.c > rename to cmd/cmd_reiser.c > diff --git a/common/cmd_remoteproc.c b/cmd/cmd_remoteproc.c > similarity index 100% > rename from common/cmd_remoteproc.c > rename to cmd/cmd_remoteproc.c > diff --git a/common/cmd_sata.c b/cmd/cmd_sata.c > similarity index 100% > rename from common/cmd_sata.c > rename to cmd/cmd_sata.c > diff --git a/common/cmd_scsi.c b/cmd/cmd_scsi.c > similarity index 100% > rename from common/cmd_scsi.c > rename to cmd/cmd_scsi.c > diff --git a/common/cmd_setexpr.c b/cmd/cmd_setexpr.c > similarity index 100% > rename from common/cmd_setexpr.c > rename to cmd/cmd_setexpr.c > diff --git a/common/cmd_sf.c b/cmd/cmd_sf.c > similarity index 100% > rename from common/cmd_sf.c > rename to cmd/cmd_sf.c > diff --git a/common/cmd_sha1sum.c b/cmd/cmd_sha1sum.c > similarity index 100% > rename from common/cmd_sha1sum.c > rename to cmd/cmd_sha1sum.c > diff --git a/common/cmd_softswitch.c b/cmd/cmd_softswitch.c > similarity index 100% > rename from common/cmd_softswitch.c > rename to cmd/cmd_softswitch.c > diff --git a/common/cmd_sound.c b/cmd/cmd_sound.c > similarity index 100% > rename from common/cmd_sound.c > rename to cmd/cmd_sound.c > diff --git a/common/cmd_source.c b/cmd/cmd_source.c > similarity index 100% > rename from common/cmd_source.c > rename to cmd/cmd_source.c > diff --git a/common/cmd_spi.c b/cmd/cmd_spi.c > similarity index 100% > rename from common/cmd_spi.c > rename to cmd/cmd_spi.c > diff --git a/common/cmd_spibootldr.c b/cmd/cmd_spibootldr.c > similarity index 100% > rename from common/cmd_spibootldr.c > rename to cmd/cmd_spibootldr.c > diff --git a/common/cmd_spl.c b/cmd/cmd_spl.c > similarity index 100% > rename from common/cmd_spl.c > rename to cmd/cmd_spl.c > diff --git a/common/cmd_strings.c b/cmd/cmd_strings.c > similarity index 100% > rename from common/cmd_strings.c > rename to cmd/cmd_strings.c > diff --git a/common/cmd_terminal.c b/cmd/cmd_terminal.c > similarity index 100% > rename from common/cmd_terminal.c > rename to cmd/cmd_terminal.c > diff --git a/common/cmd_test.c b/cmd/cmd_test.c > similarity index 100% > rename from common/cmd_test.c > rename to cmd/cmd_test.c > diff --git a/common/cmd_thordown.c b/cmd/cmd_thordown.c > similarity index 100% > rename from common/cmd_thordown.c > rename to cmd/cmd_thordown.c > diff --git a/common/cmd_time.c b/cmd/cmd_time.c > similarity index 100% > rename from common/cmd_time.c > rename to cmd/cmd_time.c > diff --git a/common/cmd_tpm.c b/cmd/cmd_tpm.c > similarity index 100% > rename from common/cmd_tpm.c > rename to cmd/cmd_tpm.c > diff --git a/common/cmd_tpm_test.c b/cmd/cmd_tpm_test.c > similarity index 100% > rename from common/cmd_tpm_test.c > rename to cmd/cmd_tpm_test.c > diff --git a/common/cmd_trace.c b/cmd/cmd_trace.c > similarity index 100% > rename from common/cmd_trace.c > rename to cmd/cmd_trace.c > diff --git a/common/cmd_tsi148.c b/cmd/cmd_tsi148.c > similarity index 100% > rename from common/cmd_tsi148.c > rename to cmd/cmd_tsi148.c > diff --git a/common/cmd_ubi.c b/cmd/cmd_ubi.c > similarity index 100% > rename from common/cmd_ubi.c > rename to cmd/cmd_ubi.c > diff --git a/common/cmd_ubifs.c b/cmd/cmd_ubifs.c > similarity index 100% > rename from common/cmd_ubifs.c > rename to cmd/cmd_ubifs.c > diff --git a/common/cmd_universe.c b/cmd/cmd_universe.c > similarity index 100% > rename from common/cmd_universe.c > rename to cmd/cmd_universe.c > diff --git a/common/cmd_unzip.c b/cmd/cmd_unzip.c > similarity index 100% > rename from common/cmd_unzip.c > rename to cmd/cmd_unzip.c > diff --git a/common/cmd_usb.c b/cmd/cmd_usb.c > similarity index 100% > rename from common/cmd_usb.c > rename to cmd/cmd_usb.c > diff --git a/common/cmd_usb_mass_storage.c b/cmd/cmd_usb_mass_storage.c > similarity index 100% > rename from common/cmd_usb_mass_storage.c > rename to cmd/cmd_usb_mass_storage.c > diff --git a/common/cmd_version.c b/cmd/cmd_version.c > similarity index 100% > rename from common/cmd_version.c > rename to cmd/cmd_version.c > diff --git a/common/cmd_ximg.c b/cmd/cmd_ximg.c > similarity index 100% > rename from common/cmd_ximg.c > rename to cmd/cmd_ximg.c > diff --git a/common/cmd_yaffs2.c b/cmd/cmd_yaffs2.c > similarity index 100% > rename from common/cmd_yaffs2.c > rename to cmd/cmd_yaffs2.c > diff --git a/common/cmd_zfs.c b/cmd/cmd_zfs.c > similarity index 100% > rename from common/cmd_zfs.c > rename to cmd/cmd_zfs.c > diff --git a/common/cmd_zip.c b/cmd/cmd_zip.c > similarity index 100% > rename from common/cmd_zip.c > rename to cmd/cmd_zip.c > diff --git a/common/Kconfig b/common/Kconfig > index 9d446bf..067545d 100644 > --- a/common/Kconfig > +++ b/common/Kconfig > @@ -1,522 +1,3 @@ > -menu "Command line interface" > - > -config HUSH_PARSER > - bool "Use hush shell" > - select SYS_HUSH_PARSER > - help > - This option enables the "hush" shell (from Busybox) as command line > - interpreter, thus enabling powerful command line syntax like > - if...then...else...fi conditionals or `&&' and '||' > - constructs ("shell scripts"). > - > - If disabled, you get the old, much simpler behaviour with a somewhat > - smaller memory footprint. > - > -config SYS_HUSH_PARSER > - bool > - help > - Backward compatibility. > - > -config SYS_PROMPT > - string "Shell prompt" > - default "=> " > - help > - This string is displayed in the command line to the left of the > - cursor. > - > -menu "Autoboot options" > - > -config AUTOBOOT_KEYED > - bool "Stop autobooting via specific input key / string" > - default n > - help > - This option enables stopping (aborting) of the automatic > - boot feature only by issuing a specific input key or > - string. If not enabled, any input key will abort the > - U-Boot automatic booting process and bring the device > - to the U-Boot prompt for user input. > - > -config AUTOBOOT_PROMPT > - string "Autoboot stop prompt" > - depends on AUTOBOOT_KEYED > - default "Autoboot in %d seconds\\n" > - help > - This string is displayed before the boot delay selected by > - CONFIG_BOOTDELAY starts. If it is not defined there is no > - output indicating that autoboot is in progress. > - > - Note that this define is used as the (only) argument to a > - printf() call, so it may contain '%' format specifications, > - provided that it also includes, sepearated by commas exactly > - like in a printf statement, the required arguments. It is > - the responsibility of the user to select only such arguments > - that are valid in the given context. > - > -config AUTOBOOT_ENCRYPTION > - bool "Enable encryption in autoboot stopping" > - depends on AUTOBOOT_KEYED > - default n > - > -config AUTOBOOT_DELAY_STR > - string "Delay autobooting via specific input key / string" > - depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION > - help > - This option delays the automatic boot feature by issuing > - a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR > - or the environment variable "bootdelaykey" is specified > - and this string is received from console input before > - autoboot starts booting, U-Boot gives a command prompt. The > - U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is > - used, otherwise it never times out. > - > -config AUTOBOOT_STOP_STR > - string "Stop autobooting via specific input key / string" > - depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION > - help > - This option enables stopping (aborting) of the automatic > - boot feature only by issuing a specific input key or > - string. If CONFIG_AUTOBOOT_STOP_STR or the environment > - variable "bootstopkey" is specified and this string is > - received from console input before autoboot starts booting, > - U-Boot gives a command prompt. The U-Boot prompt never > - times out, even if CONFIG_BOOT_RETRY_TIME is used. > - > -config AUTOBOOT_KEYED_CTRLC > - bool "Enable Ctrl-C autoboot interruption" > - depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION > - default n > - help > - This option allows for the boot sequence to be interrupted > - by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey". > - Setting this variable provides an escape sequence from the > - limited "password" strings. > - > -config AUTOBOOT_STOP_STR_SHA256 > - string "Stop autobooting via SHA256 encrypted password" > - depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION > - help > - This option adds the feature to only stop the autobooting, > - and therefore boot into the U-Boot prompt, when the input > - string / password matches a values that is encypted via > - a SHA256 hash and saved in the environment. > - > -endmenu > - > -comment "Commands" > - > -menu "Info commands" > - > -config CMD_BDI > - bool "bdinfo" > - default y > - help > - Print board info > - > -config CMD_CONSOLE > - bool "coninfo" > - default y > - help > - Print console devices and information. > - > -config CMD_CPU > - bool "cpu" > - help > - Print information about available CPUs. This normally shows the > - number of CPUs, type (e.g. manufacturer, architecture, product or > - internal name) and clock frequency. Other information may be > - available depending on the CPU driver. > - > -config CMD_LICENSE > - bool "license" > - help > - Print GPL license text > - > -endmenu > - > -menu "Boot commands" > - > -config CMD_BOOTD > - bool "bootd" > - default y > - help > - Run the command stored in the environment "bootcmd", i.e. > - "bootd" does the same thing as "run bootcmd". > - > -config CMD_BOOTM > - bool "bootm" > - default y > - help > - Boot an application image from the memory. > - > -config CMD_ELF > - bool "bootelf, bootvx" > - default y > - help > - Boot an ELF/vxWorks image from the memory. > - > -config CMD_GO > - bool "go" > - default y > - help > - Start an application at a given address. > - > -config CMD_RUN > - bool "run" > - default y > - help > - Run the command in the given environment variable. > - > -config CMD_IMI > - bool "iminfo" > - default y > - help > - Print header information for application image. > - > -config CMD_IMLS > - bool "imls" > - default y > - help > - List all images found in flash > - > -config CMD_XIMG > - bool "imxtract" > - default y > - help > - Extract a part of a multi-image. > - > -config CMD_POWEROFF > - bool > - > -endmenu > - > -menu "Environment commands" > - > -config CMD_EXPORTENV > - bool "env export" > - default y > - help > - Export environments. > - > -config CMD_IMPORTENV > - bool "env import" > - default y > - help > - Import environments. > - > -config CMD_EDITENV > - bool "editenv" > - default y > - help > - Edit environment variable. > - > -config CMD_SAVEENV > - bool "saveenv" > - default y > - help > - Save all environment variables into the compiled-in persistent > - storage. > - > -config CMD_ENV_EXISTS > - bool "env exists" > - default y > - help > - Check if a variable is defined in the environment for use in > - shell scripting. > - > -endmenu > - > -menu "Memory commands" > - > -config CMD_MEMORY > - bool "md, mm, nm, mw, cp, cmp, base, loop" > - default y > - help > - Memeory commands. > - md - memory display > - mm - memory modify (auto-incrementing address) > - nm - memory modify (constant address) > - mw - memory write (fill) > - cp - memory copy > - cmp - memory compare > - base - print or set address offset > - loop - initinite loop on address range > - > -config CMD_CRC32 > - bool "crc32" > - default y > - help > - Compute CRC32. > - > -config LOOPW > - bool "loopw" > - help > - Infinite write loop on address range > - > -config CMD_MEMTEST > - bool "memtest" > - help > - Simple RAM read/write test. > - > -config CMD_MX_CYCLIC > - bool "mdc, mwc" > - help > - mdc - memory display cyclic > - mwc - memory write cyclic > - > -config CMD_MEMINFO > - bool "meminfo" > - help > - Display memory information. > - > -endmenu > - > -menu "Device access commands" > - > -config CMD_DM > - bool "dm - Access to driver model information" > - depends on DM > - default y > - help > - Provides access to driver model data structures and information, > - such as a list of devices, list of uclasses and the state of each > - device (e.g. activated). This is not required for operation, but > - can be useful to see the state of driver model for debugging or > - interest. > - > -config CMD_DEMO > - bool "demo - Demonstration commands for driver model" > - depends on DM > - help > - Provides a 'demo' command which can be used to play around with > - driver model. To use this properly you will need to enable one or > - both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). > - Otherwise you will always get an empty list of devices. The demo > - devices are defined in the sandbox device tree, so the easiest > - option is to use sandbox and pass the -d point to sandbox's > - u-boot.dtb file. > - > -config CMD_LOADB > - bool "loadb" > - default y > - help > - Load a binary file over serial line. > - > -config CMD_LOADS > - bool "loads" > - default y > - help > - Load an S-Record file over serial line > - > -config CMD_FLASH > - bool "flinfo, erase, protect" > - default y > - help > - NOR flash support. > - flinfo - print FLASH memory information > - erase - FLASH memory > - protect - enable or disable FLASH write protection > - > -config CMD_ARMFLASH > - depends on FLASH_CFI_DRIVER > - bool "armflash" > - help > - ARM Ltd reference designs flash partition access > - > -config CMD_NAND > - bool "nand" > - help > - NAND support. > - > -config CMD_SF > - bool "sf" > - help > - SPI Flash support > - > -config CMD_SPI > - bool "sspi" > - help > - SPI utility command. > - > -config CMD_I2C > - bool "i2c" > - help > - I2C support. > - > -config CMD_USB > - bool "usb" > - help > - USB support. > - > -config CMD_FPGA > - bool "fpga" > - default y > - help > - FPGA support. > - > -config CMD_REMOTEPROC > - bool "remoteproc" > - depends on REMOTEPROC > - help > - Support for Remote Processor control > - > -config CMD_GPIO > - bool "gpio" > - help > - GPIO support. > - > -endmenu > - > - > -menu "Shell scripting commands" > - > -config CMD_ECHO > - bool "echo" > - default y > - help > - Echo args to console > - > -config CMD_ITEST > - bool "itest" > - default y > - help > - Return true/false on integer compare. > - > -config CMD_SOURCE > - bool "source" > - default y > - help > - Run script from memory > - > -config CMD_SETEXPR > - bool "setexpr" > - default y > - help > - Evaluate boolean and math expressions and store the result in an env > - variable. > - Also supports loading the value at a memory location into a variable. > - If CONFIG_REGEX is enabled, setexpr also supports a gsub function. > - > -endmenu > - > -menu "Network commands" > - > -config CMD_NET > - bool "bootp, tftpboot" > - select NET > - default y > - help > - Network commands. > - bootp - boot image via network using BOOTP/TFTP protocol > - tftpboot - boot image via network using TFTP protocol > - > -config CMD_TFTPPUT > - bool "tftp put" > - help > - TFTP put command, for uploading files to a server > - > -config CMD_TFTPSRV > - bool "tftpsrv" > - help > - Act as a TFTP server and boot the first received file > - > -config CMD_RARP > - bool "rarpboot" > - help > - Boot image via network using RARP/TFTP protocol > - > -config CMD_DHCP > - bool "dhcp" > - help > - Boot image via network using DHCP/TFTP protocol > - > -config CMD_NFS > - bool "nfs" > - default y > - help > - Boot image via network using NFS protocol. > - > -config CMD_PING > - bool "ping" > - help > - Send ICMP ECHO_REQUEST to network host > - > -config CMD_CDP > - bool "cdp" > - help > - Perform CDP network configuration > - > -config CMD_SNTP > - bool "sntp" > - help > - Synchronize RTC via network > - > -config CMD_DNS > - bool "dns" > - help > - Lookup the IP of a hostname > - > -config CMD_LINK_LOCAL > - bool "linklocal" > - help > - Acquire a network IP address using the link-local protocol > - > -endmenu > - > -menu "Misc commands" > - > -config CMD_AMBAPP > - bool "ambapp" > - depends on LEON3 > - default y > - help > - Lists AMBA Plug-n-Play information. > - > -config SYS_AMBAPP_PRINT_ON_STARTUP > - bool "Show AMBA PnP info on startup" > - depends on CMD_AMBAPP > - default n > - help > - Show AMBA Plug-n-Play information on startup. > - > -config CMD_TIME > - bool "time" > - help > - Run commands and summarize execution time. > - > -# TODO: rename to CMD_SLEEP > -config CMD_MISC > - bool "sleep" > - default y > - help > - Delay execution for some time > - > -config CMD_TIMER > - bool "timer" > - help > - Access the system timer. > - > -config CMD_SETGETDCR > - bool "getdcr, setdcr, getidcr, setidcr" > - depends on 4xx > - default y > - help > - getdcr - Get an AMCC PPC 4xx DCR's value > - setdcr - Set an AMCC PPC 4xx DCR's value > - getidcr - Get a register value via indirect DCR addressing > - setidcr - Set a register value via indirect DCR addressing > - > -config CMD_SOUND > - bool "sound" > - depends on SOUND > - help > - This provides basic access to the U-Boot's sound support. The main > - feature is to play a beep. > - > - sound init - set up sound system > - sound play - play a sound > - > -endmenu > - > menu "Boot timing" > > config BOOTSTAGE > @@ -565,13 +46,6 @@ config BOOTSTAGE_USER_COUNT > a new ID will be allocated from this stash. If you exceed > the limit, recording will stop. > > -config CMD_BOOTSTAGE > - bool "Enable the 'bootstage' command" > - depends on BOOTSTAGE > - help > - Add a 'bootstage' command which supports printing a report > - and un/stashing of bootstage data. > - > config BOOTSTAGE_FDT > bool "Store boot timing information in the OS device tree" > depends on BOOTSTAGE > @@ -623,66 +97,6 @@ config BOOTSTAGE_STASH_SIZE > > endmenu > > -menu "Power commands" > -config CMD_PMIC > - bool "Enable Driver Model PMIC command" > - depends on DM_PMIC > - help > - This is the pmic command, based on a driver model pmic's API. > - Command features are unchanged: > - - list - list pmic devices > - - pmic dev - show or [set] operating pmic device (NEW) > - - pmic dump - dump registers > - - pmic read address - read byte of register at address > - - pmic write address - write byte to register at address > - The only one change for this command is 'dev' subcommand. > - > -config CMD_REGULATOR > - bool "Enable Driver Model REGULATOR command" > - depends on DM_REGULATOR > - help > - This command is based on driver model regulator's API. > - User interface features: > - - list - list regulator devices > - - regulator dev - show or [set] operating regulator device > - - regulator info - print constraints info > - - regulator status - print operating status > - - regulator value - print/[set] voltage value [uV] > - - regulator current - print/[set] current value [uA] > - - regulator mode - print/[set] operating mode id > - - regulator enable - enable the regulator output > - - regulator disable - disable the regulator output > - > - The '-f' (force) option can be used for set the value which exceeds > - the limits, which are found in device-tree and are kept in regulator's > - uclass platdata structure. > - > -endmenu > - > -menu "Security commands" > -config CMD_TPM > - bool "Enable the 'tpm' command" > - depends on TPM > - help > - This provides a means to talk to a TPM from the command line. A wide > - range of commands if provided - see 'tpm help' for details. The > - command requires a suitable TPM on your board and the correct driver > - must be enabled. > - > -config CMD_TPM_TEST > - bool "Enable the 'tpm test' command" > - depends on CMD_TPM > - help > - This provides a a series of tests to confirm that the TPM is working > - correctly. The tests cover initialisation, non-volatile RAM, extend, > - global lock and checking that timing is within expectations. The > - tests pass correctly on Infineon TPMs but may need to be adjusted > - for other devices. > - > -endmenu > - > -endmenu > - > config CONSOLE_RECORD > bool "Console recording" > help > diff --git a/common/Makefile b/common/Makefile > index 2a1d9f8..fcf972d 100644 > --- a/common/Makefile > +++ b/common/Makefile > @@ -31,11 +31,7 @@ obj-$(CONFIG_SYS_GENERIC_BOARD) += board_r.o > obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o > obj-$(CONFIG_DISPLAY_BOARDINFO_LATE) += board_info.o > > -# core command > -obj-y += cmd_boot.o > -obj-$(CONFIG_CMD_BOOTM) += cmd_bootm.o bootm.o bootm_os.o > -obj-y += cmd_help.o > -obj-y += cmd_version.o > +obj-$(CONFIG_CMD_BOOTM) += bootm.o bootm_os.o > > # environment > obj-y += env_attr.o > @@ -58,143 +54,17 @@ obj-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o > obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o > obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o > > -# command > -obj-$(CONFIG_CMD_AES) += cmd_aes.o > -obj-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o > -obj-$(CONFIG_CMD_ARMFLASH) += cmd_armflash.o > -obj-$(CONFIG_SOURCE) += cmd_source.o > -obj-$(CONFIG_CMD_SOURCE) += cmd_source.o > -obj-$(CONFIG_CMD_BDI) += cmd_bdinfo.o > -obj-$(CONFIG_CMD_BEDBUG) += bedbug.o cmd_bedbug.o > -obj-$(CONFIG_CMD_BMP) += cmd_bmp.o > -obj-$(CONFIG_CMD_BOOTMENU) += cmd_bootmenu.o > -obj-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o > -obj-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o > -obj-$(CONFIG_CMD_CACHE) += cmd_cache.o > -obj-$(CONFIG_CMD_CBFS) += cmd_cbfs.o > -obj-$(CONFIG_CMD_CLK) += cmd_clk.o > -obj-$(CONFIG_CMD_CONSOLE) += cmd_console.o > -obj-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o > -obj-$(CONFIG_CMD_CPU) += cmd_cpu.o > -obj-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o > -obj-$(CONFIG_CMD_DATE) += cmd_date.o > -obj-$(CONFIG_CMD_DEMO) += cmd_demo.o > -obj-$(CONFIG_CMD_SOUND) += cmd_sound.o > -ifdef CONFIG_4xx > -obj-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o > -endif > -ifdef CONFIG_POST > -obj-$(CONFIG_CMD_DIAG) += cmd_diag.o > -endif > -obj-$(CONFIG_CMD_DISPLAY) += cmd_display.o > -obj-$(CONFIG_CMD_DTT) += cmd_dtt.o > -obj-$(CONFIG_CMD_ECHO) += cmd_echo.o > -obj-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o > -obj-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o > -obj-$(CONFIG_EFI_STUB) += cmd_efi.o > -obj-$(CONFIG_CMD_ELF) += cmd_elf.o > -obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o > -obj-$(CONFIG_CMD_EXT4) += cmd_ext4.o > -obj-$(CONFIG_CMD_EXT2) += cmd_ext2.o > -obj-$(CONFIG_CMD_FAT) += cmd_fat.o > -obj-$(CONFIG_CMD_FDC) += cmd_fdc.o > -obj-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o > -obj-$(CONFIG_CMD_FITUPD) += cmd_fitupd.o > -obj-$(CONFIG_CMD_FLASH) += cmd_flash.o > -ifdef CONFIG_FPGA > -obj-$(CONFIG_CMD_FPGA) += cmd_fpga.o > -endif > -obj-$(CONFIG_CMD_FPGAD) += cmd_fpgad.o > -obj-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o > -obj-$(CONFIG_CMD_FUSE) += cmd_fuse.o > -obj-$(CONFIG_CMD_GETTIME) += cmd_gettime.o > -obj-$(CONFIG_CMD_GPIO) += cmd_gpio.o > -obj-$(CONFIG_CMD_I2C) += cmd_i2c.o > -obj-$(CONFIG_CMD_IOTRACE) += cmd_iotrace.o > -obj-$(CONFIG_CMD_HASH) += cmd_hash.o > -obj-$(CONFIG_CMD_IDE) += cmd_ide.o > -obj-$(CONFIG_CMD_IMMAP) += cmd_immap.o > -obj-$(CONFIG_CMD_INI) += cmd_ini.o > -obj-$(CONFIG_CMD_IRQ) += cmd_irq.o > -obj-$(CONFIG_CMD_ITEST) += cmd_itest.o > -obj-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o > -obj-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o > -obj-$(CONFIG_CMD_LDRINFO) += cmd_ldrinfo.o > -obj-$(CONFIG_CMD_LED) += cmd_led.o > -obj-$(CONFIG_CMD_LICENSE) += cmd_license.o > -obj-y += cmd_load.o > -obj-$(CONFIG_LOGBUFFER) += cmd_log.o > -obj-$(CONFIG_ID_EEPROM) += cmd_mac.o > -obj-$(CONFIG_CMD_MD5SUM) += cmd_md5sum.o > -obj-$(CONFIG_CMD_MEMORY) += cmd_mem.o > -obj-$(CONFIG_CMD_IO) += cmd_io.o > -obj-$(CONFIG_CMD_MFSL) += cmd_mfsl.o > +obj-$(CONFIG_CMD_BEDBUG) += bedbug.o > +obj-$(CONFIG_OF_LIBFDT) += fdt_support.o > + > obj-$(CONFIG_MII) += miiphyutil.o > obj-$(CONFIG_CMD_MII) += miiphyutil.o > obj-$(CONFIG_PHYLIB) += miiphyutil.o > -obj-$(CONFIG_CMD_MII) += cmd_mii.o > -ifdef CONFIG_PHYLIB > -obj-$(CONFIG_CMD_MII) += cmd_mdio.o > -endif > -obj-$(CONFIG_CMD_MISC) += cmd_misc.o > -obj-$(CONFIG_CMD_MMC) += cmd_mmc.o > -obj-$(CONFIG_CMD_MMC_SPI) += cmd_mmc_spi.o > -obj-$(CONFIG_MP) += cmd_mp.o > -obj-$(CONFIG_CMD_MTDPARTS) += cmd_mtdparts.o > -obj-$(CONFIG_CMD_NAND) += cmd_nand.o > -obj-$(CONFIG_CMD_NET) += cmd_net.o > -obj-$(CONFIG_CMD_ONENAND) += cmd_onenand.o > -obj-$(CONFIG_CMD_OTP) += cmd_otp.o > -obj-$(CONFIG_CMD_PART) += cmd_part.o > -ifdef CONFIG_PCI > -obj-$(CONFIG_CMD_PCI) += cmd_pci.o > -endif > -obj-y += cmd_pcmcia.o > -obj-$(CONFIG_CMD_PORTIO) += cmd_portio.o > -obj-$(CONFIG_CMD_PXE) += cmd_pxe.o > -obj-$(CONFIG_CMD_READ) += cmd_read.o > -obj-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o > -obj-$(CONFIG_CMD_REISER) += cmd_reiser.o > -obj-$(CONFIG_CMD_REMOTEPROC) += cmd_remoteproc.o > -obj-$(CONFIG_SANDBOX) += cmd_host.o > -obj-$(CONFIG_CMD_SATA) += cmd_sata.o > -obj-$(CONFIG_CMD_SF) += cmd_sf.o > -obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o > -obj-$(CONFIG_CMD_SHA1SUM) += cmd_sha1sum.o > -obj-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o > -obj-$(CONFIG_CMD_SOFTSWITCH) += cmd_softswitch.o > -obj-$(CONFIG_CMD_SPI) += cmd_spi.o > -obj-$(CONFIG_CMD_SPIBOOTLDR) += cmd_spibootldr.o > -obj-$(CONFIG_CMD_STRINGS) += cmd_strings.o > -obj-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o > -obj-$(CONFIG_CMD_TIME) += cmd_time.o > -obj-$(CONFIG_CMD_TRACE) += cmd_trace.o > -obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_test.o > -obj-$(CONFIG_CMD_TPM) += cmd_tpm.o > -obj-$(CONFIG_CMD_TPM_TEST) += cmd_tpm_test.o > -obj-$(CONFIG_CMD_TSI148) += cmd_tsi148.o > -obj-$(CONFIG_CMD_UBI) += cmd_ubi.o > -obj-$(CONFIG_CMD_UBIFS) += cmd_ubifs.o > -obj-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o > -obj-$(CONFIG_CMD_UNZIP) += cmd_unzip.o > -ifdef CONFIG_LZMA > -obj-$(CONFIG_CMD_LZMADEC) += cmd_lzmadec.o > -endif > + > ifdef CONFIG_CMD_USB > -obj-y += cmd_usb.o > obj-y += usb.o usb_hub.o > obj-$(CONFIG_USB_STORAGE) += usb_storage.o > endif > -obj-$(CONFIG_CMD_FASTBOOT) += cmd_fastboot.o > -obj-$(CONFIG_CMD_FS_UUID) += cmd_fs_uuid.o > - > -obj-$(CONFIG_CMD_USB_MASS_STORAGE) += cmd_usb_mass_storage.o > -obj-$(CONFIG_CMD_THOR_DOWNLOAD) += cmd_thordown.o > -obj-$(CONFIG_CMD_XIMG) += cmd_ximg.o > -obj-$(CONFIG_YAFFS2) += cmd_yaffs2.o > -obj-$(CONFIG_CMD_SPL) += cmd_spl.o > -obj-$(CONFIG_CMD_ZIP) += cmd_zip.o > -obj-$(CONFIG_CMD_ZFS) += cmd_zfs.o > > # others > obj-$(CONFIG_BOOTSTAGE) += bootstage.o > @@ -214,14 +84,8 @@ obj-$(CONFIG_MODEM_SUPPORT) += modem.o > obj-$(CONFIG_UPDATE_TFTP) += update.o > obj-$(CONFIG_DFU_TFTP) += update.o > obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o > -obj-$(CONFIG_CMD_DFU) += cmd_dfu.o > -obj-$(CONFIG_CMD_GPT) += cmd_gpt.o > -obj-$(CONFIG_CMD_ETHSW) += cmd_ethsw.o > > -# Power > -obj-$(CONFIG_CMD_PMIC) += cmd_pmic.o > -obj-$(CONFIG_CMD_REGULATOR) += cmd_regulator.o > -endif > +endif # !CONFIG_SPL_BUILD > > ifdef CONFIG_SPL_BUILD > obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o > @@ -232,9 +96,6 @@ ifdef CONFIG_SPL_USB_HOST_SUPPORT > obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o > obj-$(CONFIG_USB_STORAGE) += usb_storage.o > endif > -ifdef CONFIG_SPL_SATA_SUPPORT > -obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o > -endif > # environment > ifdef CONFIG_SPL_ENV_SUPPORT > obj-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o > @@ -248,8 +109,6 @@ obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o > obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o > endif > endif > -# core command > -obj-y += cmd_nvedit.o > #environment > obj-y += env_common.o > #others > @@ -287,8 +146,6 @@ obj-y += fb_nand.o > endif > endif > > -obj-$(CONFIG_CMD_BLOB) += cmd_blob.o > - > # We always have this since drivers/ddr/fs/interactive.c needs it > obj-y += cli_simple.o > > @@ -297,6 +154,5 @@ obj-y += cli_readline.o > obj-y += command.o > obj-y += s_record.o > obj-y += xyzModem.o > -obj-y += cmd_disk.o > > CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null) > diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl > index 96f414a..dff16b9 100644 > --- a/scripts/Makefile.spl > +++ b/scripts/Makefile.spl > @@ -53,7 +53,7 @@ libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ > > libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/ > libs-y += common/init/ > -libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ > +libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ > libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/ > libs-y += drivers/ > libs-y += dts/ > Acked-by: Przemyslaw Marczak Best regards, -- Przemyslaw Marczak Samsung R&D Institute Poland Samsung Electronics p.marczak at samsung.com